From: Thomas Gleixner <tglx@linutronix.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>,
x86@kernel.org
Subject: [GIT pull] x86 fixes for 3.2
Date: Fri, 9 Dec 2011 21:29:19 +0100 (CET) [thread overview]
Message-ID: <alpine.LFD.2.02.1112092128150.3020@ionos> (raw)
Linus,
Please pull the latest x86-urgent-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git x86-urgent-for-linus
Thanks,
tglx
------------------>
Alan Cox (2):
x86/intel_mid: Fix the Kconfig for MID selection
x86/intel_mid: Kconfig select fix
Mark Langsdorf (1):
x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked
Matt Fleming (1):
x86, efi: Calling __pa() with an ioremap()ed address is invalid
arch/x86/Kconfig | 8 ++++++--
arch/x86/include/asm/e820.h | 8 ++++++++
arch/x86/include/asm/efi.h | 5 -----
arch/x86/kernel/e820.c | 3 ++-
arch/x86/kernel/hpet.c | 21 ++++++++++++++-------
arch/x86/kernel/setup.c | 21 ++++++++++++++++++++-
arch/x86/platform/efi/efi.c | 29 ++++++++++++++++++-----------
arch/x86/platform/efi/efi_64.c | 17 -----------------
8 files changed, 68 insertions(+), 44 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cb9a104..efb4294 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -390,7 +390,7 @@ config X86_INTEL_CE
This option compiles in support for the CE4100 SOC for settop
boxes and media devices.
-config X86_INTEL_MID
+config X86_WANT_INTEL_MID
bool "Intel MID platform support"
depends on X86_32
depends on X86_EXTENDED_PLATFORM
@@ -399,7 +399,10 @@ config X86_INTEL_MID
systems which do not have the PCI legacy interfaces (Moorestown,
Medfield). If you are building for a PC class system say N here.
-if X86_INTEL_MID
+if X86_WANT_INTEL_MID
+
+config X86_INTEL_MID
+ bool
config X86_MRST
bool "Moorestown MID platform"
@@ -411,6 +414,7 @@ config X86_MRST
select SPI
select INTEL_SCU_IPC
select X86_PLATFORM_DEVICES
+ select X86_INTEL_MID
---help---
Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
Internet Device(MID) platform. Moorestown consists of two chips:
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 908b969..c954703 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -53,6 +53,13 @@
*/
#define E820_RESERVED_KERN 128
+/*
+ * Address ranges that need to be mapped by the kernel direct
+ * mapping. This is used to make sure regions such as
+ * EFI_RUNTIME_SERVICES_DATA are directly mapped. See setup_arch().
+ */
+#define E820_RESERVED_EFI 129
+
#ifndef __ASSEMBLY__
#include <linux/types.h>
struct e820entry {
@@ -115,6 +122,7 @@ static inline void early_memtest(unsigned long start, unsigned long end)
}
#endif
+extern unsigned long e820_end_pfn(unsigned long limit_pfn, unsigned type);
extern unsigned long e820_end_of_ram_pfn(void);
extern unsigned long e820_end_of_low_ram_pfn(void);
extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index 7093e4a..b8d8bfc 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -33,8 +33,6 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...);
#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \
efi_call_virt(f, a1, a2, a3, a4, a5, a6)
-#define efi_ioremap(addr, size, type) ioremap_cache(addr, size)
-
#else /* !CONFIG_X86_32 */
extern u64 efi_call0(void *fp);
@@ -84,9 +82,6 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3,
efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
(u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
-extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
- u32 type);
-
#endif /* CONFIG_X86_32 */
extern int add_efi_memmap;
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 303a0e4..65ffd11 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -135,6 +135,7 @@ static void __init e820_print_type(u32 type)
printk(KERN_CONT "(usable)");
break;
case E820_RESERVED:
+ case E820_RESERVED_EFI:
printk(KERN_CONT "(reserved)");
break;
case E820_ACPI:
@@ -783,7 +784,7 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
/*
* Find the highest page frame number we have available
*/
-static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
+unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
{
int i;
unsigned long last_pfn = 0;
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index b946a9e..1bb0bf4 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -1049,6 +1049,14 @@ int hpet_rtc_timer_init(void)
}
EXPORT_SYMBOL_GPL(hpet_rtc_timer_init);
+static void hpet_disable_rtc_channel(void)
+{
+ unsigned long cfg;
+ cfg = hpet_readl(HPET_T1_CFG);
+ cfg &= ~HPET_TN_ENABLE;
+ hpet_writel(cfg, HPET_T1_CFG);
+}
+
/*
* The functions below are called from rtc driver.
* Return 0 if HPET is not being used.
