All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hao Li <hao.li@linux.dev>
To: "Vlastimil Babka (SUSE)" <vbabka@kernel.org>
Cc: Harry Yoo <harry@kernel.org>,
	Suren Baghdasaryan <surenb@google.com>,
	 Shakeel Butt <shakeel.butt@linux.dev>,
	Alexander Potapenko <glider@google.com>,
	 Marco Elver <elver@google.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	 Christoph Lameter <cl@gentwo.org>,
	David Rientjes <rientjes@google.com>,
	 Roman Gushchin <roman.gushchin@linux.dev>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	 cgroups@vger.kernel.org
Subject: Re: [PATCH v2 12/13] mm/slab: add cache_ and slab_needs_objcg() helpers
Date: Thu, 23 Jul 2026 17:25:59 +0800	[thread overview]
Message-ID: <amHbnLLrpOmwmusv@fedora> (raw)
In-Reply-To: <20260720-b4-objext_split-v2-12-2fa7c6f60dbe@kernel.org>

On Mon, Jul 20, 2026 at 04:16:26PM +0200, Vlastimil Babka (SUSE) wrote:
> Slabs of some caches never need the objcg part of struct slabobj_ext.
> Introduce helpers to query this for a cache or a slab.
> 
> Introduce SLAB_MAY_ACCOUNT flag that is currently only internal and only
> is_kmalloc_normal() caches don't have the flag.
> 
> For named caches we currently can't derive SLAB_MAY_ACCOUNT from
> SLAB_ACCOUNT because some caches might be created without SLAB_ACCOUNT
> and then used both with and without __GFP_ACCOUNT concurrently,
> allocating obj_ext arrays on demand. So just add the SLAB_MAY_ACCOUNT
> to all kmem caches, unless kmem accounting is disabled.
> 
> This can be improved later by finding out all caches used with
> __GFP_ACCOUNT, adding the SLAB_MAY_ACCOUNT flag to them explicitly and
> then ignoring __GFP_ACCOUNT for all other caches (with possible
> warning).
> 
> To make the evaluation of slab_needs_objcg() faster in the allocation
> and free fast paths, add a obj_exts_needs_objcg flag into slab itself.
> This optimization is only available on 64bit architectures where free
> bits are available for the flag.
> 
> Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
> ---
>  include/linux/slab.h |  3 +++
>  mm/kfence/core.c     |  3 +++
>  mm/slab.h            | 31 +++++++++++++++++++++++++++++--
>  mm/slab_common.c     | 25 ++++++++++++++++++++-----
>  mm/slub.c            |  6 +++++-
>  5 files changed, 60 insertions(+), 8 deletions(-)
> 
> diff --git a/include/linux/slab.h b/include/linux/slab.h
> index 3a14df50766a..f9132902c5a6 100644
> --- a/include/linux/slab.h
> +++ b/include/linux/slab.h
> @@ -45,6 +45,7 @@ enum _slab_flag_bits {
>  #endif
>  #ifdef CONFIG_MEMCG
>  	_SLAB_ACCOUNT,
> +	_SLAB_MAY_ACCOUNT,
>  #endif
>  #ifdef CONFIG_KASAN_GENERIC
>  	_SLAB_KASAN,
> @@ -204,8 +205,10 @@ enum _slab_flag_bits {
>   */
>  #ifdef CONFIG_MEMCG
>  # define SLAB_ACCOUNT		__SLAB_FLAG_BIT(_SLAB_ACCOUNT)
> +# define SLAB_MAY_ACCOUNT	__SLAB_FLAG_BIT(_SLAB_MAY_ACCOUNT)
>  #else
>  # define SLAB_ACCOUNT		__SLAB_FLAG_UNUSED
> +# define SLAB_MAY_ACCOUNT	__SLAB_FLAG_UNUSED
>  #endif
>  
>  #ifdef CONFIG_KASAN_GENERIC
> diff --git a/mm/kfence/core.c b/mm/kfence/core.c
> index 05b5482c8150..897ecf2594fb 100644
> --- a/mm/kfence/core.c
> +++ b/mm/kfence/core.c
> @@ -640,6 +640,9 @@ static unsigned long kfence_init_pool(void)
>  		struct slab *slab = page_slab(page);
>  		slab->obj_exts = (unsigned long)&kfence_metadata_init[i / 2 - 1].obj_exts |
>  				 MEMCG_DATA_OBJEXTS;
> +#ifdef CONFIG_64BIT
> +		slab->obj_exts_needs_objcg = 1;
> +#endif
>  #endif
>  	}
>  
> diff --git a/mm/slab.h b/mm/slab.h
> index c5f37a46434e..65b44902c06e 100644
> --- a/mm/slab.h
> +++ b/mm/slab.h
> @@ -81,10 +81,11 @@ struct freelist_counters {
>  #ifdef CONFIG_64BIT
>  					/*
>  					 * Some optimizations use free bits in 'counters' field
> -					 * to save memory. If these free bits are not available,
> -					 * such optimizations are disabled.
> +					 * to save memory or CPU. If these free bits are not
> +					 * available, such optimizations are disabled.
>  					 */
>  					unsigned obj_exts_in_object:1;
> +					unsigned obj_exts_needs_objcg:1;
>  #endif
>  				};
>  			};
> @@ -584,6 +585,32 @@ static inline bool slab_obj_ext_has_codetag(void)
>  }
>  #endif
>  
> +#ifdef CONFIG_MEMCG
> +static inline bool cache_needs_objcg(struct kmem_cache *cache)
> +{
> +	return (cache->flags & SLAB_MAY_ACCOUNT);
> +}
> +
> +static inline bool slab_needs_objcg(struct slab *slab)
> +{
> +#ifdef CONFIG_64BIT
> +	return slab->obj_exts_needs_objcg;
> +#else
> +	return cache_needs_objcg(slab->slab_cache);
> +#endif
> +}
> +#else
> +static inline bool cache_needs_objcg(struct kmem_cache *cache)
> +{
> +	return false;
> +}
> +
> +static inline bool slab_needs_objcg(struct slab *slab)
> +{
> +	return false;
> +}
> +#endif
> +
>  static inline size_t cache_obj_ext_size(struct kmem_cache *s)
>  {
>  	size_t sz = 0;
> diff --git a/mm/slab_common.c b/mm/slab_common.c
> index 03ecac12cd86..4e983e250338 100644
> --- a/mm/slab_common.c
> +++ b/mm/slab_common.c
> @@ -52,7 +52,7 @@ struct kmem_cache *kmem_cache;
>  		SLAB_OBJ_EXT_IN_OBJ)
>  
>  #define SLAB_MERGE_SAME (SLAB_RECLAIM_ACCOUNT | SLAB_CACHE_DMA | \
> -			 SLAB_CACHE_DMA32 | SLAB_ACCOUNT)
> +			 SLAB_CACHE_DMA32 | SLAB_ACCOUNT | SLAB_MAY_ACCOUNT)
>  
>  /*
>   * Merge control. If this is set then no merging of slab caches will occur.
> @@ -359,6 +359,13 @@ struct kmem_cache *__kmem_cache_create_args(const char *name,
>  		goto out_unlock;
>  	}
>  
> +	/*
> +	 * For now we assume any cache can be used with __GFP_ACCOUNT and thus
> +	 * may need to store objcg pointers for objects
> +	 */
> +	if (!mem_cgroup_kmem_disabled())
> +		flags |= SLAB_MAY_ACCOUNT;

