All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <andersson@kernel.org>
To: Vishnu Santhosh <vishnu.santhosh@oss.qualcomm.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	 linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,  bjorn.andersson@oss.qualcomm.com,
	chris.lew@oss.qualcomm.com, stephan.gerhold@linaro.org
Subject: Re: [PATCH v2] arm64: dts: qcom: shikra: Add BAM-DMUX support
Date: Sat, 11 Jul 2026 10:48:57 -0500	[thread overview]
Message-ID: <alJkSuke2B2SqP9e@baldur> (raw)
In-Reply-To: <20260711-qcom-shikra-dts-bam-dmux-v2-1-d5b33ee32138@oss.qualcomm.com>

On Sat, Jul 11, 2026 at 09:50:17AM +0530, Vishnu Santhosh wrote:
> Add required nodes to enable the upstream BAM-DMUX WWAN driver on
> Qualcomm Shikra SoC.
> 
> The SMSM (Shared Memory State Machine) node provides the power
> control signaling between the AP and modem for BAM-DMUX. The
> BAM DMA controller node describes the A2 modem BAM hardware as a
> standard DMA controller. The BAM-DMUX node references the DMA
> channels and the pc/pc-ack interrupt lines from the modem SMSM
> entry for power control signaling.
> 
> The BAM-DMUX node is placed below the modem remoteproc so that
> userspace can associate the resulting network interfaces with the
> owning remoteproc via udev/sysfs, matching how qcom_q6v5_mss.c
> already handles the equivalent node on older SoCs.
> 
> Signed-off-by: Vishnu Santhosh <vishnu.santhosh@oss.qualcomm.com>
> ---
> This depends on the "arm64: dts: qcom: Extend Shikra device tree
> with CDSP, LPAICP, MPSS remoteproc PAS and peripherals" series [1],
> which is still under review and adds the "remoteproc_mpss" node this
> series now attaches to.
> 
> The corresponding qcom_q6v5_pas.c change that makes the nested
> "qcom,bam-dmux" node actually probe is being sent separately, since
> it has no device tree dependency.
> 
> [1] https://lore.kernel.org/all/20260702-shikra-dt-m1-v5-0-f911ac92720c@oss.qualcomm.com/

Patch looks reasonable, if you get no other feedback, please rebase,
retest, and resubmit once the dependencies has landed.

