From: Robert P. J. Day <rpjday@crashcourse.ca>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] powerpc: Various typo fixes under arch/powerpc/cpu/mpc83xx
Date: Wed, 16 Dec 2015 12:25:42 -0500 (EST) [thread overview]
Message-ID: <alpine.LFD.2.20.1512161223400.14753@localhost> (raw)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
---
one more bit of tidying in the area of u-boot i'm actually working
in at the moment.
diff --git a/arch/powerpc/cpu/mpc83xx/ecc.c b/arch/powerpc/cpu/mpc83xx/ecc.c
index 985a024..2a486e4 100644
--- a/arch/powerpc/cpu/mpc83xx/ecc.c
+++ b/arch/powerpc/cpu/mpc83xx/ecc.c
@@ -37,7 +37,7 @@ void ecc_print_status(void)
printf("Memory Error Disable:\n");
printf(" Multiple-Bit Error Disable: %d\n",
(ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
- printf(" Sinle-Bit Error Disable: %d\n",
+ printf(" Single-Bit Error Disable: %d\n",
(ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
printf(" Memory Select Error Disable: %d\n\n",
(ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
@@ -273,7 +273,7 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
count = simple_strtoul(argv[3], NULL, 16);
if ((u32) addr % 8) {
- printf("Address not alligned on "
+ printf("Address not aligned on "
"double word boundary\n");
return 1;
}
@@ -312,7 +312,7 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
count = simple_strtoul(argv[3], NULL, 16);
if ((u32) addr % 8) {
- printf("Address not alligned on "
+ printf("Address not aligned on "
"double word boundary\n");
return 1;
}
diff --git a/arch/powerpc/cpu/mpc83xx/pci.c b/arch/powerpc/cpu/mpc83xx/pci.c
index 30606fb..c7ea94c 100644
--- a/arch/powerpc/cpu/mpc83xx/pci.c
+++ b/arch/powerpc/cpu/mpc83xx/pci.c
@@ -123,7 +123,7 @@ void mpc83xx_pci_init(int num_buses, struct pci_region **reg)
int i;
if (num_buses > MAX_BUSES) {
- printf("%d PCI buses requsted, %d supported\n",
+ printf("%d PCI buses requested, %d supported\n",
num_buses, MAX_BUSES);
num_buses = MAX_BUSES;
diff --git a/arch/powerpc/cpu/mpc83xx/qe_io.c b/arch/powerpc/cpu/mpc83xx/qe_io.c
index 4fae19c..106704d 100644
--- a/arch/powerpc/cpu/mpc83xx/qe_io.c
+++ b/arch/powerpc/cpu/mpc83xx/qe_io.c
@@ -23,7 +23,7 @@ void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile qepio83xx_t *par_io = (volatile qepio83xx_t *)&im->qepio;
- /* Caculate pin location and 2bit mask and dir */
+ /* Calculate pin location and 2bit mask and dir */
pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
diff --git a/arch/powerpc/cpu/mpc83xx/spd_sdram.c b/arch/powerpc/cpu/mpc83xx/spd_sdram.c
index f62e1b7..21ab015 100644
--- a/arch/powerpc/cpu/mpc83xx/spd_sdram.c
+++ b/arch/powerpc/cpu/mpc83xx/spd_sdram.c
@@ -599,7 +599,7 @@ long int spd_sdram()
/*
* Empirically set ~MCAS-to-preamble override for DDR 2.
- * Your milage will vary.
+ * Your mileage will vary.
*/
cpo = 0;
if (spd.mem_type == SPD_MEMTYPE_DDR2) {
@@ -843,7 +843,7 @@ long int spd_sdram()
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
- * Use timebase counter, get_timer() is not availabe
+ * Use timebase counter, get_timer() is not available
*@this point of initialization yet.
*/
static __inline__ unsigned long get_tbms (void)
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index 1865626..2e91f51 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -170,7 +170,7 @@ int get_clocks(void)
tsec1_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_TSEC1CM value */
+ /* unknown SCCR_TSEC1CM value */
return -2;
}
#endif
@@ -191,7 +191,7 @@ int get_clocks(void)
usbdr_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_USBDRCM value */
+ /* unknown SCCR_USBDRCM value */
return -3;
}
#endif
@@ -212,7 +212,7 @@ int get_clocks(void)
tsec2_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_TSEC2CM value */
+ /* unknown SCCR_TSEC2CM value */
return -4;
}
#elif defined(CONFIG_MPC8313)
@@ -239,7 +239,7 @@ int get_clocks(void)
usbmph_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_USBMPHCM value */
+ /* unknown SCCR_USBMPHCM value */
return -5;
}
@@ -266,7 +266,7 @@ int get_clocks(void)
enc_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_ENCCM value */
+ /* unknown SCCR_ENCCM value */
return -7;
}
#endif
@@ -286,7 +286,7 @@ int get_clocks(void)
sdhc_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_SDHCCM value */
+ /* unknown SCCR_SDHCCM value */
return -8;
}
#endif
@@ -305,7 +305,7 @@ int get_clocks(void)
tdm_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_TDMCM value */
+ /* unknown SCCR_TDMCM value */
return -8;
}
#endif
@@ -345,7 +345,7 @@ int get_clocks(void)
pciexp1_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_PCIEXP1CM value */
+ /* unknown SCCR_PCIEXP1CM value */
return -9;
}
@@ -363,7 +363,7 @@ int get_clocks(void)
pciexp2_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_PCIEXP2CM value */
+ /* unknown SCCR_PCIEXP2CM value */
return -10;
}
#endif
@@ -383,7 +383,7 @@ int get_clocks(void)
sata_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_SATACM value */
+ /* unknown SCCR_SATA1CM value */
return -11;
}
#endif
@@ -413,7 +413,7 @@ int get_clocks(void)
corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) {
- /* corecnf_tab_index is too high, possibly worng value */
+ /* corecnf_tab_index is too high, possibly wrong value */
return -11;
}
switch (corecnf_tab[corecnf_tab_index].core_csb_ratio) {
@@ -435,7 +435,7 @@ int get_clocks(void)
core_clk = 3 * csb_clk;
break;
default:
- /* unkown core to csb ratio */
+ /* unknown core to csb ratio */
return -13;
}
diff --git a/arch/powerpc/cpu/mpc83xx/spl_minimal.c b/arch/powerpc/cpu/mpc83xx/spl_minimal.c
index 784f4ab..845861e 100644
--- a/arch/powerpc/cpu/mpc83xx/spl_minimal.c
+++ b/arch/powerpc/cpu/mpc83xx/spl_minimal.c
@@ -47,7 +47,7 @@ void cpu_init_f (volatile immap_t * im)
(CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT);
#endif
- /* Enable Time Base & Decrimenter (so we will have udelay()) */
+ /* Enable Time Base & Decrementer (so we will have udelay()) */
im->sysconf.spcr |= SPCR_TBEN;
/* DDR control driver register */
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================
next reply other threads:[~2015-12-16 17:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-16 17:25 Robert P. J. Day [this message]
2016-01-09 3:34 ` [U-Boot] powerpc: Various typo fixes under arch/powerpc/cpu/mpc83xx Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.2.20.1512161223400.14753@localhost \
--to=rpjday@crashcourse.ca \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.