All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
To: Kieran Bingham <kieran.bingham@ideasonboard.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>,
	 Steve Longerbeam <slongerbeam@gmail.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	 linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 06/11] media: i2c: ov5640: split out the LSC registers
Date: Thu, 14 May 2026 10:23:50 +0200	[thread overview]
Message-ID: <agWGc0cN8XhFNF2T@zed> (raw)
In-Reply-To: <20260501-ov5640_cleanup-v1-6-0869a7802a33@ideasonboard.com>

Hi Kieran

On Fri, May 01, 2026 at 04:39:08PM +0100, Kieran Bingham wrote:
> Lens shading is a characteristic which is specific to the lens of a
> given module.
>
> Separate the Lens Shading Calibration registers from the init_setting
> to identify the registers which must be updated when changing a lens.
>
> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
>
> ---
>
> The ordering of the table entries here are maintained and not resorted
> (i.e. that first line) to make it easy to confirm that no adjustment is
> made to the data here.
>
> I've also moved the LSC 'above' the init table as otherwise the diff
> becomes unreviewable - as it shows a different hunk being conceptually
> moved instead and hides the ability to see what is moving.
>
> Though that itself also confirms that the values don't change here, so
> I'm happy to move it down if requested.
> ---
>  drivers/media/i2c/ov5640.c | 51 +++++++++++++++++++++++++++-------------------
>  1 file changed, 30 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> index e1e253730206..b4e1ec4364df 100644
> --- a/drivers/media/i2c/ov5640.c
> +++ b/drivers/media/i2c/ov5640.c
> @@ -522,6 +522,31 @@ static const struct v4l2_mbus_framefmt ov5640_dvp_default_fmt = {
>  	.field = V4L2_FIELD_NONE,
>  };
>
> +static const struct reg_value ov5640_lsc[] = {
> +	/* Lens Shading Correction */
> +	{0x5800, 0x23, 0, 0}, {0x5801, 0x14, 0, 0},
> +	{0x5802, 0x0f, 0, 0}, {0x5803, 0x0f, 0, 0}, {0x5804, 0x12, 0, 0},
> +	{0x5805, 0x26, 0, 0}, {0x5806, 0x0c, 0, 0}, {0x5807, 0x08, 0, 0},
> +	{0x5808, 0x05, 0, 0}, {0x5809, 0x05, 0, 0}, {0x580a, 0x08, 0, 0},
> +	{0x580b, 0x0d, 0, 0}, {0x580c, 0x08, 0, 0}, {0x580d, 0x03, 0, 0},
> +	{0x580e, 0x00, 0, 0}, {0x580f, 0x00, 0, 0}, {0x5810, 0x03, 0, 0},
> +	{0x5811, 0x09, 0, 0}, {0x5812, 0x07, 0, 0}, {0x5813, 0x03, 0, 0},
> +	{0x5814, 0x00, 0, 0}, {0x5815, 0x01, 0, 0}, {0x5816, 0x03, 0, 0},
> +	{0x5817, 0x08, 0, 0}, {0x5818, 0x0d, 0, 0}, {0x5819, 0x08, 0, 0},
> +	{0x581a, 0x05, 0, 0}, {0x581b, 0x06, 0, 0}, {0x581c, 0x08, 0, 0},
> +	{0x581d, 0x0e, 0, 0}, {0x581e, 0x29, 0, 0}, {0x581f, 0x17, 0, 0},