@@ -1060,6 +1068,9 @@ int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
return 0;
hpet_rtc_flags &= ~bit_mask;
+ if (unlikely(!hpet_rtc_flags))
+ hpet_disable_rtc_channel();
+
return 1;
}
EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit);
@@ -1125,15 +1136,11 @@ EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq);
static void hpet_rtc_timer_reinit(void)
{
- unsigned int cfg, delta;
+ unsigned int delta;
int lost_ints = -1;
- if (unlikely(!hpet_rtc_flags)) {
- cfg = hpet_readl(HPET_T1_CFG);
- cfg &= ~HPET_TN_ENABLE;
- hpet_writel(cfg, HPET_T1_CFG);
- return;
- }
+ if (unlikely(!hpet_rtc_flags))
+ hpet_disable_rtc_channel();
if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
delta = hpet_default_delta;
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index cf0ef98..9a9e40f 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -691,6 +691,8 @@ early_param("reservelow", parse_reservelow);
void __init setup_arch(char **cmdline_p)
{
+ unsigned long end_pfn;
+
#ifdef CONFIG_X86_32
memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
visws_early_detect();
@@ -932,7 +934,24 @@ void __init setup_arch(char **cmdline_p)
init_gbpages();
/* max_pfn_mapped is updated here */
- max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
+ end_pfn = max_low_pfn;
+
+#ifdef CONFIG_X86_64
+ /*
+ * There may be regions after the last E820_RAM region that we
+ * want to include in the kernel direct mapping, such as
+ * EFI_RUNTIME_SERVICES_DATA.
+ */
+ if (efi_enabled) {
+ unsigned long efi_end;
+
+ efi_end = e820_end_pfn(MAXMEM>>PAGE_SHIFT, E820_RESERVED_EFI);
+ if (efi_end > max_low_pfn)
+ end_pfn = efi_end;
+ }
+#endif
+
+ max_low_pfn_mapped = init_memory_mapping(0, end_pfn << PAGE_SHIFT);
max_pfn_mapped = max_low_pfn_mapped;
#ifdef CONFIG_X86_64
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 37718f0..c9718a1 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -323,10 +323,13 @@ static void __init do_add_efi_memmap(void)
case EFI_UNUSABLE_MEMORY:
e820_type = E820_UNUSABLE;
break;
+ case EFI_RUNTIME_SERVICES_DATA:
+ e820_type = E820_RESERVED_EFI;
+ break;
default:
/*
* EFI_RESERVED_TYPE EFI_RUNTIME_SERVICES_CODE
- * EFI_RUNTIME_SERVICES_DATA EFI_MEMORY_MAPPED_IO
+ * EFI_MEMORY_MAPPED_IO
* EFI_MEMORY_MAPPED_IO_PORT_SPACE EFI_PAL_CODE
*/
e820_type = E820_RESERVED;
@@ -671,10 +674,21 @@ void __init efi_enter_virtual_mode(void)
end_pfn = PFN_UP(end);
if (end_pfn <= max_low_pfn_mapped
|| (end_pfn > (1UL << (32 - PAGE_SHIFT))
- && end_pfn <= max_pfn_mapped))
+ && end_pfn <= max_pfn_mapped)) {
va = __va(md->phys_addr);
- else
- va = efi_ioremap(md->phys_addr, size, md->type);
+
+ if (!(md->attribute & EFI_MEMORY_WB)) {
+ addr = (u64) (unsigned long)va;
+ npages = md->num_pages;
+ memrange_efi_to_native(&addr, &npages);
+ set_memory_uc(addr, npages);
+ }
+ } else {
+ if (!(md->attribute & EFI_MEMORY_WB))
+ va = ioremap_nocache(md->phys_addr, size);
+ else
+ va = ioremap_cache(md->phys_addr, size);
+ }
md->virt_addr = (u64) (unsigned long) va;
@@ -684,13 +698,6 @@ void __init efi_enter_virtual_mode(void)
continue;
}
- if (!(md->attribute & EFI_MEMORY_WB)) {
- addr = md->virt_addr;
- npages = md->num_pages;
- memrange_efi_to_native(&addr, &npages);
- set_memory_uc(addr, npages);
- }
-
systab = (u64) (unsigned long) efi_phys.systab;
if (md->phys_addr <= systab && systab < end) {
systab += md->virt_addr - md->phys_addr;
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index ac3aa54..312250c 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -80,20 +80,3 @@ void __init efi_call_phys_epilog(void)
local_irq_restore(efi_flags);
early_code_mapping_set_exec(0);
}
-
-void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
- u32 type)
-{
- unsigned long last_map_pfn;
-
- if (type == EFI_MEMORY_MAPPED_IO)
- return ioremap(phys_addr, size);
-
- last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
- if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) {
- unsigned long top = last_map_pfn << PAGE_SHIFT;
- efi_ioremap(top, size - (top - phys_addr), type);
- }
-
- return (void __iomem *)__va(phys_addr);
-}
next reply other threads:[~2011-12-09 20:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-09 20:29 Thomas Gleixner [this message]
2011-12-09 22:45 ` [GIT pull] x86 fixes for 3.2 Linus Torvalds
2011-12-10 20:56 ` Thomas Gleixner
-- strict thread matches above, loose matches on Subject: below --
2011-11-18 19:23 Thomas Gleixner
2011-11-19 0:16 ` Linus Torvalds
2011-11-19 10:57 ` Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.2.02.1112092128150.3020@ionos \
--to=tglx@linutronix.de \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.