All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Christian Marangi <ansuelsmth@gmail.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Nathan Chancellor <nathan@kernel.org>,
	Nick Desaulniers <nick.desaulniers+lkml@gmail.com>,
	Bill Wendling <morbo@google.com>,
	Justin Stitt <justinstitt@google.com>,
	Daniel Golle <daniel@makrotopia.org>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, llvm@lists.linux.dev
Subject: Re: [net-next RFC PATCH v5 10/10] net: airoha: add phylink support for GDM2/3/4
Date: Tue, 5 May 2026 23:56:32 +0200	[thread overview]
Message-ID: <afpnkL3Wr29DCTXh@lore-desk> (raw)
In-Reply-To: <20260505182713.27644-11-ansuelsmth@gmail.com>

[-- Attachment #1: Type: text/plain, Size: 9168 bytes --]

> Add phylink support for GDM2/3/4 port that require configuration of the
> PCS to make the external PHY or attached SFP cage work.
> 
> These needs to be defined in the GDM port node using the pcs-handle
> property.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

Hi Christian,

just a couple of nits inline.

Regards,
Lorenzo

> ---
>  drivers/net/ethernet/airoha/Kconfig       |   1 +
>  drivers/net/ethernet/airoha/airoha_eth.c  | 144 +++++++++++++++++++++-
>  drivers/net/ethernet/airoha/airoha_eth.h  |   3 +
>  drivers/net/ethernet/airoha/airoha_regs.h |  12 ++
>  4 files changed, 159 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/airoha/Kconfig b/drivers/net/ethernet/airoha/Kconfig
> index ad3ce501e7a5..38dcc76e5998 100644
> --- a/drivers/net/ethernet/airoha/Kconfig
> +++ b/drivers/net/ethernet/airoha/Kconfig
> @@ -20,6 +20,7 @@ config NET_AIROHA
>  	depends on NET_DSA || !NET_DSA
>  	select NET_AIROHA_NPU
>  	select PAGE_POOL
> +	select PHYLINK
>  	help
>  	  This driver supports the gigabit ethernet MACs in the
>  	  Airoha SoC family.
> diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c
> index 2bd79da70934..ad0328a25422 100644
> --- a/drivers/net/ethernet/airoha/airoha_eth.c
> +++ b/drivers/net/ethernet/airoha/airoha_eth.c
> @@ -8,6 +8,7 @@
>  #include <linux/of_reserved_mem.h>
>  #include <linux/platform_device.h>
>  #include <linux/tcp.h>
> +#include <linux/pcs/pcs.h>
>  #include <linux/u64_stats_sync.h>
>  #include <net/dst_metadata.h>
>  #include <net/page_pool/helpers.h>
> @@ -71,6 +72,11 @@ static void airoha_qdma_irq_disable(struct airoha_irq_bank *irq_bank,
>  	airoha_qdma_set_irqmask(irq_bank, index, mask, 0);
>  }
>  
> +static bool airhoa_is_phy_external(struct airoha_gdm_port *port)
> +{
> +	return port->id != 1;

I guess you can use AIROHA_GDM1_IDX here.

> +}
> +
>  static void airoha_set_macaddr(struct airoha_gdm_port *port, const u8 *addr)
>  {
>  	struct airoha_eth *eth = port->qdma->eth;
> @@ -1644,6 +1650,17 @@ static int airoha_dev_open(struct net_device *dev)
>  	struct airoha_qdma *qdma = port->qdma;
>  	u32 pse_port = FE_PSE_PORT_PPE1;
>  
> +	if (airhoa_is_phy_external(port)) {
> +		err = phylink_of_phy_connect(port->phylink, dev->dev.of_node, 0);
> +		if (err) {
> +			netdev_err(dev, "%s: could not attach PHY: %d\n", __func__,
> +				   err);
> +			return err;
> +		}
> +
> +		phylink_start(port->phylink);
> +	}
> +
>  	netif_tx_start_all_queues(dev);
>  	err = airoha_set_vip_for_gdm_port(port, true);
>  	if (err)
> @@ -1707,6 +1724,11 @@ static int airoha_dev_stop(struct net_device *dev)
>  		}
>  	}
>  
> +	if (airhoa_is_phy_external(port)) {
> +		phylink_stop(port->phylink);
> +		phylink_disconnect_phy(port->phylink);
> +	}
> +
>  	return 0;
>  }
>  
> @@ -2883,6 +2905,115 @@ bool airoha_is_valid_gdm_port(struct airoha_eth *eth,
>  	return false;
>  }
>  
> +static void airoha_mac_link_up(struct phylink_config *config, struct phy_device *phy,
> +			       unsigned int mode, phy_interface_t interface,
> +			       int speed, int duplex, bool tx_pause, bool rx_pause)
> +{
> +	struct airoha_gdm_port *port = container_of(config, struct airoha_gdm_port,
> +						    phylink_config);
> +	struct airoha_qdma *qdma = port->qdma;
> +	struct airoha_eth *eth = qdma->eth;

since you do not need qdma pointer here, you can just do port->eth here.

