All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: Fernando Rimoli <fernandorimoli11@gmail.com>
Cc: Daniel Scally <dan.scally@ideasonboard.com>,
	linux-media@vger.kernel.org,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] media: ov5693: add OVTI5693 ACPI HID for IPU6 Surface devices
Date: Tue, 14 Jul 2026 12:32:40 +0300	[thread overview]
Message-ID: <alYCOJR2PZoMJYTS@kekkonen.localdomain> (raw)
In-Reply-To: <20260708213633.18392-1-fernandorimoli11@gmail.com>

Hi Fernando,

On Wed, Jul 08, 2026 at 11:36:33PM +0200, Fernando Rimoli wrote:
> The ov5693 driver only matches the "INT33BE" ACPI HID. Some Intel IPU6
> Surface devices (e.g. Microsoft Surface Pro 9) enumerate the same OV5693
> front camera with the ACPI HID "OVTI5693" instead. Without this HID the
> i2c core never binds the driver, and the IPU bridge never builds the
> firmware node graph for the sensor, so the front camera is unusable.

Could you split this into two, once for each?

> 
> Add "OVTI5693" to the sensor driver's ACPI match table and to the IPU
> bridge's supported-sensor list. The link frequency (419200000) matches
> the existing INT33BE entry, as it is the same sensor. Devices that use
> "INT33BE" (e.g. Surface Go 4) are unaffected.
> 
> Tested on Surface Pro 9 (IPU6): the sensor enumerates as OVTI5693:00
> (ACPI path \_SB_.PC00.I2C3.CAMF) and binds with this change.
> 
> Link: https://github.com/linux-surface/linux-surface/pull/2171
> Signed-off-by: Fernando Rimoli <fernandorimoli11@gmail.com>
> ---
> Note: this HID addition makes the sensor bind and enumerate, but a fully
> working front camera on IPU6 also requires programming MIPI_CTRL00
> (0x4800 = 0x2d) before stream-on, otherwise the IPU6 CSI-2 receiver never
> locks and capture times out. That register change is being handled
> separately (see the Link: above). This patch is independent and useful on
> its own for enumeration, so I'm sending it standalone; happy to reorder if
> you'd prefer it after the register fix.

Have you tested other values for 0x4800? Besides IPU3 (CIO2), the sensor is
used on a Rockchip board, so changing the settings needs to be done with
care.

If you haven't, I'd be interested to know how 0x04 works -- it should be a
safe change (LP00 -> LP11 in idle). If not, then testing other individual
bits would be useful as well; hopefully changing one bit makes a
difference.