> +	{0x5820, 0x11, 0, 0}, {0x5821, 0x11, 0, 0}, {0x5822, 0x15, 0, 0},
> +	{0x5823, 0x28, 0, 0}, {0x5824, 0x46, 0, 0}, {0x5825, 0x26, 0, 0},
> +	{0x5826, 0x08, 0, 0}, {0x5827, 0x26, 0, 0}, {0x5828, 0x64, 0, 0},
> +	{0x5829, 0x26, 0, 0}, {0x582a, 0x24, 0, 0}, {0x582b, 0x22, 0, 0},
> +	{0x582c, 0x24, 0, 0}, {0x582d, 0x24, 0, 0}, {0x582e, 0x06, 0, 0},
> +	{0x582f, 0x22, 0, 0}, {0x5830, 0x40, 0, 0}, {0x5831, 0x42, 0, 0},
> +	{0x5832, 0x24, 0, 0}, {0x5833, 0x26, 0, 0}, {0x5834, 0x24, 0, 0},
> +	{0x5835, 0x22, 0, 0}, {0x5836, 0x22, 0, 0}, {0x5837, 0x26, 0, 0},
> +	{0x5838, 0x44, 0, 0}, {0x5839, 0x24, 0, 0}, {0x583a, 0x26, 0, 0},
> +	{0x583b, 0x28, 0, 0}, {0x583c, 0x42, 0, 0}, {0x583d, 0xce, 0, 0},
> +};
> +
>  static const struct reg_value ov5640_init_setting[] = {
>  	{0x3103, 0x11, 0, 0},
>  	{0x3103, 0x03, 0, 0}, {0x3630, 0x36, 0, 0},
> @@ -574,27 +599,8 @@ static const struct reg_value ov5640_init_setting[] = {
>  	{0x548d, 0xcd, 0, 0}, {0x548e, 0xdd, 0, 0}, {0x548f, 0xea, 0, 0},
>  	{0x5490, 0x1d, 0, 0}, {0x5580, 0x02, 0, 0}, {0x5583, 0x40, 0, 0},
>  	{0x5584, 0x10, 0, 0}, {0x5589, 0x10, 0, 0}, {0x558a, 0x00, 0, 0},
> -	{0x558b, 0xf8, 0, 0}, {0x5800, 0x23, 0, 0}, {0x5801, 0x14, 0, 0},
> -	{0x5802, 0x0f, 0, 0}, {0x5803, 0x0f, 0, 0}, {0x5804, 0x12, 0, 0},
> -	{0x5805, 0x26, 0, 0}, {0x5806, 0x0c, 0, 0}, {0x5807, 0x08, 0, 0},
> -	{0x5808, 0x05, 0, 0}, {0x5809, 0x05, 0, 0}, {0x580a, 0x08, 0, 0},
> -	{0x580b, 0x0d, 0, 0}, {0x580c, 0x08, 0, 0}, {0x580d, 0x03, 0, 0},
> -	{0x580e, 0x00, 0, 0}, {0x580f, 0x00, 0, 0}, {0x5810, 0x03, 0, 0},
> -	{0x5811, 0x09, 0, 0}, {0x5812, 0x07, 0, 0}, {0x5813, 0x03, 0, 0},
> -	{0x5814, 0x00, 0, 0}, {0x5815, 0x01, 0, 0}, {0x5816, 0x03, 0, 0},
> -	{0x5817, 0x08, 0, 0}, {0x5818, 0x0d, 0, 0}, {0x5819, 0x08, 0, 0},
> -	{0x581a, 0x05, 0, 0}, {0x581b, 0x06, 0, 0}, {0x581c, 0x08, 0, 0},
> -	{0x581d, 0x0e, 0, 0}, {0x581e, 0x29, 0, 0}, {0x581f, 0x17, 0, 0},
> -	{0x5820, 0x11, 0, 0}, {0x5821, 0x11, 0, 0}, {0x5822, 0x15, 0, 0},
> -	{0x5823, 0x28, 0, 0}, {0x5824, 0x46, 0, 0}, {0x5825, 0x26, 0, 0},
> -	{0x5826, 0x08, 0, 0}, {0x5827, 0x26, 0, 0}, {0x5828, 0x64, 0, 0},
> -	{0x5829, 0x26, 0, 0}, {0x582a, 0x24, 0, 0}, {0x582b, 0x22, 0, 0},
> -	{0x582c, 0x24, 0, 0}, {0x582d, 0x24, 0, 0}, {0x582e, 0x06, 0, 0},
> -	{0x582f, 0x22, 0, 0}, {0x5830, 0x40, 0, 0}, {0x5831, 0x42, 0, 0},
> -	{0x5832, 0x24, 0, 0}, {0x5833, 0x26, 0, 0}, {0x5834, 0x24, 0, 0},
> -	{0x5835, 0x22, 0, 0}, {0x5836, 0x22, 0, 0}, {0x5837, 0x26, 0, 0},
> -	{0x5838, 0x44, 0, 0}, {0x5839, 0x24, 0, 0}, {0x583a, 0x26, 0, 0},
> -	{0x583b, 0x28, 0, 0}, {0x583c, 0x42, 0, 0}, {0x583d, 0xce, 0, 0},
> +	{0x558b, 0xf8, 0, 0},
> +