> +	u32 frag_size_tx, frag_size_rx;
> +
> +	if (port->id != 4)

same here, AIROHA_GDM4_IDX

> +		return;
> +
> +	switch (speed) {
> +	case SPEED_10000:
> +	case SPEED_5000:
> +		frag_size_tx = 8;
> +		frag_size_rx = 8;
> +		break;
> +	case SPEED_2500:
> +		frag_size_tx = 2;
> +		frag_size_rx = 1;
> +		break;
> +	default:
> +		frag_size_tx = 1;
> +		frag_size_rx = 0;
> +	}
> +
> +	/* Configure TX/RX frag based on speed */
> +	airoha_fe_rmw(eth, REG_GDMA4_TMBI_FRAG,
> +		      GDMA4_SGMII0_TX_FRAG_SIZE_MASK,
> +		      FIELD_PREP(GDMA4_SGMII0_TX_FRAG_SIZE_MASK,
> +				 frag_size_tx));
> +
> +	airoha_fe_rmw(eth, REG_GDMA4_RMBI_FRAG,
> +		      GDMA4_SGMII0_RX_FRAG_SIZE_MASK,
> +		      FIELD_PREP(GDMA4_SGMII0_RX_FRAG_SIZE_MASK,
> +				 frag_size_rx));
> +}
> +
> +static const struct phylink_mac_ops airoha_phylink_ops = {
> +	.mac_link_up = airoha_mac_link_up,
> +};
> +
> +static int airoha_setup_phylink(struct net_device *dev)
> +{
> +	struct airoha_gdm_port *port = netdev_priv(dev);
> +	struct device_node *np = dev->dev.of_node;
> +	struct phylink_pcs **available_pcs;
> +	phy_interface_t phy_mode;
> +	struct phylink *phylink;
> +	unsigned int num_pcs;
> +	int err;
> +
> +	err = of_get_phy_mode(np, &phy_mode);
> +	if (err) {
> +		dev_err(&dev->dev, "incorrect phy-mode\n");
> +		return err;
> +	}
> +
> +	port->phylink_config.dev = &dev->dev;
> +	port->phylink_config.type = PHYLINK_NETDEV;
> +	port->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
> +						MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD |
> +						MAC_5000FD | MAC_10000FD;
> +
> +	err = fwnode_phylink_pcs_parse(dev_fwnode(&dev->dev), NULL, &num_pcs);
> +	if (err)
> +		return err;
> +
> +	available_pcs = kcalloc(num_pcs, sizeof(*available_pcs), GFP_KERNEL);
> +	if (!available_pcs)
> +		return -ENOMEM;
> +
> +	err = fwnode_phylink_pcs_parse(dev_fwnode(&dev->dev), available_pcs,
> +				       &num_pcs);
> +	if (err)
> +		goto out;
> +
> +	port->phylink_config.available_pcs = available_pcs;
> +	port->phylink_config.num_available_pcs = num_pcs;
> +
> +	__set_bit(PHY_INTERFACE_MODE_SGMII,
> +		  port->phylink_config.supported_interfaces);
> +	__set_bit(PHY_INTERFACE_MODE_1000BASEX,
> +		  port->phylink_config.supported_interfaces);
> +	__set_bit(PHY_INTERFACE_MODE_2500BASEX,
> +		  port->phylink_config.supported_interfaces);
> +	__set_bit(PHY_INTERFACE_MODE_USXGMII,
> +		  port->phylink_config.supported_interfaces);
> +
> +	phy_interface_copy(port->phylink_config.pcs_interfaces,
> +			   port->phylink_config.supported_interfaces);
> +
> +	phylink = phylink_create(&port->phylink_config,
> +				 of_fwnode_handle(np),
> +				 phy_mode, &airoha_phylink_ops);
> +	if (IS_ERR(phylink)) {
> +		err = PTR_ERR(phylink);
> +		goto out;
> +	}
> +
> +	port->phylink = phylink;
> +out:
> +	kfree(available_pcs);
> +
> +	return err;
> +}
> +
>  static int airoha_alloc_gdm_port(struct airoha_eth *eth,
>  				 struct device_node *np)
>  {
> @@ -2954,6 +3085,12 @@ static int airoha_alloc_gdm_port(struct airoha_eth *eth,
>  	port->id = id;
>  	eth->ports[p] = port;
>  
> +	if (airhoa_is_phy_external(port)) {
> +		err = airoha_setup_phylink(dev);

should it be in airoha_register_gdm_devices()?

