All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mostafa Saleh <smostafa@google.com>
To: Pranjal Shrivastava <praan@google.com>
Cc: iommu@lists.linux.dev, Will Deacon <will@kernel.org>,
	Joerg Roedel <joro@8bytes.org>,
	Robin Murphy <robin.murphy@arm.com>,
	Jason Gunthorpe <jgg@ziepe.ca>,
	Nicolin Chen <nicolinc@nvidia.com>,
	Daniel Mentz <danielmentz@google.com>,
	Ashish Mhetre <amhetre@nvidia.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v8 05/12] iommu/arm-smmu-v3: Cache and restore MSI config
Date: Mon, 15 Jun 2026 17:04:02 +0000	[thread overview]
Message-ID: <ajAwgvSr1EbSj0tP@google.com> (raw)
In-Reply-To: <20260601215909.3958732-6-praan@google.com>

On Mon, Jun 01, 2026 at 09:59:02PM +0000, Pranjal Shrivastava wrote:
> The SMMU's MSI configuration registers (*_IRQ_CFGn) containing target
> address, data and memory attributes lose their state when the SMMU is
> powered down. We'll need to cache and restore their contents to ensure
> that MSIs work after the system resumes.
> 
> To address this, cache the original `msi_msg` within the `msi_desc`
> when the configuration is first written by `arm_smmu_write_msi_msg`.
> This primarily includes the target address and data since the memory
> attributes are fixed.
> 
> Introduce a new helper `arm_smmu_resume_msis` which will later be called
> during the driver's resume callback. The helper would retrieve the
> cached MSI message for each relevant interrupt (evtq, gerr, priq) via
> get_cached_msi_msg & re-config the registers via arm_smmu_write_msi_msg.
> 
> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
> Signed-off-by: Pranjal Shrivastava <praan@google.com>

Reviewed-by: Mostafa Saleh <smostafa@google.com>

Thanks,
Mostafa

> ---
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 37 +++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> index 8682be5060ed..93cee32f6c99 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> @@ -4551,6 +4551,9 @@ static void arm_smmu_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
>  	struct arm_smmu_device *smmu = dev_get_drvdata(dev);
>  	phys_addr_t *cfg = arm_smmu_msi_cfg[desc->msi_index];
>  
> +	/* Cache the msi_msg for resume */
> +	desc->msg = *msg;
> +
>  	doorbell = (((u64)msg->address_hi) << 32) | msg->address_lo;
>  	doorbell &= MSI_CFG0_ADDR_MASK;
>  
> @@ -4559,6 +4562,40 @@ static void arm_smmu_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
>  	writel_relaxed(ARM_SMMU_MEMATTR_DEVICE_nGnRE, smmu->base + cfg[2]);
>  }
>  
> +static void arm_smmu_resume_msi(struct arm_smmu_device *smmu,
> +				unsigned int irq, const char *name)
> +{
> +	struct msi_desc *desc;
> +	struct msi_msg msg;
> +
> +	if (!irq)
> +		return;
> +
> +	desc = irq_get_msi_desc(irq);
> +	if (!desc) {
> +		dev_err(smmu->dev, "Failed to resume msi: %s", name);
> +		return;
> +	}
> +
> +	get_cached_msi_msg(irq, &msg);
> +	arm_smmu_write_msi_msg(desc, &msg);
> +}
> +
> +static void arm_smmu_resume_msis(struct arm_smmu_device *smmu)
> +{
> +	if (!(smmu->features & ARM_SMMU_FEAT_MSI))
> +		return;
> +
> +	if (!dev_get_msi_domain(smmu->dev))
> +		return;
> +
> +	arm_smmu_resume_msi(smmu, smmu->gerr_irq, "gerror");
> +	arm_smmu_resume_msi(smmu, smmu->evtq.q.irq, "evtq");
> +
> +	if (smmu->features & ARM_SMMU_FEAT_PRI)
> +		arm_smmu_resume_msi(smmu, smmu->priq.q.irq, "priq");
> +}
> +
>  static void arm_smmu_setup_msis(struct arm_smmu_device *smmu)
>  {
>  	int ret, nvec = ARM_SMMU_MAX_MSIS;
> -- 
> 2.54.0.1013.g208068f2d8-goog
> 
> 