if memcg itself is disabled via `cgroup_disable`, mem_cgroup_kmem_disabled()
still return false, so maybe we can use:

if (!mem_cgroup_disabled() && !mem_cgroup_kmem_disabled())
	flags |= SLAB_MAY_ACCOUNT;

> +
>  	/* Fail closed on bad usersize of useroffset values. */
>  	if (!IS_ENABLED(CONFIG_HARDENED_USERCOPY) ||
>  	    WARN_ON(!args->usersize && args->useroffset) ||
> @@ -984,11 +991,19 @@ new_kmalloc_cache(int idx, enum kmalloc_cache_type type)
>  #endif
>  
>  	/*
> -	 * If CONFIG_MEMCG is enabled, disable cache merging for
> -	 * KMALLOC_NORMAL caches.
> +	 * If memcg_kmem is enabled and this is a KMALLOC_NORMAL cache and  not
> +	 * aliased with any other type, make sure it's never merged with any other
> +	 * cache.
> +	 *
> +	 * In other cases the kmalloc cache may end up being used for a
> +	 * __GFP_ACCOUNT allocation so mark it as such
>  	 */
> -	if (IS_ENABLED(CONFIG_MEMCG) && (type == KMALLOC_NORMAL))
> -		flags |= SLAB_NO_MERGE;
> +	if (!mem_cgroup_kmem_disabled()) {

the same as above

Others look good to me.

