From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?David_G=F3mez?= Subject: Re: Intel8x0 still broken in 2.6.9-ac16 Date: Wed, 22 Dec 2004 20:22:24 +0100 Message-ID: References: Reply-To: =?ISO-8859-1?Q?David_G=F3mez?= Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi Takashi ;), On Wed, 22 Dec 2004 15:53:32 +0100, Takashi Iwai wrote: > Please show the contents of /proc/asound/card0/codec97#0/* files. > This time they must appear more meaningfully. [huma@miller] [~] % cat /proc/asound/card0/codec97\#0/ac97\#0-0 0-0/0: Conexant id 30 Revision : 0x00 Compat. Class : 0x00 Subsys. Vendor ID: 0x0000 Subsys. ID : 0x0000 Capabilities : -reserved1- -headphone out- DAC resolution : 18-bit ADC resolution : 18-bit 3D enhancement : No 3D Stereo Enhancement Current setup Mic gain : +0dB [+0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=3D0 rev=3D2 AMAP DSA=3D0 SPDIF Extended status : PRL PRK PRJ PRI SPCV SPDIF=3D3/4 SPDIF Control : Consumer PCM Category=3D0x2 Generation=3D1 Rate=3D48kHz Extended modem ID: codec=3D0 LIN1 Modem status : PRA(GPIO) Line1 rate : 48000Hz [huma@miller] [~] % cat /proc/asound/card0/codec97\#0/ac97\#0-0+regs 0:00 =3D 0152 0:02 =3D 0a0a 0:04 =3D 9f1f 0:06 =3D 0000 0:08 =3D 0000 0:0a =3D 8000 0:0c =3D 0000 0:0e =3D 801f 0:10 =3D 9f1f 0:12 =3D 0202 0:14 =3D 0000 0:16 =3D 0000 0:18 =3D 0202 0:1a =3D 0000 0:1c =3D 0000 0:1e =3D 0000 0:20 =3D 0000 0:22 =3D 0000 0:24 =3D 0000 0:26 =3D 000f 0:28 =3D 0a04 0:2a =3D 7c00 0:2c =3D bb80 0:2e =3D 0000 0:30 =3D 0000 0:32 =3D bb80 0:34 =3D 0000 0:36 =3D 0000 0:38 =3D 0000 0:3a =3D 2824 0:3c =3D 0001 0:3e =3D 0100 0:40 =3D bb80 0:42 =3D 0000 0:44 =3D 0000 0:46 =3D 0000 0:48 =3D 0000 0:4a =3D 0000 0:4c =3D 0030 0:4e =3D ffff 0:50 =3D 0000 0:52 =3D 0000 0:54 =3D 0000 0:56 =3D 0000 0:58 =3D 0000 0:5a =3D 0000 0:5c =3D 0600 0:5e =3D 0000 0:60 =3D 0000 0:62 =3D 0000 0:64 =3D 0000 0:66 =3D 0012 0:68 =3D 0000 0:6a =3D 0000 0:6c =3D 0000 0:6e =3D 0000 0:70 =3D 0000 0:72 =3D 0000 0:74 =3D 0000 0:76 =3D 0000 0:78 =3D 0000 0:7a =3D 8004 0:7c =3D 4358 0:7e =3D 5430 > I think we need merge the common codes between intel8x0 and intel8x0m, > and avoid the unnecessary initializations in each driver. ok --=20 David G=F3mez ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/