All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jiajia Liu <liujiajia@kylinos.cn>
To: "Korenblit, Miriam Rachel" <miriam.rachel.korenblit@intel.com>
Cc: "Berg, Benjamin" <benjamin.berg@intel.com>,
	"Berg, Johannes" <johannes.berg@intel.com>,
	"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] wifi: iwlwifi: use unique thermal zone type
Date: Wed, 15 Jul 2026 09:31:40 +0800	[thread overview]
Message-ID: <albi_EA_RuiEQ8kK@nature> (raw)
In-Reply-To: <DS0PR11MB7880D6838D23BBE2A821FF1BA3F92@DS0PR11MB7880.namprd11.prod.outlook.com>

On Tue, Jul 14, 2026 at 06:58:40PM +0000, Korenblit, Miriam Rachel wrote:
> 
> 
> > -----Original Message-----
> > From: Jiajia Liu <liujiajia@kylinos.cn>
> > Sent: Thursday, March 12, 2026 3:41 AM
> > To: Korenblit, Miriam Rachel <miriam.rachel.korenblit@intel.com>; Berg,
> > Benjamin <benjamin.berg@intel.com>; Berg, Johannes
> > <johannes.berg@intel.com>; linux-wireless@vger.kernel.org; linux-
> > kernel@vger.kernel.org
> > Cc: Jiajia Liu <liujiajia@kylinos.cn>
> > Subject: [PATCH] wifi: iwlwifi: use unique thermal zone type
> > 
> > Unloading iwlmld or iwlmvm can trigger hung task when two devices using
> > iwlmvm and iwlmld respectively on one setup. Their thermal zones have the
> > same type and share the same hwmon device created by the first zone. The
> > second zone indirectly holds the first zone through hwmon and prevents the first
> > zone from unregistering.
> > Tested with AX211 (8086:7af0) and BE200 (8086:272b).
> > 
> > INFO: task modprobe:5295 blocked for more than 120 seconds.
> >       Not tainted 7.0.0-rc2-up1 #2
> > Call Trace:
> >  __schedule+0x4df/0xfd0
> >  schedule+0x27/0xd0
> >  schedule_timeout+0xbd/0x100
> >  __wait_for_common+0x97/0x1b0
> >  ? __pfx_schedule_timeout+0x10/0x10
> >  thermal_zone_device_unregister+0x173/0x1c0
> >  iwl_mld_thermal_exit+0xbb/0xd0 [iwlmld]
> >  iwl_op_mode_mld_stop+0x37/0x120 [iwlmld]
> >  iwl_opmode_deregister+0xc0/0x160 [iwlwifi]
> >  __do_sys_delete_module+0x1b5/0x320
> > 
> > Signed-off-by: Jiajia Liu <liujiajia@kylinos.cn>
> > ---
> >  drivers/net/wireless/intel/iwlwifi/iwl-utils.c   | 10 ++++++++++
> >  drivers/net/wireless/intel/iwlwifi/iwl-utils.h   |  4 ++++
> >  drivers/net/wireless/intel/iwlwifi/mld/thermal.c |  4 ++--
> >  drivers/net/wireless/intel/iwlwifi/mvm/tt.c      |  6 ++++--
> >  4 files changed, 20 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-utils.c
> > b/drivers/net/wireless/intel/iwlwifi/iwl-utils.c
> > index d503544fda40..fe5fa5e59664 100644
> > --- a/drivers/net/wireless/intel/iwlwifi/iwl-utils.c
> > +++ b/drivers/net/wireless/intel/iwlwifi/iwl-utils.c
> > @@ -193,3 +193,13 @@ s8 iwl_average_neg_dbm(const u8 *neg_dbm_values,
> > u8 len)
> >  	return clamp(average_magnitude - i, -128, 0);  }
> > IWL_EXPORT_SYMBOL(iwl_average_neg_dbm);
> > +
> > +#ifdef CONFIG_THERMAL
> > +u8 iwl_thermal_zone_get_id(void)
> > +{
> > +	static atomic_t counter = ATOMIC_INIT(0);
> > +
> > +	return atomic_inc_return(&counter) & 0xFF; }
> > +IWL_EXPORT_SYMBOL(iwl_thermal_zone_get_id);
> > +#endif
> > diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-utils.h
> > b/drivers/net/wireless/intel/iwlwifi/iwl-utils.h
> > index 5172035e4d26..84a4543fd290 100644
> > --- a/drivers/net/wireless/intel/iwlwifi/iwl-utils.h
> > +++ b/drivers/net/wireless/intel/iwlwifi/iwl-utils.h
> > @@ -55,4 +55,8 @@ u32 iwl_find_ie_offset(u8 *beacon, u8 eid, u32 frame_size)
> > 
> >  s8 iwl_average_neg_dbm(const u8 *neg_dbm_values, u8 len);
> > 
> > +#ifdef CONFIG_THERMAL
> > +u8 iwl_thermal_zone_get_id(void);
> > +#endif
> > +
> >  #endif /* __iwl_utils_h__ */
> > diff --git a/drivers/net/wireless/intel/iwlwifi/mld/thermal.c
> > b/drivers/net/wireless/intel/iwlwifi/mld/thermal.c
> > index f8a8c35066be..500028a4dbd3 100644
> > --- a/drivers/net/wireless/intel/iwlwifi/mld/thermal.c
> > +++ b/drivers/net/wireless/intel/iwlwifi/mld/thermal.c
> > @@ -5,6 +5,7 @@
> >  #ifdef CONFIG_THERMAL
> >  #include <linux/sort.h>
> >  #include <linux/thermal.h>
> > +#include "iwl-utils.h"
> >  #endif
> > 
> >  #include "fw/api/phy.h"
> > @@ -243,7 +244,6 @@ static void iwl_mld_thermal_zone_register(struct
> > iwl_mld *mld)  {
> >  	int ret;
> >  	char name[16];
> > -	static atomic_t counter = ATOMIC_INIT(0);
> >  	struct thermal_trip trips[IWL_MAX_DTS_TRIPS] = {
> >  		[0 ... IWL_MAX_DTS_TRIPS - 1] = {
> >  			.temperature = THERMAL_TEMP_INVALID, @@ -254,7
> > +254,7 @@ static void iwl_mld_thermal_zone_register(struct iwl_mld *mld)
> > 
> >  	BUILD_BUG_ON(ARRAY_SIZE(name) >= THERMAL_NAME_LENGTH);
> > 
> > -	sprintf(name, "iwlwifi_%u", atomic_inc_return(&counter) & 0xFF);
> Any reason not to have iwlmld (and iwlmvm in mvm) instead of a shared counter?

