All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dan Carpenter <error27@gmail.com>
To: Pankaj Gupta <pankaj.gupta@nxp.com>
Cc: imx@lists.linux.dev
Subject: [bug report] firmware: drivers: imx: adds miscdev
Date: Thu, 7 May 2026 09:59:56 +0300	[thread overview]
Message-ID: <afw4bE8pzcHA1Mzd@stanley.mountain> (raw)

Hello Pankaj Gupta,

Commit 4de71839142b ("firmware: drivers: imx: adds miscdev") from Jan
22, 2026 (linux-next), leads to the following Smatch static checker
warning:

	drivers/firmware/imx/se_ctrl.c:681 se_ioctl_setup_iobuf_handler()
	warn: integer overflow "io.length + 7"

drivers/firmware/imx/se_ctrl.c
    644 static int se_ioctl_setup_iobuf_handler(struct se_if_device_ctx *dev_ctx,
    645                                         void __user *uarg)
    646 {
    647         struct se_shared_mem *shared_mem = NULL;
    648         struct se_ioctl_setup_iobuf io = {0};
    649         int err = 0;
    650         u32 pos;
    651 
    652         if (copy_from_user(&io, uarg, sizeof(io))) {
    653                 dev_err(dev_ctx->priv->dev, "%s: Failed copy iobuf config from user.",
    654                         dev_ctx->devname);
    655                 return -EFAULT;
    656         }
    657 
    658         dev_dbg(dev_ctx->priv->dev, "%s: io [buf: %p(%d) flag: %x].", dev_ctx->devname,
    659                 io.user_buf, io.length, io.flags);
    660 
    661         if (io.length == 0 || !io.user_buf) {
    662                 /*
    663                  * Accept NULL pointers since some buffers are optional
    664                  * in FW commands. In this case we should return 0 as
    665                  * pointer to be embedded into the message.
    666                  * Skip all data copy part of code below.
    667                  */
    668                 io.ele_addr = 0;
    669                 goto copy;
    670         }
    671 
    672         /* No specific requirement for this buffer. */
    673         shared_mem = &dev_ctx->se_shared_mem_mgmt.non_secure_mem;
    674 
    675         /* Check there is enough space in the shared memory. */
    676         dev_dbg(dev_ctx->priv->dev, "%s: req_size = %d, max_size= %d, curr_pos = %d",
    677                 dev_ctx->devname, round_up(io.length, 8u), shared_mem->size,
    678                 shared_mem->pos);
    679 
    680         if (shared_mem->size < shared_mem->pos ||
--> 681             round_up(io.length, 8u) > (shared_mem->size - shared_mem->pos)) {

If io.length is >= U32_MAX - 7 then round_up() is zero.

    682                 dev_err(dev_ctx->priv->dev, "%s: Not enough space in shared memory.",
    683                         dev_ctx->devname);
    684                 return -ENOMEM;
    685         }
    686 
    687         /* Allocate space in shared memory. 8 bytes aligned. */
    688         pos = shared_mem->pos;
    689         shared_mem->pos += round_up(io.length, 8u);
    690         io.ele_addr = (u64)shared_mem->dma_addr + pos;
    691 
    692         memset(shared_mem->ptr + pos, 0, io.length);
                ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
And this memset() will crash.

    693         if ((io.flags & SE_IO_BUF_FLAGS_IS_INPUT) ||
    694             (io.flags & SE_IO_BUF_FLAGS_IS_IN_OUT)) {
    695                 /*
    696                  * buffer is input:
    697                  * copy data from user space to this allocated buffer.
    698                  */
    699                 if (copy_from_user(shared_mem->ptr + pos, io.user_buf, io.length)) {
    700                         dev_err(dev_ctx->priv->dev,
    701                                 "%s: Failed copy data to shared memory.",
    702                                 dev_ctx->devname);
    703                         return -EFAULT;
    704                 }
    705         }
    706 
    707         err = add_b_desc_to_pending_list(shared_mem->ptr + pos, &io, dev_ctx);
    708         if (err < 0)
    709                 dev_err(dev_ctx->priv->dev, "%s: Failed to allocate/link b_desc.",
    710                         dev_ctx->devname);
    711 
    712 copy:
    713         /* Provide the EdgeLock Enclave address to user space only if success.*/
    714         if (copy_to_user(uarg, &io, sizeof(io))) {
    715                 dev_err(dev_ctx->priv->dev, "%s: Failed to copy iobuff setup to user.",
    716                         dev_ctx->devname);
    717                 err = -EFAULT;
    718         }
    719 
    720         return err;
    721 }

This email is a free service from the Smatch-CI project [smatch.sf.net].

regards,
dan carpenter

             reply	other threads:[~2026-05-07  7:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-07  6:59 Dan Carpenter [this message]
  -- strict thread matches above, loose matches on Subject: below --
2026-05-07  7:07 [bug report] firmware: drivers: imx: adds miscdev Dan Carpenter
2026-05-07  6:35 Dan Carpenter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=afw4bE8pzcHA1Mzd@stanley.mountain \
    --to=error27@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=pankaj.gupta@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.