From: "Robert P. J. Day" <rpjday@crashcourse.ca>
To: "U-Boot Version 2 (barebox)" <barebox@lists.infradead.org>
Subject: unused CONFIG variables in current barebox tree
Date: Sun, 20 Dec 2009 06:38:55 -0500 (EST) [thread overview]
Message-ID: <alpine.LFD.2.00.0912200633440.15922@localhost> (raw)
not sure if this is where this sort of thing should be posted, but i
used one of my stock kernel scanning scripts on the current barebox
tree to locate any CONFIG variables that are defined in a Kconfig file
somewhere but never subsequently tested in a preprocessor directive,
and here's the output. (it would be trivial to run the other scripts
to locate more oddities.)
===== ARCH_LINUX
arch/sandbox/Kconfig:14:config ARCH_LINUX
===== BFIN_BOOT_FLASH8
arch/blackfin/Kconfig:58:config BFIN_BOOT_FLASH8
===== CMD_SAVES
commands/Kconfig:141:config CMD_SAVES
===== CPU_32
arch/arm/cpu/Kconfig:3:config CPU_32
===== EARLY_CONSOLE_BAUDRATE
common/Kconfig:304:config EARLY_CONSOLE_BAUDRATE
===== EARLY_CONSOLE_PORT
arch/ppc/mach-mpc5xxx/Kconfig:14:config EARLY_CONSOLE_PORT
common/Kconfig:295:config EARLY_CONSOLE_PORT
===== EARLY_CONSOLE_PORT
arch/ppc/mach-mpc5xxx/Kconfig:14:config EARLY_CONSOLE_PORT
common/Kconfig:295:config EARLY_CONSOLE_PORT
===== EUKREA_CPUIMX27_NOR_32MB
arch/arm/mach-imx/Kconfig:278:config EUKREA_CPUIMX27_NOR_32MB
===== HAS_CFI
arch/arm/mach-at91rm9200/Kconfig:18: select HAS_CFI
arch/arm/mach-netx/Kconfig:49: select HAS_CFI
arch/arm/mach-imx/Kconfig:85: select HAS_CFI
arch/arm/mach-imx/Kconfig:105: select HAS_CFI
arch/arm/mach-imx/Kconfig:126: select HAS_CFI
arch/arm/mach-imx/Kconfig:146: select HAS_CFI
arch/arm/mach-imx/Kconfig:155: select HAS_CFI
arch/arm/mach-imx/Kconfig:171: select HAS_CFI
arch/arm/mach-imx/Kconfig:215: select HAS_CFI
arch/arm/mach-imx/Kconfig:223: select HAS_CFI
arch/ppc/Kconfig:54: select HAS_CFI
arch/m68k/Kconfig:77: select HAS_CFI
arch/m68k/Kconfig:85: select HAS_CFI
arch/m68k/Kconfig:94: select HAS_CFI
arch/m68k/Kconfig:102: select HAS_CFI
arch/m68k/Kconfig:110: select HAS_CFI
arch/m68k/Kconfig:119: select HAS_CFI
arch/m68k/Kconfig:128: select HAS_CFI
arch/m68k/Kconfig:137: select HAS_CFI
drivers/nor/Kconfig:3:config HAS_CFI
===== M68K
arch/m68k/include/asm/byteorder.h:24: * M68K is always big-endian mode.
arch/m68k/include/asm/coldfire/mcf5xxx.h:28: * Common M68K & ColdFire definitions
arch/m68k/Kconfig:49:config M68K
arch/m68k/cpu/cpu.c:157: * For M68K we never enable data cache so we do not need to disable it again.
commands/bootm.c:141: case IH_CPU_M68K: arch = "M68K"; break;
include/image.h:76:#define IH_CPU_M68K 12 /* M68K */
===== MTD_NAND_DISKONCHIP_BBTWRITE
drivers/nand/Kconfig:86:config MTD_NAND_DISKONCHIP_BBTWRITE
drivers/nand/diskonchip.c:123:#ifdef MTD_NAND_DISKONCHIP_BBTWRITE
===== PARTITION
common/Kconfig:316:config PARTITION
drivers/nand/diskonchip.c:1287: printk(KERN_INFO " PARTITION[%d] ->\n"
===== PCM043_DISPLAY_TY090
arch/arm/mach-imx/Kconfig:243:config PCM043_DISPLAY_TY090
rday
--
========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA
Linux Consulting, Training and Kernel Pedantry.
Web page: http://crashcourse.ca
Twitter: http://twitter.com/rpjday
========================================================================
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2009-12-20 11:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-20 11:38 Robert P. J. Day [this message]
2009-12-21 9:09 ` unused CONFIG variables in current barebox tree Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.2.00.0912200633440.15922@localhost \
--to=rpjday@crashcourse.ca \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.