From: Finn Thain <fthain@telegraphics.com.au>
To: "David S. Miller" <davem@davemloft.net>
Cc: linux-scsi@vger.kernel.org, linux-m68k@vger.kernel.org
Subject: [PATCH] mac_esp: fix PIO mode
Date: Mon, 23 Nov 2009 14:57:42 +1100 (EST) [thread overview]
Message-ID: <alpine.OSX.2.00.0911231452300.468@localhost> (raw)
The mac_esp PIO algorithm no longer works in 2.6.31 and crashes my Centris
660av. So here's a better one.
One of the SCSI drives I tested still doesn't like the PIO mode and fails
with "esp: esp0: Reconnect IRQ2 timeout" (the same drive works fine in
PDMA mode).
This failure happens when esp_reconnect_with_tag() tries to read in two
tag bytes but the chip only provides one (0x20). I don't know what causes
this. I decided not to waste any more time trying to fix it because the
best solution is to rip out the PIO mode altogether and use the DMA
engine.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
drivers/scsi/esp_scsi.c | 11 ++---
drivers/scsi/mac_esp.c | 97 ++++++++++++++++++++++++------------------------
2 files changed, 55 insertions(+), 53 deletions(-)
Index: linux-2.6.31/drivers/scsi/mac_esp.c
===================================================================
--- linux-2.6.31.orig/drivers/scsi/mac_esp.c 2009-11-23 12:52:45.000000000 +1100
+++ linux-2.6.31/drivers/scsi/mac_esp.c 2009-11-23 12:56:15.000000000 +1100
@@ -22,7 +22,6 @@
#include <asm/irq.h>
#include <asm/dma.h>
-
#include <asm/macints.h>
#include <asm/macintosh.h>
@@ -278,24 +277,27 @@ static void mac_esp_send_pdma_cmd(struct
* Programmed IO routines follow.
*/
-static inline int mac_esp_wait_for_fifo(struct esp *esp)
+static inline unsigned int mac_esp_wait_for_fifo(struct esp *esp)
{
int i = 500000;
do {
- if (esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES)
- return 0;
+ unsigned int fbytes = esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES;
+
+ if (fbytes)
+ return fbytes;
udelay(2);
} while (--i);
printk(KERN_ERR PFX "FIFO is empty (sreg %02x)\n",
esp_read8(ESP_STATUS));
- return 1;
+ return 0;
}
static inline int mac_esp_wait_for_intr(struct esp *esp)
{
+ struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
int i = 500000;
do {
@@ -307,6 +309,7 @@ static inline int mac_esp_wait_for_intr(
} while (--i);
printk(KERN_ERR PFX "IRQ timeout (sreg %02x)\n", esp->sreg);
+ mep->error = 1;
return 1;
}
@@ -346,11 +349,10 @@ static inline int mac_esp_wait_for_intr(
static void mac_esp_send_pio_cmd(struct esp *esp, u32 addr, u32 esp_count,
u32 dma_count, int write, u8 cmd)
{
- unsigned long flags;
struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
u8 *fifo = esp->regs + ESP_FDATA * 16;
- local_irq_save(flags);
+ disable_irq(esp->host->irq);
cmd &= ~ESP_CMD_DMA;
mep->error = 0;
@@ -358,11 +360,35 @@ static void mac_esp_send_pio_cmd(struct
if (write) {
scsi_esp_cmd(esp, cmd);
- if (!mac_esp_wait_for_intr(esp)) {
- if (mac_esp_wait_for_fifo(esp))
- esp_count = 0;
- } else {
- esp_count = 0;
+ while (1) {
+ unsigned int n;
+
+ n = mac_esp_wait_for_fifo(esp);
+ if (!n)
+ break;
+
+ if (n > esp_count)
+ n = esp_count;
+ esp_count -= n;
+
+ MAC_ESP_PIO_LOOP("%2@,%0@+", n);
+
+ if (!esp_count)
+ break;
+
