All of lore.kernel.org
 help / color / mirror / Atom feed
From: Baoquan He <baoquan.he@linux.dev>
To: Christoph Hellwig <hch@lst.de>
Cc: akpm@linux-foundation.org, chrisl@kernel.org,
	usama.arif@linux.dev, kasong@tencent.com, nphamcs@gmail.com,
	shikemeng@huaweicloud.com, youngjun.park@lge.com,
	linux-mm@kvack.org
Subject: Re: [PATCH 2/8] mm: merge writeout into pageout
Date: Thu, 4 Jun 2026 17:44:44 +0800	[thread overview]
Message-ID: <aiFJDCUydGS9Q1YB@MiWiFi-R3L-srv> (raw)
In-Reply-To: <20260601113449.3464734-3-hch@lst.de>

On 06/01/26 at 01:34pm, Christoph Hellwig wrote:
> writeout is only called from pageout, and a straight flow at the end, so
> merge the two functions.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  mm/vmscan.c | 63 ++++++++++++++++++++++++-----------------------------
>  1 file changed, 29 insertions(+), 34 deletions(-)

Reviewed-by: Baoquan He <baoquan.he@linux.dev>

> 
> diff --git a/mm/vmscan.c b/mm/vmscan.c
> index e8a90911bf88..d7303eea1265 100644
> --- a/mm/vmscan.c
> +++ b/mm/vmscan.c
> @@ -612,45 +612,14 @@ typedef enum {
>  	PAGE_CLEAN,
>  } pageout_t;
>  
> -static pageout_t writeout(struct folio *folio, struct address_space *mapping,
> -		struct swap_iocb **plug, struct list_head *folio_list)
> -{
> -	int res;
> -
> -	folio_set_reclaim(folio);
> -
> -	/*
> -	 * The large shmem folio can be split if CONFIG_THP_SWAP is not enabled
> -	 * or we failed to allocate contiguous swap entries, in which case
> -	 * the split out folios get added back to folio_list.
> -	 */
> -	if (shmem_mapping(mapping))
> -		res = shmem_writeout(folio, plug, folio_list);
> -	else
> -		res = swap_writeout(folio, plug);
> -
> -	if (res < 0)
> -		handle_write_error(mapping, folio, res);
> -	if (res == AOP_WRITEPAGE_ACTIVATE) {
> -		folio_clear_reclaim(folio);
> -		return PAGE_ACTIVATE;
> -	}
> -
> -	/* synchronous write? */
> -	if (!folio_test_writeback(folio))
> -		folio_clear_reclaim(folio);
> -
> -	trace_mm_vmscan_write_folio(folio);
> -	node_stat_add_folio(folio, NR_VMSCAN_WRITE);
> -	return PAGE_SUCCESS;
> -}
> -
>  /*
>   * pageout is called by shrink_folio_list() for each dirty folio.
>   */
>  static pageout_t pageout(struct folio *folio, struct address_space *mapping,
>  			 struct swap_iocb **plug, struct list_head *folio_list)
>  {
> +	int res;
> +
>  	/*
>  	 * We no longer attempt to writeback filesystem folios here, other
>  	 * than tmpfs/shmem.  That's taken care of in page-writeback.
> @@ -674,7 +643,33 @@ static pageout_t pageout(struct folio *folio, struct address_space *mapping,
>  		return PAGE_ACTIVATE;
>  	if (!folio_clear_dirty_for_io(folio))
>  		return PAGE_CLEAN;
> -	return writeout(folio, mapping, plug, folio_list);
> +
> +	folio_set_reclaim(folio);
> +
> +	/*
> +	 * The large shmem folio can be split if CONFIG_THP_SWAP is not enabled
> +	 * or we failed to allocate contiguous swap entries, in which case
> +	 * the split out folios get added back to folio_list.
> +	 */
> +	if (shmem_mapping(mapping))
> +		res = shmem_writeout(folio, plug, folio_list);
> +	else
> +		res = swap_writeout(folio, plug);
> +
> +	if (res < 0)
> +		handle_write_error(mapping, folio, res);
> +	if (res == AOP_WRITEPAGE_ACTIVATE) {
> +		folio_clear_reclaim(folio);
> +		return PAGE_ACTIVATE;
> +	}
> +
> +	/* synchronous write? */
> +	if (!folio_test_writeback(folio))
> +		folio_clear_reclaim(folio);
> +
> +	trace_mm_vmscan_write_folio(folio);
> +	node_stat_add_folio(folio, NR_VMSCAN_WRITE);
> +	return PAGE_SUCCESS;
>  }
>  
>  /*
> -- 
> 2.53.0
> 


  reply	other threads:[~2026-06-04  9:45 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-01 11:34 better block swap batching and a different take on swap_ops v2 Christoph Hellwig
2026-06-01 11:34 ` [PATCH 1/8] shmem: provide a shmem_write_folio wrapper Christoph Hellwig
2026-06-04  9:43   ` Baoquan He
2026-06-05 17:07   ` Nhat Pham
2026-06-01 11:34 ` [PATCH 2/8] mm: merge writeout into pageout Christoph Hellwig
2026-06-04  9:44   ` Baoquan He [this message]
2026-06-05 17:07   ` Nhat Pham
2026-06-01 11:34 ` [PATCH 3/8] mm/swap: introduce struct swap_io_ctx Christoph Hellwig
2026-06-04 10:58   ` Baoquan He
2026-06-05 17:41   ` Nhat Pham
2026-06-01 11:34 ` [PATCH 4/8] mm/swap: also use struct swap_iocb for block I/O Christoph Hellwig
2026-06-04 10:59   ` Baoquan He
2026-06-04 11:37   ` Baoquan He
2026-06-01 11:34 ` [PATCH 5/8] mm/swap: remove count_swpout_vm_event Christoph Hellwig
2026-06-04 11:37   ` Baoquan He
2026-06-05 17:50   ` Nhat Pham
2026-06-01 11:34 ` [PATCH 6/8] mm/swap: use swap_ops to register swap device's methods Christoph Hellwig
2026-06-05 17:53   ` Nhat Pham
2026-06-01 11:34 ` [PATCH 7/8] mm/swap: remove SWP_FS_OPS Christoph Hellwig
2026-06-05  5:21   ` Baoquan He
2026-06-05 17:58   ` Nhat Pham
2026-06-01 11:34 ` [PATCH 8/8] mm/vmstat: add NRSWP{IN,OUT} counters Christoph Hellwig
2026-06-05  7:16   ` Baoquan He
2026-06-05 17:48   ` Nhat Pham
2026-06-01 13:29 ` better block swap batching and a different take on swap_ops v2 Baoquan He
2026-06-01 14:50   ` Christoph Hellwig
2026-06-01 15:17     ` Baoquan He
2026-06-01 15:25       ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aiFJDCUydGS9Q1YB@MiWiFi-R3L-srv \
    --to=baoquan.he@linux.dev \
    --cc=akpm@linux-foundation.org \
    --cc=chrisl@kernel.org \
    --cc=hch@lst.de \
    --cc=kasong@tencent.com \
    --cc=linux-mm@kvack.org \
    --cc=nphamcs@gmail.com \
    --cc=shikemeng@huaweicloud.com \
    --cc=usama.arif@linux.dev \
    --cc=youngjun.park@lge.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.