> +		if (err)
> +			return err;
> +	}
> +
>  	return airoha_metadata_dst_alloc(port);
>  }
>  
> @@ -3081,8 +3218,11 @@ static int airoha_probe(struct platform_device *pdev)
>  		if (!port)
>  			continue;
>  
> -		if (port->dev->reg_state == NETREG_REGISTERED)
> +		if (port->dev->reg_state == NETREG_REGISTERED) {
> +			if (airhoa_is_phy_external(port))
> +				phylink_destroy(port->phylink);
>  			unregister_netdev(port->dev);
> +		}
>  		airoha_metadata_dst_free(port);
>  	}
>  	airoha_hw_cleanup(eth);
> @@ -3107,6 +3247,8 @@ static void airoha_remove(struct platform_device *pdev)
>  		if (!port)
>  			continue;
>  
> +		if (airhoa_is_phy_external(port))
> +			phylink_destroy(port->phylink);
>  		unregister_netdev(port->dev);
>  		airoha_metadata_dst_free(port);
>  	}
> diff --git a/drivers/net/ethernet/airoha/airoha_eth.h b/drivers/net/ethernet/airoha/airoha_eth.h
> index af29fc74165b..e5c70f1fa4f1 100644
> --- a/drivers/net/ethernet/airoha/airoha_eth.h
> +++ b/drivers/net/ethernet/airoha/airoha_eth.h
> @@ -538,6 +538,9 @@ struct airoha_gdm_port {
>  	struct net_device *dev;
>  	int id;
>  
> +	struct phylink *phylink;
> +	struct phylink_config phylink_config;
> +
>  	struct airoha_hw_stats stats;
>  
>  	DECLARE_BITMAP(qos_sq_bmap, AIROHA_NUM_QOS_CHANNELS);
> diff --git a/drivers/net/ethernet/airoha/airoha_regs.h b/drivers/net/ethernet/airoha/airoha_regs.h
> index 436f3c8779c1..27f2583e143a 100644
> --- a/drivers/net/ethernet/airoha/airoha_regs.h
> +++ b/drivers/net/ethernet/airoha/airoha_regs.h
> @@ -358,6 +358,18 @@
>  #define IP_FRAGMENT_PORT_MASK		GENMASK(8, 5)
>  #define IP_FRAGMENT_NBQ_MASK		GENMASK(4, 0)
>  
> +#define REG_GDMA4_TMBI_FRAG		0x2028
> +#define GDMA4_SGMII1_TX_WEIGHT_MASK	GENMASK(31, 26)
> +#define GDMA4_SGMII1_TX_FRAG_SIZE_MASK	GENMASK(25, 16)
> +#define GDMA4_SGMII0_TX_WEIGHT_MASK	GENMASK(15, 10)
> +#define GDMA4_SGMII0_TX_FRAG_SIZE_MASK	GENMASK(9, 0)
> +
> +#define REG_GDMA4_RMBI_FRAG		0x202c
> +#define GDMA4_SGMII1_RX_WEIGHT_MASK	GENMASK(31, 26)
> +#define GDMA4_SGMII1_RX_FRAG_SIZE_MASK	GENMASK(25, 16)
> +#define GDMA4_SGMII0_RX_WEIGHT_MASK	GENMASK(15, 10)
> +#define GDMA4_SGMII0_RX_FRAG_SIZE_MASK	GENMASK(9, 0)
> +
>  #define REG_MC_VLAN_EN			0x2100
>  #define MC_VLAN_EN_MASK			BIT(0)
>  
> -- 
> 2.53.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

      reply	other threads:[~2026-05-05 21:56 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-05 18:27 [net-next RFC PATCH v5 00/10] net: pcs: Introduce support for fwnode PCS Christian Marangi
2026-05-05 18:27 ` [net-next RFC PATCH v5 01/10] net: phylink: keep and use MAC supported_interfaces in phylink struct Christian Marangi
2026-05-05 18:27 ` [net-next RFC PATCH v5 02/10] net: phylink: introduce internal phylink PCS handling Christian Marangi
2026-05-05 18:27 ` [net-next RFC PATCH v5 03/10] net: phylink: add phylink_release_pcs() to externally release a PCS Christian Marangi
2026-05-05 18:27 ` [net-next RFC PATCH v5 04/10] net: pcs: implement Firmware node support for PCS driver Christian Marangi
2026-05-05 18:27 ` [net-next RFC PATCH v5 05/10] net: phylink: support late PCS provider attach Christian Marangi
2026-05-05 18:27 ` [net-next RFC PATCH v5 06/10] dt-bindings: net: ethernet-controller: permit to define multiple PCS Christian Marangi
2026-05-05 18:27 ` [net-next RFC PATCH v5 07/10] net: phylink: add .pcs_link_down PCS OP Christian Marangi
2026-05-05 18:27 ` [net-next RFC PATCH v5 08/10] dt-bindings: net: pcs: Document support for Airoha Ethernet PCS Christian Marangi
2026-05-06  0:00   ` Benjamin Larsson
2026-05-05 18:27 ` [net-next RFC PATCH v5 09/10] net: pcs: airoha: add PCS driver for Airoha SoC Christian Marangi
2026-05-05 18:27 ` [net-next RFC PATCH v5 10/10] net: airoha: add phylink support for GDM2/3/4 Christian Marangi
2026-05-05 21:56   ` Lorenzo Bianconi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=afpnkL3Wr29DCTXh@lore-desk \
    --to=lorenzo@kernel.org \
    --cc=andrew+netdev@lunn.ch \
    --cc=ansuelsmth@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel@makrotopia.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=justinstitt@google.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=llvm@lists.linux.dev \
    --cc=morbo@google.com \
    --cc=nathan@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nick.desaulniers+lkml@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.