+ if (mac_esp_wait_for_intr(esp))
+ break;
+
+ if (((esp->sreg & ESP_STAT_PMASK) != ESP_DIP) &&
+ ((esp->sreg & ESP_STAT_PMASK) != ESP_MIP))
+ break;
+
+ esp->ireg = esp_read8(ESP_INTRPT);
+ if ((esp->ireg & (ESP_INTR_DC | ESP_INTR_BSERV)) !=
+ ESP_INTR_BSERV)
+ break;
+
+ scsi_esp_cmd(esp, ESP_CMD_TI);
}
} else {
scsi_esp_cmd(esp, ESP_CMD_FLUSH);
@@ -373,47 +399,24 @@ static void mac_esp_send_pio_cmd(struct
MAC_ESP_PIO_LOOP("%0@+,%2@", esp_count);
scsi_esp_cmd(esp, cmd);
- }
-
- while (esp_count) {
- unsigned int n;
-
- if (mac_esp_wait_for_intr(esp)) {
- mep->error = 1;
- break;
- }
-
- if (esp->sreg & ESP_STAT_SPAM) {
- printk(KERN_ERR PFX "gross error\n");
- mep->error = 1;
- break;
- }
- n = esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES;
-
- if (write) {
- if (n > esp_count)
- n = esp_count;
- esp_count -= n;
-
- MAC_ESP_PIO_LOOP("%2@,%0@+", n);
+ while (esp_count) {
+ unsigned int n;
- if ((esp->sreg & ESP_STAT_PMASK) == ESP_STATP)
+ if (mac_esp_wait_for_intr(esp))
break;
- if (esp_count) {
- esp->ireg = esp_read8(ESP_INTRPT);
- if (esp->ireg & ESP_INTR_DC)
- break;
+ if (((esp->sreg & ESP_STAT_PMASK) != ESP_DOP) &&
+ ((esp->sreg & ESP_STAT_PMASK) != ESP_MOP))
+ break;
- scsi_esp_cmd(esp, ESP_CMD_TI);
- }
- } else {
esp->ireg = esp_read8(ESP_INTRPT);
- if (esp->ireg & ESP_INTR_DC)
+ if ((esp->ireg & (ESP_INTR_DC | ESP_INTR_BSERV)) !=
+ ESP_INTR_BSERV)
break;
- n = MAC_ESP_FIFO_SIZE - n;
+ n = MAC_ESP_FIFO_SIZE -
+ (esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES);
if (n > esp_count)
n = esp_count;
@@ -428,7 +431,7 @@ static void mac_esp_send_pio_cmd(struct
}
}
- local_irq_restore(flags);
+ enable_irq(esp->host->irq);
}
static int mac_esp_irq_pending(struct esp *esp)
Index: linux-2.6.31/drivers/scsi/esp_scsi.c
===================================================================
--- linux-2.6.31.orig/drivers/scsi/esp_scsi.c 2009-11-23 12:52:45.000000000 +1100
+++ linux-2.6.31/drivers/scsi/esp_scsi.c 2009-11-23 12:53:30.000000000 +1100
@@ -2405,12 +2405,6 @@ static int esp_slave_configure(struct sc
struct esp_target_data *tp = &esp->target[dev->id];
int goal_tags, queue_depth;
- if (esp->flags & ESP_FLAG_DISABLE_SYNC) {
- /* Bypass async domain validation */
- dev->ppr = 0;
- dev->sdtr = 0;
- }
-
goal_tags = 0;
if (dev->tagged_supported) {
@@ -2433,6 +2427,11 @@ static int esp_slave_configure(struct sc
}
tp->flags |= ESP_TGT_DISCONNECT;
+ if (esp->flags & ESP_FLAG_DISABLE_SYNC) {
+ dev->wdtr = spi_support_wide(dev->sdev_target) = 0;
+ dev->sdtr = spi_support_sync(dev->sdev_target) = 0;
+ }
+
if (!spi_initial_dv(dev->sdev_target))
spi_dv_device(dev);
next reply other threads:[~2009-11-23 3:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-23 3:57 Finn Thain [this message]
2009-12-02 23:40 ` [PATCH] mac_esp: fix PIO mode David Miller
2009-12-04 12:58 ` Finn Thain
2009-12-04 15:31 ` James Bottomley
2009-12-05 1:30 ` [PATCH] mac_esp: fix PIO mode, take 2 Finn Thain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.OSX.2.00.0911231452300.468@localhost \
--to=fthain@telegraphics.com.au \
--cc=davem@davemloft.net \
--cc=linux-m68k@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.