From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
jouni.hogander@intel.com, animesh.manna@intel.com
Subject: Re: [PATCH 07/11] drm/i915/dp: Set relevant Downspread Ctrl DPCD bits for PR + Auxless ALPM
Date: Fri, 22 May 2026 18:08:46 +0300 [thread overview]
Message-ID: <ahBxfslq0xVmlGq_@intel.com> (raw)
In-Reply-To: <20260518035502.2909359-8-ankit.k.nautiyal@intel.com>
On Mon, May 18, 2026 at 09:24:57AM +0530, Ankit Nautiyal wrote:
> If a Panel Replay capable sink, supports Async Video timing in
> PR active state, then source does not necessarily need to send AS SDPs
> during PR active.
>
> However, if asynchronous video timing is not supported, then for PR with
> Aux-less ALPM, the source must transmit Adaptive-Sync SDPs for video
> timing synchronization while PR is active.
>
> If the source needs to send AS SDP during PR active, this requires setting
> DPCD 0x0107[6] (FIXED_VTOTAL_AS_SDP_EN_IN_PR_ACTIVE). This applies whether
> VRR is enabled (AVT/FAVT) or fixed-timing mode is used.
>
> This bit defines AS SDP timing behavior during PR Active, even if AS SDPs
> are briefly suspended.
>
> Program the relevant Downspread Ctrl DPCD bits accordingly.
>
> v2: Instead of Panel Replay check simply use AS SDP enable check. (Ville)
> v3: Since the bit is defined in context of Panel Replay and AS SDP, add
> a check for both. (Ville)
>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
> ---
> .../gpu/drm/i915/display/intel_dp_link_training.c | 15 +++++++++++++--
> .../gpu/drm/i915/display/intel_dp_link_training.h | 3 ++-
> drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +-
> 3 files changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> index a26094223f78..d0b033d2cfb4 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> @@ -34,8 +34,10 @@
> #include "intel_dp.h"
> #include "intel_dp_link_training.h"
> #include "intel_encoder.h"
> +#include "intel_hdmi.h"
> #include "intel_hotplug.h"
> #include "intel_panel.h"
> +#include "intel_psr.h"
>
> #define LT_MSG_PREFIX "[CONNECTOR:%d:%s][ENCODER:%d:%s][%s] "
> #define LT_MSG_ARGS(_intel_dp, _dp_phy) (_intel_dp)->attached_connector->base.base.id, \
> @@ -710,11 +712,14 @@ static bool intel_dp_link_max_vswing_reached(struct intel_dp *intel_dp,
> return true;
> }
>
> -void intel_dp_link_training_set_mode(struct intel_dp *intel_dp, int link_rate, bool is_vrr)
> +void intel_dp_link_training_set_mode(struct intel_dp *intel_dp, int link_rate,
> + bool is_vrr,
> + bool pr_with_as_sdp_enable)
> {
> u8 link_config[2];
>
> link_config[0] = is_vrr ? DP_MSA_TIMING_PAR_IGNORE_EN : 0;
> + link_config[0] |= pr_with_as_sdp_enable ? DP_FIXED_VTOTAL_AS_SDP_EN_IN_PR_ACTIVE : 0;
> link_config[1] = drm_dp_is_uhbr_rate(link_rate) ?
> DP_SET_ANSI_128B132B : DP_SET_ANSI_8B10B;
> drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2);
> @@ -723,6 +728,10 @@ void intel_dp_link_training_set_mode(struct intel_dp *intel_dp, int link_rate, b
> static void intel_dp_update_downspread_ctrl(struct intel_dp *intel_dp,
> const struct intel_crtc_state *crtc_state)
> {
> + bool pr_with_as_sdp_enable =
> + intel_psr_needs_alpm_aux_less(intel_dp, crtc_state) &&
> + crtc_state->infoframes.enable & intel_hdmi_infoframe_enable(DP_SDP_ADAPTIVE_SYNC);
This whole thing could be a function instead of a variable.
The use of intel_psr_needs_alpm_aux_less() is a bit confusing here,
but I guess it (at least currently) does the right thing.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> +
> /*
> * Currently, we set the MSA ignore bit based on vrr.in_range.
> * We can't really read that out during driver load since we don't have
> @@ -737,7 +746,9 @@ static void intel_dp_update_downspread_ctrl(struct intel_dp *intel_dp,
> * especially on the first real commit when clearing the inherited flag.