-- 
Kind regards,

Sakari Ailus

  parent reply	other threads:[~2026-07-14  9:32 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-08 21:36 [PATCH] media: ov5693: add OVTI5693 ACPI HID for IPU6 Surface devices Fernando Rimoli
2026-07-09 13:17 ` Dan Scally
2026-07-14  9:32 ` Sakari Ailus [this message]
2026-07-17 13:20 ` [PATCH v2 0/3] media: Enable the OV5693 front camera on " Fernando Rimoli
2026-07-17 13:20   ` [PATCH v2 1/3] media: i2c: ov5693: Add OVTI5693 ACPI HID Fernando Rimoli
2026-07-17 13:20   ` [PATCH v2 2/3] media: ipu-bridge: Add OVTI5693 to the list of supported sensors Fernando Rimoli
2026-07-17 13:20   ` [PATCH v2 3/3] media: i2c: ov5693: Gate the MIPI clock lane for IPU6 Fernando Rimoli
2026-07-19 16:25     ` Jakob Berg Jespersen
2026-07-19 22:42     ` Sakari Ailus
2026-07-20 16:38   ` [PATCH v3 0/4] media: Enable the OV5693 front camera on IPU6 Surface devices Fernando Rimoli
2026-07-20 16:38     ` [PATCH v3 1/4] media: i2c: ov5693: Add OVTI5693 ACPI HID Fernando Rimoli
2026-07-20 16:38     ` [PATCH v3 2/4] media: ipu-bridge: Add OVTI5693 to the list of supported sensors Fernando Rimoli
2026-07-20 21:09       ` Dan Scally
2026-07-20 16:38     ` [PATCH v3 3/4] media: i2c: ov5693: Gate the MIPI clock lane for non-continuous clock Fernando Rimoli
2026-07-20 21:49       ` Dan Scally
2026-07-30  7:46       ` Sakari Ailus
2026-08-31 18:16         ` Fernando Rimoli
2026-07-20 16:38     ` [PATCH v3 4/4] media: ipu-bridge: Request non-continuous clock for ov5693 on IPU6 Fernando Rimoli
2026-07-20 21:56       ` Dan Scally
2026-07-20 23:50         ` Fernando Rimoli
2026-07-30  7:32           ` Sakari Ailus
2026-08-31 18:17             ` Fernando Rimoli
2026-08-31 18:18         ` Fernando Rimoli
2026-08-31 18:18     ` [PATCH v4 0/6] media: Enable the OV5693 front camera on IPU6 Surface devices Fernando Rimoli
2026-08-31 18:18       ` [PATCH v4 1/6] media: i2c: ov5693: Add OVTI5693 ACPI HID Fernando Rimoli
2026-08-31 18:18       ` [PATCH v4 2/6] media: ipu-bridge: Add OVTI5693 to the list of supported sensors Fernando Rimoli
2026-08-31 18:18       ` [PATCH v4 3/6] media: i2c: ov5693: Gate the MIPI clock lane for non-continuous clock Fernando Rimoli
2026-09-01  9:32         ` Jakob Berg Jespersen
2026-09-01  9:56           ` Fernando Rimoli
2026-09-01 16:34           ` Fernando Rimoli
2026-09-01 18:32             ` Jakob Berg Jespersen
2026-09-01 18:46         ` Fil Dunsky
2026-09-02  7:27         ` Sakari Ailus
2026-08-31 18:18       ` [PATCH v4 4/6] media: ipu-bridge: Assign endpoint property indices dynamically Fernando Rimoli
2026-09-02  6:33         ` Sakari Ailus
2026-08-31 18:18       ` [PATCH v4 5/6] media: ipu-bridge: Match sensor configs per IPU and add config flags Fernando Rimoli
2026-09-01  9:57         ` Fernando Rimoli
2026-09-02  6:42         ` Sakari Ailus
2026-08-31 18:18       ` [PATCH v4 6/6] media: ipu-bridge: Request non-continuous clock for ov5693 on IPU6 Fernando Rimoli
2026-09-02  4:42         ` Kengo Oki
2026-09-02 14:23       ` [PATCH v5 0/7] media: Enable the OV5693 front camera on IPU6 Surface devices Fernando Rimoli
2026-09-02 14:23         ` [PATCH v5 1/7] media: i2c: ov5693: Add OVTI5693 ACPI HID Fernando Rimoli
2026-09-02 14:23         ` [PATCH v5 2/7] media: ipu-bridge: Add OVTI5693 to the list of supported sensors Fernando Rimoli
2026-09-02 14:23         ` [PATCH v5 3/7] dt-bindings: media: ov5693: Add clock-noncontinuous Fernando Rimoli
2026-09-02 17:27           ` Conor Dooley
2026-09-02 14:23         ` [PATCH v5 4/7] media: i2c: ov5693: Gate the MIPI clock lane for non-continuous clock Fernando Rimoli
2026-09-02 19:11           ` Fil Dunsky
2026-09-02 14:23         ` [PATCH v5 5/7] media: ipu-bridge: Assign endpoint property indices dynamically Fernando Rimoli
2026-09-02 14:23         ` [PATCH v5 6/7] media: ipu-bridge: Match sensor configs per IPU and add config flags Fernando Rimoli
2026-09-02 14:23         ` [PATCH v5 7/7] media: ipu-bridge: Request non-continuous clock for ov5693 on IPU6 Fernando Rimoli
2026-09-05 21:13           ` D. Manresa
2026-09-06  7:39         ` [PATCH v5 0/7] media: Enable the OV5693 front camera on IPU6 Surface devices D. Manresa
2026-09-14 18:06           ` Fernando Rimoli
2026-09-21 22:32             ` D. Manresa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alYCOJR2PZoMJYTS@kekkonen.localdomain \
    --to=sakari.ailus@linux.intel.com \
    --cc=dan.scally@ideasonboard.com \
    --cc=fernandorimoli11@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.