From: Stefan.Hagendorn@lindy.cc
To: alsa-devel@lists.sourceforge.net
Subject: intel8x0 mic input even with gain and 100% vol. too quietly
Date: Sat, 13 Jul 2002 15:21:51 +0200 [thread overview]
Message-ID: <agp9no$ktl$2@main.gmane.org> (raw)
Hi all,
I try to play with my microphone attached to my intel810 soundsystem. But
even with 100% mic volume and +20db gain it is too silent. Is this a known
problem of the I810 Chipset ???
Too silent means, I have to blow directly into the mic to hear anything
... normal speak, even cry load doesn't realy help ...
Thanks in advance
Stefan
[root@voyager cvoicecontrol]# cat /proc/asound/cards
0 [card0 ]: ICH - Intel 82801BA-ICH2
Intel 82801BA-ICH2 at 0xe000, irq 10
[root@voyager cvoicecontrol]# cat /proc/asound/card0/ac97#0
0-0/0: Avance Logic ALC200/200P rev 0
Capabilities : -headphone out-
DAC resolution : 18-bit
ADC resolution : 18-bit
3D enhancement : Realtek 3D Stereo Enhancement
Current setup
Mic gain : +20dB [+20dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : on
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=1 AMAP DSA=0 SPDIF VRA
Extended status : SPCV SPDIF=3/4 VRA
PCM front DAC : 48000Hz
PCM ADC : 48000Hz
SPDIF Control : Consumer PCM Copyright Category=0x2 Generation=1
Rate=48kHz
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
reply other threads:[~2002-07-13 13:21 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='agp9no$ktl$2@main.gmane.org' \
--to=stefan.hagendorn@lindy.cc \
--cc=alsa-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.