Re: Intel8x0 still broken in 2.6.9-ac16

["David Gómez" <dabisu@gmail.com>]

Hi Takashi ;)

On Fri, 17 Dec 2004 16:39:28 +0100, Takashi Iwai <tiwai@suse.de> wrote:
> > codec_write 0: semaphore is not ready for register 0x2
> > codec_write 0: semaphore is not ready for register 0x2
> > codec_write 0: semaphore is not ready for register 0x2
> 
> This implies that wrong SDI's are assigned to the codec or GLOB_STA
> register shows something different.
> 
> Please attach /proc/asound/card0/intel8x0 and

[huma@miller] [~] % cat /proc/asound/card0/intel8x0 
Intel8x0

Global control        : 0x00000000
Global status         : 0x08700000
SDM                   : 0x00000008
AC'97 codecs ready    : none
AC'97 codecs SDIN     : 0 0 0

> /proc/asound/card0/codec97#0/* files for debugging.

0-0/0: Conexant id 30

Revision         : 0xff
Compat. Class    : 0x1f
Subsys. Vendor ID: 0xffff
Subsys. ID       : 0xffff

Capabilities     : -reserved1- -headphone out-
DAC resolution   : 18-bit
ADC resolution   : 18-bit
3D enhancement   : No 3D Stereo Enhancement

Current setup
Mic gain         : +20dB [+0dB]
POP path         : post 3D
Sim. stereo      : on
3D enhancement   : on
Loudness         : on
Mono output      : Mic
Mic select       : Mic2
ADC/DAC loopback : on
Extended ID      : codec=3 rev=3 AMAP LDAC SDAC CDAC DSA=3 VRM SPDIF DRA VRA
Extended status  : PRL PRK PRJ PRI SPCV MADC LDAC SDAC CDAC SPDIF=res
VRM SPDIF DRA VRA
PCM front DAC    : 65535Hz
PCM Surr DAC     : 65535Hz
PCM LFE DAC      : 65535Hz
PCM ADC          : 65535Hz
PCM MIC ADC      : 65535Hz
SPDIF Control    : PRO Non-audio Preemph50/15 Category=0x7f
Generation=1 Rate=32kHz DRS Validity

                    Gain     Inverted  Buffer delay  Location
Master Out       : -10.5 dBV    X      31/fs         NC/unused
AUX Out          : -10.5 dBV    X      31/fs         NC/unused
Center/LFE Out   : -10.5 dBV    X      31/fs         NC/unused
SPDIF Out        : -10.5 dBV    X      31/fs         NC/unused
Phone In         : -10.5 dBV    X      31/fs         NC/unused
Mic 1            : -10.5 dBV    X      31/fs         NC/unused
Mic 2            : -10.5 dBV    X      31/fs         NC/unused
Line In          : -10.5 dBV    X      31/fs         NC/unused
CD In            : -10.5 dBV    X      31/fs         NC/unused
Video In         : -10.5 dBV    X      31/fs         NC/unused
Aux In           : -10.5 dBV    X      31/fs         NC/unused
Mono Out         : -10.5 dBV    X      31/fs         NC/unused
Extended modem ID: codec=3 CID2 CID1 HSET LIN2 LIN1
Modem status     : GPIO MREF ADC1 DAC1 ADC2 DAC2 HADC HDAC PRA(GPIO)
PRB(res) PRC(ADC1) PRD(DAC1) PRE(ADC2) PRF(DAC2) PRG(HADC) PRH(HDAC)
Line1 rate       : 65535Hz
Line2 rate       : 65535Hz
Headset rate     : 65535Hz


0:00 = ffff
0:02 = ffff
0:04 = ffff
0:06 = ffff
0:08 = ffff
0:0a = ffff
0:0c = ffff
0:0e = ffff
0:10 = ffff
0:12 = ffff
0:14 = ffff
0:16 = ffff
0:18 = ffff
0:1a = ffff
0:1c = ffff
0:1e = ffff
0:20 = ffff
0:22 = ffff
0:24 = ffff
0:26 = ffff
0:28 = ffff
0:2a = ffff
0:2c = ffff
0:2e = ffff
0:30 = ffff
0:32 = ffff
0:34 = ffff
0:36 = ffff
0:38 = ffff
0:3a = ffff
0:3c = ffff
0:3e = ffff
0:40 = ffff
0:42 = ffff
0:44 = ffff
0:46 = ffff
0:48 = ffff
0:4a = ffff
0:4c = ffff
0:4e = ffff
0:50 = ffff
0:52 = ffff
0:54 = ffff
0:56 = ffff
0:58 = ffff
0:5a = ffff
0:5c = ffff
0:5e = ffff
0:60 = ffff
0:62 = ffff
0:64 = ffff
0:66 = ffff
0:68 = ffff
0:6a = ffff
0:6c = ffff
0:6e = ffff
0:70 = ffff
0:72 = ffff
0:74 = ffff
0:76 = ffff
0:78 = ffff
0:7a = ffff
0:7c = ffff
0:7e = ffff


Thanks,


-- 

David Gómez


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/