All of lore.kernel.org
 help / color / mirror / Atom feed
From: Deborah Brouwer <deborah.brouwer@collabora.com>
To: Danilo Krummrich <dakr@kernel.org>
Cc: aliceryhl@google.com, daniel.almeida@collabora.com,
	boris.brezillon@collabora.com, gary@garyguo.net,
	dri-devel@lists.freedesktop.org, rust-for-linux@vger.kernel.org
Subject: Re: [PATCH 2/2] gpu: drm: tyr: use IoMem directly instead of Devres
Date: Wed, 27 May 2026 15:56:55 -0700	[thread overview]
Message-ID: <ahd2t_aHA5hk9xml@um790> (raw)
In-Reply-To: <20260525230152.277820-3-dakr@kernel.org>

On Tue, May 26, 2026 at 01:01:44AM +0200, Danilo Krummrich wrote:
> Now that IoMem is lifetime-parameterized, use it directly in probe
> rather than wrapping it in Devres and Arc. The I/O memory mapping is
> only used during probe and not stored in driver data, so device-managed
> revocation is unnecessary.
> 
> This removes the Devres access(dev) pattern from issue_soft_reset(),
> GpuInfo::new(), and l2_power_on(), simplifying register access.
> 
> Signed-off-by: Danilo Krummrich <dakr@kernel.org>
> ---
>  drivers/gpu/drm/tyr/driver.rs | 19 ++++++-------------
>  drivers/gpu/drm/tyr/gpu.rs    | 13 +++----------
>  2 files changed, 9 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/gpu/drm/tyr/driver.rs b/drivers/gpu/drm/tyr/driver.rs
> index 5f4c484f671f..b9a5cc5fc678 100644
> --- a/drivers/gpu/drm/tyr/driver.rs
> +++ b/drivers/gpu/drm/tyr/driver.rs
> @@ -6,11 +6,9 @@
>          OptionalClk, //
>      },
>      device::{
> -        Bound,
>          Core,
>          Device, //
>      },
> -    devres::Devres,
>      dma::{
>          Device as DmaDevice,
>          DmaMask, //
> @@ -30,7 +28,6 @@
>      sizes::SZ_2M,
>      sync::{
>          aref::ARef,
> -        Arc,
>          Mutex, //
>      },
>      time, //
> @@ -44,7 +41,7 @@
>      regs::gpu_control::*, //
>  };
>  
> -pub(crate) type IoMem = kernel::io::mem::IoMem<'static, SZ_2M>;
> +pub(crate) type IoMem<'a> = kernel::io::mem::IoMem<'a, SZ_2M>;
>  
>  pub(crate) struct TyrDrmDriver;
>  
> @@ -74,15 +71,11 @@ pub(crate) struct TyrDrmDeviceData {
>      pub(crate) gpu_info: GpuInfo,
>  }
>  
> -fn issue_soft_reset(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result {
> -    let io = (*iomem).access(dev)?;
> -    io.write_reg(GPU_COMMAND::reset(ResetMode::SoftReset));
> +fn issue_soft_reset(dev: &Device, iomem: &IoMem<'_>) -> Result {
> +    iomem.write_reg(GPU_COMMAND::reset(ResetMode::SoftReset));
>  
>      poll::read_poll_timeout(
> -        || {
> -            let io = (*iomem).access(dev)?;
> -            Ok(io.read(GPU_IRQ_RAWSTAT))
> -        },
> +        || Ok(iomem.read(GPU_IRQ_RAWSTAT)),
>          |status| status.reset_completed(),
>          time::Delta::from_millis(1),
>          time::Delta::from_millis(100),
> @@ -123,12 +116,12 @@ fn probe<'bound>(
>          let sram_regulator = Regulator::<regulator::Enabled>::get(pdev.as_ref(), c"sram")?;
>  
>          let request = pdev.io_request_by_index(0).ok_or(ENODEV)?;
> -        let iomem = Arc::new(request.iomap_sized::<SZ_2M>()?.into_devres()?, GFP_KERNEL)?;
> +        let iomem = request.iomap_sized::<SZ_2M>()?;
>  
>          issue_soft_reset(pdev.as_ref(), &iomem)?;
>          gpu::l2_power_on(pdev.as_ref(), &iomem)?;
>  
> -        let gpu_info = GpuInfo::new(pdev.as_ref(), &iomem)?;
> +        let gpu_info = GpuInfo::new(&iomem)?;
>          gpu_info.log(pdev.as_ref());
>  
>          let pa_bits = MMU_FEATURES::from_raw(gpu_info.mmu_features)
> diff --git a/drivers/gpu/drm/tyr/gpu.rs b/drivers/gpu/drm/tyr/gpu.rs
> index 652556026f50..3acffefaf210 100644
> --- a/drivers/gpu/drm/tyr/gpu.rs
> +++ b/drivers/gpu/drm/tyr/gpu.rs
> @@ -9,7 +9,6 @@
>          Bound,
>          Device, //
>      },
> -    devres::Devres,
>      io::{
>          poll,
>          register::Array,
> @@ -40,9 +39,7 @@
>  pub(crate) struct GpuInfo(pub(crate) uapi::drm_panthor_gpu_info);
>  
>  impl GpuInfo {
> -    pub(crate) fn new(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result<Self> {
> -        let io = (*iomem).access(dev)?;
> -
> +    pub(crate) fn new(io: &IoMem<'_>) -> Result<Self> {
>          Ok(Self(uapi::drm_panthor_gpu_info {
>              gpu_id: io.read(GPU_ID).into_raw(),
>              gpu_rev: io.read(REVIDR).into_raw(),
> @@ -163,15 +160,11 @@ struct GpuModels {
>  }];
>  
>  /// Powers on the l2 block.
> -pub(crate) fn l2_power_on(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result {
> -    let io = (*iomem).access(dev)?;
> +pub(crate) fn l2_power_on(dev: &Device, io: &IoMem<'_>) -> Result {
>      io.write_reg(L2_PWRON_LO::zeroed().with_const_request::<1>());
>  
>      poll::read_poll_timeout(
> -        || {
> -            let io = (*iomem).access(dev)?;
> -            Ok(io.read(L2_READY_LO))
> -        },
> +        || Ok(io.read(L2_READY_LO)),
>          |status| status.ready() == 1,
>          Delta::from_millis(1),
>          Delta::from_millis(100),
> -- 
> 2.54.0
> 

