All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Stoakes <ljs@kernel.org>
To: Ye Liu <ye.liu@linux.dev>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	 David Hildenbrand <david@kernel.org>,
	"Liam R. Howlett" <Liam.Howlett@oracle.com>,
	 Ye Liu <liuye@kylinos.cn>, Vlastimil Babka <vbabka@kernel.org>,
	 Mike Rapoport <rppt@kernel.org>,
	Suren Baghdasaryan <surenb@google.com>,
	 Michal Hocko <mhocko@suse.com>, Kairui Song <kasong@tencent.com>,
	Qi Zheng <qi.zheng@linux.dev>,
	 Shakeel Butt <shakeel.butt@linux.dev>,
	Barry Song <baohua@kernel.org>,
	 Axel Rasmussen <axelrasmussen@google.com>,
	Yuanchu Xie <yuanchu@google.com>, Wei Xu <weixugc@google.com>,
	 Jann Horn <jannh@google.com>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mm: handle potential NULL return from anon_vma_name_reuse()
Date: Tue, 21 Apr 2026 10:08:23 +0100	[thread overview]
Message-ID: <aec7p15jvsw7XRHz@lucifer> (raw)
In-Reply-To: <20260421085056.26033-1-ye.liu@linux.dev>

NAK, expected allocation failures (even if practically impossible) should not
cause arbitrary kernel warnings.

But also this is very silly, you would need INT_MAX references on the anon_name
to happen first...

On Tue, Apr 21, 2026 at 04:50:55PM +0800, Ye Liu wrote:
> From: Ye Liu <liuye@kylinos.cn>
>
> The anon_vma_name_reuse() function may return NULL if memory allocation
> fails in anon_vma_name_alloc(). Currently, callers dup_anon_vma_name()
> and replace_anon_vma_name() do not check the return value, which could
> lead to NULL pointer dereferences.

We assign NULL if the allocation failed. And every code path understands
vma->anon_vma_name being NULL to be a valid situation of that VMA not having a
name.

In the case you're failing an allocation that small, the system is under extreme
memory pressure.

Not propagating an anon_vma_name, which is cosmetic, is totally fine under those
circumstances.

But also, you'd require the anon_vma_name to be saturated at REFCOUNT_MAX ==
INT_MAX.

So this is just silly.

>
> This patch adds proper error handling:
> - In dup_anon_vma_name(), if anon_vma_name_reuse() returns NULL, emit a
>   warning via WARN_ON_ONCE(1) since this is an unexpected condition.

It's not? Your whole thesis is that allocation failures can happen here and
cause a problem, so you can't simultaneously say it's 'unexpected'?

> - In replace_anon_vma_name(), return -ENOMEM to propagate the allocation
>   failure to the caller.
>
> These changes improve robustness against memory allocation failures.

No, they add a bunch of noise, then make an allocation failure into an
arbitrary, new kernel warning.

>
> Signed-off-by: Ye Liu <liuye@kylinos.cn>
> ---
>  include/linux/mm_inline.h | 12 +++++++++---
>  mm/madvise.c              |  7 ++++++-
>  2 files changed, 15 insertions(+), 4 deletions(-)
>
> diff --git a/include/linux/mm_inline.h b/include/linux/mm_inline.h
> index a171070e15f0..9bbaf8287806 100644
> --- a/include/linux/mm_inline.h
> +++ b/include/linux/mm_inline.h
> @@ -421,9 +421,15 @@ static inline void dup_anon_vma_name(struct vm_area_struct *orig_vma,
>  				     struct vm_area_struct *new_vma)
>  {
>  	struct anon_vma_name *anon_name = anon_vma_name(orig_vma);
> -
> -	if (anon_name)
> -		new_vma->anon_name = anon_vma_name_reuse(anon_name);
> +	struct anon_vma_name *new_name;
> +
> +	if (anon_name) {
> +		new_name = anon_vma_name_reuse(anon_name);
> +		if (new_name)
> +			new_vma->anon_name = new_name;
> +		else
> +			WARN_ON_ONCE(1);
> +	}

This is horrible code, but as I said above, this is not only wrong it's actively
bad - you're causing an allocation failure to result in a kernel warning.

We don't mind anon_vma_name not being propagated after billions of references
and under maximally extreme memory pressure/fatal signal propagation.

>  }
>
>  static inline void free_anon_vma_name(struct vm_area_struct *vma)
> diff --git a/mm/madvise.c b/mm/madvise.c
> index 69708e953cf5..ccb937a37e70 100644
> --- a/mm/madvise.c
> +++ b/mm/madvise.c
> @@ -118,6 +118,7 @@ static int replace_anon_vma_name(struct vm_area_struct *vma,
>  				 struct anon_vma_name *anon_name)
>  {
>  	struct anon_vma_name *orig_name = anon_vma_name(vma);
> +	struct anon_vma_name *new_name;
>
>  	if (!anon_name) {
>  		vma->anon_name = NULL;
> @@ -128,7 +129,11 @@ static int replace_anon_vma_name(struct vm_area_struct *vma,
>  	if (anon_vma_name_eq(orig_name, anon_name))
>  		return 0;
>
> -	vma->anon_name = anon_vma_name_reuse(anon_name);
> +	new_name = anon_vma_name_reuse(anon_name);
> +	if (!new_name)
> +		return -ENOMEM;
> +
> +	vma->anon_name = new_name;

This is pointless noise. Billions of references, extreme memory pressure
(practically impossible anyway).

>  	anon_vma_name_put(orig_name);
>
>  	return 0;
> --
> 2.43.0
>

Thanks, Lorenzo


  parent reply	other threads:[~2026-04-21  9:08 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-21  8:50 [PATCH] mm: handle potential NULL return from anon_vma_name_reuse() Ye Liu
2026-04-21  8:55 ` David Hildenbrand (Arm)
2026-04-21  9:10   ` Lorenzo Stoakes
2026-04-21  9:08 ` Lorenzo Stoakes [this message]
2026-04-21  9:25   ` Ye Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aec7p15jvsw7XRHz@lucifer \
    --to=ljs@kernel.org \
    --cc=Liam.Howlett@oracle.com \
    --cc=akpm@linux-foundation.org \
    --cc=axelrasmussen@google.com \
    --cc=baohua@kernel.org \
    --cc=david@kernel.org \
    --cc=jannh@google.com \
    --cc=kasong@tencent.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=liuye@kylinos.cn \
    --cc=mhocko@suse.com \
    --cc=qi.zheng@linux.dev \
    --cc=rppt@kernel.org \
    --cc=shakeel.butt@linux.dev \
    --cc=surenb@google.com \
    --cc=vbabka@kernel.org \
    --cc=weixugc@google.com \
    --cc=ye.liu@linux.dev \
    --cc=yuanchu@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.