I'm wondering if the empty line here is intentional.
Regardless:
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>

>  	{0x5025, 0x00, 0, 0}, {0x3a0f, 0x30, 0, 0}, {0x3a10, 0x28, 0, 0},
>  	{0x3a1b, 0x30, 0, 0}, {0x3a1e, 0x26, 0, 0}, {0x3a11, 0x60, 0, 0},
>  	{0x3a1f, 0x14, 0, 0}, {0x3008, 0x02, 0, 0}, {0x3c00, 0x04, 0, 300},
> @@ -2396,6 +2402,9 @@ static int ov5640_restore_mode(struct ov5640_dev *sensor)
>  	ov5640_load_regs(sensor, ov5640_init_setting,
>  			 ARRAY_SIZE(ov5640_init_setting));
>
> +	/* Load the Lens Shading Correction Table */
> +	ov5640_load_regs(sensor, ov5640_lsc, ARRAY_SIZE(ov5640_lsc));
> +
>  	ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x3f,
>  			     (ilog2(OV5640_SCLK2X_ROOT_DIV) << 2) |
>  			     ilog2(OV5640_SCLK_ROOT_DIV));
>
> --
> 2.52.0
>
>

  reply	other threads:[~2026-05-14  8:23 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-01 15:39 [PATCH 00/11] media: i2c: ov5640: Refactor ISP configuration Kieran Bingham
2026-05-01 15:39 ` [PATCH 01/11] media: i2c: ov5640: Set default WB gains Kieran Bingham
2026-05-14  7:44   ` Jacopo Mondi
2026-05-01 15:39 ` [PATCH 02/11] media: i2c: ov5640: Set exposure minimum and defaults Kieran Bingham
2026-05-14  7:58   ` Jacopo Mondi
2026-05-14  8:01     ` Jacopo Mondi
2026-05-01 15:39 ` [PATCH 03/11] media: i2c: ov5640: Fix minimum gain to 1.0x Kieran Bingham
2026-05-14  8:05   ` Jacopo Mondi
2026-05-01 15:39 ` [PATCH 04/11] media: i2c: ov5640: fix error path in ov5640_set_mode Kieran Bingham
2026-05-14  8:08   ` Jacopo Mondi
2026-05-01 15:39 ` [PATCH 05/11] media: i2c: ov5640: Remove unsupported bayer orders Kieran Bingham
2026-05-14  8:10   ` Jacopo Mondi
2026-05-14  8:43     ` Kieran Bingham
2026-05-14  9:22       ` Jacopo Mondi
2026-05-01 15:39 ` [PATCH 06/11] media: i2c: ov5640: split out the LSC registers Kieran Bingham
2026-05-14  8:23   ` Jacopo Mondi [this message]
2026-05-14  8:44     ` Kieran Bingham
2026-05-01 15:39 ` [PATCH 07/11] media: i2c: ov5640: Split out AWB registers Kieran Bingham
2026-05-01 15:39 ` [PATCH 08/11] media: i2c: ov5640: Document AWB control registers Kieran Bingham
2026-05-14  8:33   ` Jacopo Mondi
2026-05-14  8:34   ` Jacopo Mondi
2026-05-14  8:48     ` Kieran Bingham
2026-05-01 15:39 ` [PATCH 09/11] media: i2c: ov5640: Add ISP Control registers Kieran Bingham
2026-05-14  8:36   ` Jacopo Mondi
2026-05-01 15:39 ` [PATCH 10/11] media: i2c: ov5640: Disable ISP for raw output Kieran Bingham
2026-05-14  8:39   ` Jacopo Mondi
2026-05-14  8:50     ` Kieran Bingham
2026-05-01 15:39 ` [PATCH 11/11] media: i2c: ov5640: Split out format mux registers Kieran Bingham
2026-05-14  8:41   ` Jacopo Mondi
2026-05-14  8:51     ` Kieran Bingham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=agWGc0cN8XhFNF2T@zed \
    --to=jacopo.mondi@ideasonboard.com \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=slongerbeam@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.