I was not sure if it would break user space.

This issue is fixed by thermal hwmon at

https://lore.kernel.org/linux-pm/6017595.DvuYhMxLoT@rafael.j.wysocki/

with commit d6323469bcfb ("thermal: hwmon: Register a hwmon device for each thermal zone") in v7.2-rc1.

> 
> > +	sprintf(name, "iwlwifi_%u", iwl_thermal_zone_get_id());
> >  	mld->tzone =
> >  		thermal_zone_device_register_with_trips(name, trips,
> >  							IWL_MAX_DTS_TRIPS,
> > diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
> > b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
> > index 53bab21ebae2..ea8e616174db 100644
> > --- a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
> > +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
> > @@ -7,6 +7,9 @@
> >  #include <linux/sort.h>
> > 
> >  #include "mvm.h"
> > +#ifdef CONFIG_THERMAL
> > +#include "iwl-utils.h"
> > +#endif
> > 
> >  #define IWL_MVM_NUM_CTDP_STEPS		20
> >  #define IWL_MVM_MIN_CTDP_BUDGET_MW	150
> > @@ -652,7 +655,6 @@ static void iwl_mvm_thermal_zone_register(struct
> > iwl_mvm *mvm)  {
> >  	int i, ret;
> >  	char name[16];
> > -	static atomic_t counter = ATOMIC_INIT(0);
> > 
> >  	if (!iwl_mvm_is_tt_in_fw(mvm)) {
> >  		mvm->tz_device.tzone = NULL;
> > @@ -662,7 +664,7 @@ static void iwl_mvm_thermal_zone_register(struct
> > iwl_mvm *mvm)
> > 
> >  	BUILD_BUG_ON(ARRAY_SIZE(name) >= THERMAL_NAME_LENGTH);
> > 
> > -	sprintf(name, "iwlwifi_%u", atomic_inc_return(&counter) & 0xFF);
> > +	sprintf(name, "iwlwifi_%u", iwl_thermal_zone_get_id());
> >  	/*
> >  	 * 0 is a valid temperature,
> >  	 * so initialize the array with S16_MIN which invalid temperature
> > --
> > 2.53.0
> 

      reply	other threads:[~2026-07-15  1:31 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-12  1:40 [PATCH] wifi: iwlwifi: use unique thermal zone type Jiajia Liu
2026-07-14 18:58 ` Korenblit, Miriam Rachel
2026-07-15  1:31   ` Jiajia Liu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=albi_EA_RuiEQ8kK@nature \
    --to=liujiajia@kylinos.cn \
    --cc=benjamin.berg@intel.com \
    --cc=johannes.berg@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=miriam.rachel.korenblit@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.