Tested-by: Deborah Brouwer <deborah.brouwer@collabora.com>


      parent reply	other threads:[~2026-05-27 22:57 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-25 23:01 [PATCH 0/2] drm: tyr: use lifetime-bound IoMem Danilo Krummrich
2026-05-25 23:01 ` [PATCH 1/2] gpu: drm: tyr: separate driver type from driver data Danilo Krummrich
2026-05-26  1:17   ` Eliot Courtney
2026-05-26  6:43   ` Boris Brezillon
2026-05-27 22:56   ` Deborah Brouwer
2026-05-28 12:56   ` Gary Guo
2026-05-25 23:01 ` [PATCH 2/2] gpu: drm: tyr: use IoMem directly instead of Devres Danilo Krummrich
2026-05-26  1:30   ` Alexandre Courbot
2026-05-26  2:43   ` Eliot Courtney
2026-05-27 23:03     ` Deborah Brouwer
2026-05-27 23:31       ` Danilo Krummrich
2026-05-28 12:58         ` Gary Guo
2026-05-28 21:51           ` Deborah Brouwer
2026-05-27 22:56   ` Deborah Brouwer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ahd2t_aHA5hk9xml@um790 \
    --to=deborah.brouwer@collabora.com \
    --cc=aliceryhl@google.com \
    --cc=boris.brezillon@collabora.com \
    --cc=dakr@kernel.org \
    --cc=daniel.almeida@collabora.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gary@garyguo.net \
    --cc=rust-for-linux@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.