Re: [PATCH 0/5] edison: Fix mainline boot and convert the image to binman

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Sun, Jun 07, 2026 at 05:05:09PM -0600, Simon Glass wrote:
> Mainline U-Boot does not boot on the Intel Edison. The mask ROM enters
> the OS image 0x1000 above its load address, so U-Boot needs 4KB of zero
> padding ahead of it. That padding used to come from an alignment rule in
> board/intel/edison/config.mk, but the Kbuild-6.1 bump stopped that input
> being built, so u-boot.bin now starts with code at offset 0 and the ROM
> jumps into the middle of it.
> 
> This series moves the image build into binman: a new intel-osip entry
> generates the OSIP header (with the GPT-protective MBR the mask ROM
> needs) and a fill provides the 4KB gap, replacing the config.mk hack and
> restoring the boot. It also widens the DFU auto-probe window so an
> automated flash has time to start, adds the board to the sjg-lab CI and
> rewrites the documentation to separate a normal DFU update from xFSTK
> recovery.
> 
> Tested on real hardware: a bricked board recovers via xFSTK, takes a
> fresh U-Boot over DFU and boots the result.

I have got only patches 0-3, I will try to get them from lore.kernel.org.
So far I reviewed them and fully support the series, thanks!

-- 
With Best Regards,
Andy Shevchenko