  reply	other threads:[~2026-06-15 17:04 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-01 21:58 [PATCH v8 00/10] iommu/arm-smmu-v3: Implement Runtime/System Sleep ops Pranjal Shrivastava
2026-06-01 21:58 ` [PATCH v8 01/12] iommu/arm-smmu-v3: Refactor arm_smmu_setup_irqs Pranjal Shrivastava
2026-06-01 21:58 ` [PATCH v8 02/12] iommu/arm-smmu-v3: Add a helper to drain cmd queues Pranjal Shrivastava
2026-06-02  0:12   ` Nicolin Chen
2026-06-02  3:28     ` Pranjal Shrivastava
2026-06-02  5:21   ` Daniel Mentz
2026-06-01 21:59 ` [PATCH v8 03/12] iommu/tegra241-cmdqv: Add a helper to drain VCMDQs Pranjal Shrivastava
2026-06-15 16:58   ` Mostafa Saleh
2026-06-01 21:59 ` [PATCH v8 04/12] iommu/tegra241-cmdqv: Restore PROD and CONS after resume Pranjal Shrivastava
2026-06-15 17:01   ` Mostafa Saleh
2026-06-15 17:43     ` Pranjal Shrivastava
2026-06-01 21:59 ` [PATCH v8 05/12] iommu/arm-smmu-v3: Cache and restore MSI config Pranjal Shrivastava
2026-06-15 17:04   ` Mostafa Saleh [this message]
2026-06-01 21:59 ` [PATCH v8 06/12] iommu/arm-smmu-v3: Handle gerror during suspend Pranjal Shrivastava
2026-06-02  0:15   ` Nicolin Chen
2026-06-02  3:31     ` Pranjal Shrivastava
2026-06-01 21:59 ` [PATCH v8 07/12] iommu/arm-smmu-v3: Add CMDQ_PROD_STOP_FLAG to gate CMDQ submissions Pranjal Shrivastava
2026-06-07 21:42   ` Daniel Mentz
2026-06-08  6:19     ` Pranjal Shrivastava
2026-06-09  4:20       ` Daniel Mentz
2026-06-09 10:05         ` Pranjal Shrivastava
2026-06-09 18:20           ` Daniel Mentz
2026-06-09 18:58             ` Pranjal Shrivastava
2026-06-10 17:37               ` Daniel Mentz
2026-06-01 21:59 ` [PATCH v8 08/12] iommu/tegra241-cmdqv: Add a helper to quiesce VCMDQs Pranjal Shrivastava
2026-06-02  0:14   ` Nicolin Chen
2026-06-02  3:37     ` Pranjal Shrivastava
2026-06-02  5:59       ` Nicolin Chen
2026-06-02  6:21         ` Pranjal Shrivastava
2026-06-02  6:29           ` Nicolin Chen
2026-06-01 21:59 ` [PATCH v8 09/12] iommu/arm-smmu-v3: Implement pm_runtime & system sleep ops Pranjal Shrivastava
2026-06-02  5:25   ` Daniel Mentz
2026-06-02 12:12     ` Pranjal Shrivastava
2026-06-07 22:36       ` Daniel Mentz
2026-06-02 15:27   ` Daniel Mentz
2026-06-09 10:13     ` Pranjal Shrivastava
2026-06-07 21:53   ` Daniel Mentz
2026-06-09 10:12     ` Pranjal Shrivastava
2026-06-07 22:30   ` Daniel Mentz
2026-06-09 10:09     ` Pranjal Shrivastava
2026-06-15 18:20   ` Mostafa Saleh
2026-06-15 19:44     ` Pranjal Shrivastava
2026-06-01 21:59 ` [PATCH v8 10/12] iommu/arm-smmu-v3: Enable pm_runtime and setup devlinks Pranjal Shrivastava
2026-06-01 21:59 ` [PATCH v8 11/12] iommu/arm-smmu-v3: Invoke pm_runtime before hw access Pranjal Shrivastava
2026-06-02  0:24   ` Nicolin Chen
2026-06-02  3:59     ` Pranjal Shrivastava
2026-06-02  5:51       ` Nicolin Chen
2026-06-02  6:24         ` Pranjal Shrivastava
2026-06-03 20:28   ` Daniel Mentz
2026-06-04  6:27     ` Pranjal Shrivastava
2026-06-07 22:22       ` Daniel Mentz
2026-06-09 10:34         ` Pranjal Shrivastava
2026-06-09 18:34           ` Daniel Mentz
2026-06-09 20:11             ` Pranjal Shrivastava
2026-06-10 17:13               ` Daniel Mentz
2026-06-01 21:59 ` [PATCH v8 12/12] iommu/arm-smmu-v3: Add KUnit unit tests for Runtime PM Pranjal Shrivastava
2026-06-02  6:03 ` [PATCH v8 00/10] iommu/arm-smmu-v3: Implement Runtime/System Sleep ops Nicolin Chen
2026-06-02 12:04   ` Pranjal Shrivastava

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ajAwgvSr1EbSj0tP@google.com \
    --to=smostafa@google.com \
    --cc=amhetre@nvidia.com \
    --cc=danielmentz@google.com \
    --cc=iommu@lists.linux.dev \
    --cc=jgg@ziepe.ca \
    --cc=joro@8bytes.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=nicolinc@nvidia.com \
    --cc=praan@google.com \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.