Re: [PATCH net-next v7 3/4] net: pse-pd: realtek-pse-mcu: add I2C transport

[Oleksij Rempel <o.rempel@pengutronix.de>]

On Sun, Jul 12, 2026 at 07:22:49PM +0000, Jonas Jelonek wrote:
> Add the I2C/SMBus transport for the Realtek PSE MCU core. It registers
> the MCU on an I2C bus and provides the send/recv callbacks the core
> uses to exchange the 12-byte frames.
> 
> The MCU firmware expects one of two framings on the I2C bus, and which one
> is part of the compatible: '-smbus' (reads carry a leading command byte
> and a repeated start) or raw '-i2c' (bare block writes and reads). The
> match data flags the raw-I2C case; SMBus is the default because that's
> what the majority of devices uses.
> 
> Because i2c_master_send()/i2c_master_recv() may DMA, the raw-I2C path
> bounces each frame through a heap buffer rather than the core's stack
> buffers; the SMBus path is unaffected.
> 
> Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>

Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>

Thank you!
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |