From: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
To: Pavel Machek <pavel@nabladev.com>
Cc: cip-dev@lists.cip-project.org,
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>,
Biju Das <biju.das.jz@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
tomm.merciai@gmail.com
Subject: Re: [PATCH 6.1.y-cip 00/32] Add RSPI support for RZ/G3E SoC
Date: Tue, 14 Jul 2026 09:44:25 +0200 [thread overview]
Message-ID: <alXo2aQkK6ajqmaI@tom-desktop> (raw)
In-Reply-To: <ak9oegpiSZVBH6L5@tom-desktop>
Hi Pavel,
On Thu, Jul 09, 2026 at 11:23:06AM +0200, Tommaso Merciai wrote:
> Hi Pavel,
> Thanks for your work.
>
> On Sat, Jun 27, 2026 at 11:35:36PM +0200, Pavel Machek wrote:
> > Hi!
> >
> > > This patch series adds RSPI support for the Renesas RZ/G3E SoC, which
> > > features three RSPI controllers. The series also enables DMA support in
> > > the RSPI driver, and backports the necessary infrastructure changes
> > > into linux-6.1.y-cip.
> >
> > Thank you, applied.
>
> Just to double check with you.
> I'm not seeing this patch applied on [1].
*this series applied.
Shall I rebase and resend?
Please let me know. Thanks.
Kind Regards,
Tommaso
> Maybe I'm missing somenthing?
>
>
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip.git/log/?h=linux-6.1.y-cip
>
> Kind Regards,
> Tommaso
>
> >
> > Best regards,
> > Pavel
>
>
>
prev parent reply other threads:[~2026-07-14 7:44 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-17 8:29 [PATCH 6.1.y-cip 00/32] Add RSPI support for RZ/G3E SoC Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 01/32] dmaengine: Add devm_dma_request_chan() Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 02/32] spi: Introduce internal spi_xfer_is_dma_mapped() helper Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 03/32] clk: renesas: r9a09g047: Add entries for the RSPIs Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 04/32] spi: dt-bindings: renesas,rzv2h-rspi: document optional support for DMA Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 05/32] spi: dt-bindings: renesas,rzv2h-rspi: allow multiple DMAs Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 06/32] spi: dt-bindings: renesas,rzv2h-rspi: Document dmas property Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 07/32] spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/G3E SoC support Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 08/32] spi: rzv2h-rspi: make resets optional Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 09/32] spi: rzv2h-rspi: make FIFO size chip-specific Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 10/32] spi: rzv2h-rspi: make clocks chip-specific Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 11/32] spi: rzv2h-rspi: move register writes out of rzv2h_rspi_setup_clock() Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 12/32] spi: rzv2h-rspi: avoid recomputing transfer frequency Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 13/32] spi: rzv2h-rspi: make transfer clock rate finding chip-specific Tommaso Merciai
2026-06-27 11:09 ` Pavel Machek
2026-06-17 8:29 ` [PATCH 6.1.y-cip 14/32] spi: rzv2h-rspi: add support for using PCLK for transfer clock Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 15/32] spi: rzv2h-rspi: add support for variable " Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 16/32] spi: rzv2h-rspi: add support for loopback mode Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 17/32] spi: rzv2h-rspi: add support for RZ/T2H and RZ/N2H Tommaso Merciai
2026-06-27 11:11 ` [cip-dev] " Pavel Machek
2026-06-17 8:29 ` [PATCH 6.1.y-cip 18/32] spi: rzv2h-rspi: fix rzv2h_rspi_transfer_one() indentation Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 19/32] spi: rzv2h-rspi: remove call to spi_finalize_current_transfer() Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 20/32] spi: rzv2h-rspi: use device-managed APIs Tommaso Merciai
2026-06-27 11:27 ` Pavel Machek
2026-06-17 8:29 ` [PATCH 6.1.y-cip 21/32] spi: rzv2h-rspi: store RX interrupt in state Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 22/32] spi: rzv2h-rspi: set MUST_RX/MUST_TX Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 23/32] spi: rzv2h-rspi: set TX FIFO threshold to 0 Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 24/32] spi: rzv2h-rspi: enable TX buffer empty interrupt Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 25/32] spi: rzv2h-rspi: split out PIO transfer Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 26/32] spi: rzv2h-rspi: add support for DMA mode Tommaso Merciai
2026-06-27 11:20 ` Pavel Machek
2026-06-17 8:29 ` [PATCH 6.1.y-cip 27/32] spi: rzv2h-rspi: Fix max_speed_hz advertising prohibited bit rate Tommaso Merciai
2026-06-17 8:29 ` [PATCH 6.1.y-cip 28/32] spi: rzv2h-rspi: Fix invalid SPR=0/BRDV=0 clock configuration Tommaso Merciai
2026-06-17 8:30 ` [PATCH 6.1.y-cip 29/32] spi: rzv2h-rspi: Simplify clock rate search function signatures Tommaso Merciai
2026-06-17 8:30 ` [PATCH 6.1.y-cip 30/32] spi: rzv2h-rspi: Fix silent failure in clock setup error path Tommaso Merciai
2026-06-17 8:30 ` [PATCH 6.1.y-cip 31/32] arm64: dts: renesas: r9a09g047: Add RSPI nodes Tommaso Merciai
2026-06-17 8:30 ` [PATCH 6.1.y-cip 32/32] arm64: dts: renesas: r9a09g047e57-smarc: Enable RSPI0 Tommaso Merciai
2026-06-22 9:15 ` [PATCH 6.1.y-cip 00/32] Add RSPI support for RZ/G3E SoC Pavel Machek
2026-06-27 21:35 ` Pavel Machek
2026-07-09 9:23 ` Tommaso Merciai
2026-07-14 7:44 ` Tommaso Merciai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alXo2aQkK6ajqmaI@tom-desktop \
--to=tommaso.merciai.xr@bp.renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=pavel@nabladev.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=tomm.merciai@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.