> */
> intel_dp_link_training_set_mode(intel_dp,
> - crtc_state->port_clock, crtc_state->vrr.in_range);
> + crtc_state->port_clock,
> + crtc_state->vrr.in_range,
> + pr_with_as_sdp_enable);
> }
>
> void intel_dp_link_training_set_bw(struct intel_dp *intel_dp,
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.h b/drivers/gpu/drm/i915/display/intel_dp_link_training.h
> index 33dcbde6a408..18c34c1a472f 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.h
> @@ -18,7 +18,8 @@ int intel_dp_init_lttpr_and_dprx_caps(struct intel_dp *intel_dp);
> bool intel_dp_lttpr_transparent_mode_enabled(struct intel_dp *intel_dp);
>
> void intel_dp_link_training_set_mode(struct intel_dp *intel_dp,
> - int link_rate, bool is_vrr);
> + int link_rate, bool is_vrr,
> + bool pr_with_as_sdp_enable);
> void intel_dp_link_training_set_bw(struct intel_dp *intel_dp,
> int link_bw, int rate_select, int lane_count,
> bool enhanced_framing, bool post_lt_adj_req);
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index 8f73e01db17c..a238f7948cec 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -2145,7 +2145,7 @@ void intel_dp_mst_prepare_probe(struct intel_dp *intel_dp)
>
> intel_dp_compute_rate(intel_dp, link_rate, &link_bw, &rate_select);
>
> - intel_dp_link_training_set_mode(intel_dp, link_rate, false);
> + intel_dp_link_training_set_mode(intel_dp, link_rate, false, false);
> intel_dp_link_training_set_bw(intel_dp, link_bw, rate_select, lane_count,
> drm_dp_enhanced_frame_cap(intel_dp->dpcd), false);
>
> --
> 2.45.2
--
Ville Syrjälä
Intel
next prev parent reply other threads:[~2026-05-22 15:08 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-18 3:54 [PATCH 00/11] Fix Adaptive-Sync SDP for PR with Link ON + Auxless-ALPM Ankit Nautiyal
2026-05-18 3:54 ` [PATCH 01/11] drm/i915/psr: Add helper to get Async Video timing support in PR active Ankit Nautiyal
2026-05-22 14:06 ` Ville Syrjälä
2026-05-18 3:54 ` [PATCH 02/11] drm/i915/dp: Add member to intel_dp to store AS SDP v2 support Ankit Nautiyal
2026-05-22 14:08 ` Ville Syrjälä
2026-05-18 3:54 ` [PATCH 03/11] drm/i915/dp: Allow AS SDP only if v2 is supported Ankit Nautiyal
2026-05-22 14:10 ` Ville Syrjälä
2026-05-18 3:54 ` [PATCH 04/11] drm/i915/psr: Write the PR config DPCDs in burst mode Ankit Nautiyal
2026-05-18 3:54 ` [PATCH 05/11] drm/i915/display: Add helper for AS SDP transmission time selection Ankit Nautiyal
2026-05-18 3:54 ` [PATCH 06/11] drm/i915/psr: Program Panel Replay CONFIG3 using AS SDP transmission time Ankit Nautiyal
2026-05-18 3:54 ` [PATCH 07/11] drm/i915/dp: Set relevant Downspread Ctrl DPCD bits for PR + Auxless ALPM Ankit Nautiyal
2026-05-22 15:08 ` Ville Syrjälä [this message]
2026-05-18 3:54 ` [PATCH 08/11] drm/i915/dp: Program AS SDP DB[1:0] for PR with Link off Ankit Nautiyal
2026-05-18 3:54 ` [PATCH 09/11] drm/i915/dp: Split AS SDP computation between compute_config and compute_config_late Ankit Nautiyal
2026-05-22 15:24 ` Ville Syrjälä
2026-05-23 4:27 ` Nautiyal, Ankit K
2026-05-18 3:55 ` [PATCH 10/11] drm/i915/dp: Compute and include coasting vtotal for AS SDP Ankit Nautiyal
2026-05-23 4:34 ` Nautiyal, Ankit K
2026-05-18 3:55 ` [PATCH 11/11] drm/i915/dp: Always enable AS SDP if supported by source + sink Ankit Nautiyal
2026-05-22 15:25 ` Ville Syrjälä
2026-05-23 4:29 ` Nautiyal, Ankit K
2026-05-18 4:16 ` ✓ CI.KUnit: success for Fix Adaptive-Sync SDP for PR with Link ON + Auxless-ALPM (rev2) Patchwork
2026-05-18 4:54 ` ✓ Xe.CI.BAT: " Patchwork
2026-05-18 5:44 ` ✓ i915.CI.BAT: " Patchwork
2026-05-18 6:47 ` ✗ Xe.CI.FULL: failure " Patchwork
-- strict thread matches above, loose matches on Subject: below --
2026-05-25 5:22 [PATCH 00/11] Fix Adaptive-Sync SDP for PR with Link ON + Auxless-ALPM Ankit Nautiyal
2026-05-25 5:22 ` [PATCH 07/11] drm/i915/dp: Set relevant Downspread Ctrl DPCD bits for PR + Auxless ALPM Ankit Nautiyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ahBxfslq0xVmlGq_@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=animesh.manna@intel.com \
--cc=ankit.k.nautiyal@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jouni.hogander@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.