Regards,
Bjorn

> 
> Changes in v2:
> - Move the "bam-dmux" node below the modem remoteproc
>   ("remoteproc_mpss"), instead of at the root, so that userspace can
>   associate the resulting network interfaces with the owning
>   remoteproc via udev/sysfs (Stephan)
> - Add the "shikra-dt-m1" series as a declared prerequisite, since it
>   introduces the "remoteproc_mpss" node this series now depends on
> - Link to v1: https://lore.kernel.org/r/20260611-qcom-shikra-dts-bam-dmux-v1-1-43d0b43d41ef@oss.qualcomm.com
> ---
>  arch/arm64/boot/dts/qcom/shikra.dtsi | 51 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
> index 205814c4b349ae19b605688357c6bd71e1ee61e9..246ea74d1fb1e293f0428d342301886dc52cb179 100644
> --- a/arch/arm64/boot/dts/qcom/shikra.dtsi
> +++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
> @@ -498,6 +498,28 @@ modem_smp2p_in: slave-kernel {
>  		};
>  	};
>  
> +	smsm {
> +		compatible = "qcom,smsm";
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		mboxes = <0>, <&apcs_glb 13>;
> +
> +		apps_smsm: apps@0 {
> +			reg = <0>;
> +			#qcom,smem-state-cells = <1>;
> +		};
> +
> +		modem_smsm: modem@1 {
> +			reg = <1>;
> +			interrupts = <GIC_SPI 69 IRQ_TYPE_EDGE_RISING 0>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +	};
> +
>  	soc: soc@0 {
>  		compatible = "simple-bus";
>  
> @@ -1864,6 +1886,23 @@ glink-edge {
>  				qcom,remote-pid = <1>;
>  				label = "mpss";
>  			};
> +
> +			bam_dmux: bam-dmux {
> +				compatible = "qcom,bam-dmux";
> +
> +				interrupts-extended = <&modem_smsm 1 IRQ_TYPE_EDGE_BOTH>,
> +						      <&modem_smsm 11 IRQ_TYPE_EDGE_BOTH>;
> +				interrupt-names = "pc",
> +						  "pc-ack";
> +
> +				qcom,smem-states = <&apps_smsm 1>,
> +						   <&apps_smsm 11>;
> +				qcom,smem-state-names = "pc",
> +							"pc-ack";
> +
> +				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
> +				dma-names = "tx", "rx";
> +			};
>  		};
>  
>  		remoteproc_cdsp: remoteproc@b300000 {
> @@ -1990,6 +2029,18 @@ glink-edge {
>  			};
>  		};
>  
> +		bam_dmux_dma: dma-controller@6044000 {
> +			compatible = "qcom,bam-v1.7.0";
> +			reg = <0x0 0x06044000 0x0 0x19000>;
> +			interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING 0>;
> +			#dma-cells = <1>;
> +			qcom,ee = <0>;
> +
> +			num-channels = <6>;
> +			qcom,num-ees = <1>;
> +			qcom,powered-remotely;
> +		};
> +
>  		sram@c11e000 {
>  			compatible = "qcom,shikra-imem", "mmio-sram";
>  			reg = <0x0 0x0c11e000 0x0 0x1000>;
> 
> ---
> base-commit: 6e845bcb78c95af935094040bd4edc3c2b6dd784
> change-id: 20260603-qcom-shikra-dts-bam-dmux-7fdcbb6fb662
> prerequisite-change-id: 20260429-shikra-gcc-rpmcc-clks-2094edfff3b0:v5
> prerequisite-patch-id: 59bb0a7828e41f546f734f127d81da83c0adcda9
> prerequisite-patch-id: 197da6bcb15cadc47869dba88c8020987b25c335
> prerequisite-patch-id: 8ec9c1eb03f052ae232ed54117abed38672c23f6
> prerequisite-patch-id: 350db4f4bcdfc0fad9ed57cd5b1723f85ad44f5d
> prerequisite-change-id: 20260524-shikra_epss_l3-522afe4fb8f5:v3
> prerequisite-patch-id: b5d7f75df02fde56181f576a936baf09d0a72276
> prerequisite-patch-id: 3ce52e07ae57139c2e2b71a29ed7d7250f6fcc87
> prerequisite-change-id: 20260511-shikra-dt-d75d97454646:v7
> prerequisite-patch-id: aa4ff7fbddd4c8836ce69aab89f2f91430194fcf
> prerequisite-patch-id: ac83151a889855498d36288ddd36216d451340c8
> prerequisite-patch-id: 2357cac636e019eaf14d6a493a1c72bca56fe405
> prerequisite-patch-id: 2885f299e711582da312ca9d13983d296a3dd5dc
> prerequisite-patch-id: 91af5f3c01e766a53ce8de69aa21847a2d6bbbf8
> prerequisite-change-id: 20260525-shikra-dt-m1-082dec382e7f:v5
> prerequisite-patch-id: 48ecd66c06c4fad81f91283c26ec57d95bbde29d
> prerequisite-patch-id: 7d92e5a301d09616840e54dc9e4a81f30a64383c
> prerequisite-patch-id: be1a16f53e23dd5ab90210a056c9da3559c6186d
> prerequisite-patch-id: 3eff04500c55100c763aeac1f1f8c5768d500500
> prerequisite-patch-id: ab22c5fdb2fa65b78ffef76bbe4459c8d5ffe7b2
> prerequisite-patch-id: cb24efedb648271ef5c60ace96e2366d89254e8f
> prerequisite-patch-id: 8be7df0395c5847a988c7e814c7db878b5932b11
> prerequisite-patch-id: 0510992d022cef7317b6efee6765ac78c0225356
> prerequisite-patch-id: de4327fcbe81f92a337f429b74e8220969a5b79f
> prerequisite-patch-id: 968bffc36646412f8289b917f37e762a4297bcc8
> prerequisite-patch-id: 35944403bd4480caad12657342da15ea71c6afbd
> 



> Best regards,
> -- 
> Vishnu Santhosh <vishnu.santhosh@oss.qualcomm.com>
> 

      reply	other threads:[~2026-07-11 15:49 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-11  4:20 [PATCH v2] arm64: dts: qcom: shikra: Add BAM-DMUX support Vishnu Santhosh
2026-07-11 15:48 ` Bjorn Andersson [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alJkSuke2B2SqP9e@baldur \
    --to=andersson@kernel.org \
    --cc=bjorn.andersson@oss.qualcomm.com \
    --cc=chris.lew@oss.qualcomm.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=stephan.gerhold@linaro.org \
    --cc=vishnu.santhosh@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.