Reviewed-by: Hao Li <hao.li@linux.dev>

> +		if (type == KMALLOC_NORMAL && KMALLOC_RECLAIM != KMALLOC_NORMAL)
> +			flags |= SLAB_NO_MERGE;
> +		else
> +			flags |= SLAB_MAY_ACCOUNT;
> +	}
>  
>  	if (minalign > ARCH_KMALLOC_MINALIGN) {
>  		aligned_size = ALIGN(aligned_size, minalign);
> diff --git a/mm/slub.c b/mm/slub.c
> index d78d3e50c877..30435e2509ea 100644
> --- a/mm/slub.c
> +++ b/mm/slub.c
> @@ -2557,7 +2557,7 @@ bool memcg_slab_post_charge(void *p, gfp_t flags)
>  	 * of slab_obj_exts being allocated from the same slab and thus the slab
>  	 * becoming effectively unfreeable.
>  	 */
> -	if (is_kmalloc_normal(s))
> +	if (!cache_needs_objcg(s))
>  		return true;
>  
>  	/* Ignore already charged objects. */
> @@ -3435,6 +3435,10 @@ static struct slab *allocate_slab(struct kmem_cache *s, gfp_t flags,
>  
>  	slab->objects = oo_objects(oo);
>  
> +#ifdef CONFIG_64BIT
> +	if (cache_needs_objcg(s))
> +		slab->obj_exts_needs_objcg = 1;
> +#endif
>  	slab->slab_cache = s;
>  
>  	kasan_poison_slab(slab);
> 
> -- 
> 2.55.0
> 

-- 
Thanks,
Hao

  reply	other threads:[~2026-07-23  9:26 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-20 14:16 [PATCH v2 00/13] mm/slab, alloc_tag: reduce obj_ext memory waste Vlastimil Babka (SUSE)
2026-07-20 14:16 ` [PATCH v2 01/13] mm/slab: skip kfence objects in allocation profiling Vlastimil Babka (SUSE)
2026-07-21  5:43   ` Harry Yoo
2026-07-21  9:20     ` Vlastimil Babka (SUSE)
2026-07-21 15:41       ` Harry Yoo
2026-07-22 12:47   ` Hao Li
2026-07-20 14:16 ` [PATCH v2 02/13] mm/slub: skip handle_failed_objexts_alloc() with profiling disabled Vlastimil Babka (SUSE)
2026-07-21  5:51   ` Harry Yoo
2026-07-21  9:23     ` Vlastimil Babka (SUSE)
2026-07-20 14:16 ` [PATCH v2 03/13] mm/slab: remove objs_per_slab() Vlastimil Babka (SUSE)
2026-07-21  5:53   ` Harry Yoo
2026-07-23 11:29   ` Hao Li
2026-07-20 14:16 ` [PATCH v2 04/13] mm: move struct slabobj_ext to mm/slab.h Vlastimil Babka (SUSE)
2026-07-21  5:55   ` Harry Yoo
2026-07-23 11:29   ` Hao Li
2026-07-20 14:16 ` [PATCH v2 05/13] mm/slab: make slab_obj_ext() determine object index Vlastimil Babka (SUSE)
2026-07-21  6:02   ` Harry Yoo
2026-07-23 11:30   ` Hao Li
2026-07-20 14:16 ` [PATCH v2 06/13] mm/slab: abstract slabobj_ext.objcg access Vlastimil Babka (SUSE)
2026-07-23 11:32   ` Hao Li
2026-07-23 17:23     ` Suren Baghdasaryan
2026-07-20 14:16 ` [PATCH v2 07/13] mm/slab: abstract slabobj_ext.ref access Vlastimil Babka (SUSE)
2026-07-23 11:32   ` Hao Li
2026-07-20 14:16 ` [PATCH v2 08/13] mm/slab: replace slab.stride with obj_exts_in_object Vlastimil Babka (SUSE)
2026-07-23 11:32   ` Hao Li
2026-07-20 14:16 ` [PATCH v2 09/13] mm/slab: change struct slabobj_ext to a union Vlastimil Babka (SUSE)
2026-07-23  3:05   ` Hao Li
2026-07-23  6:27     ` Harry Yoo
2026-07-23  9:56       ` Hao Li
2026-07-20 14:16 ` [PATCH v2 10/13] mm/slab: introduce slab_obj_ext_has_codetag() Vlastimil Babka (SUSE)
2026-07-20 14:16 ` [PATCH v2 11/13] mm/slab: reduce slabobj_ext memory with allocation profiling disabled Vlastimil Babka (SUSE)
2026-07-20 14:16 ` [PATCH v2 12/13] mm/slab: add cache_ and slab_needs_objcg() helpers Vlastimil Babka (SUSE)
2026-07-23  9:25   ` Hao Li [this message]
2026-07-23  9:30     ` Vlastimil Babka (SUSE)
2026-07-23 10:01       ` Hao Li
2026-07-20 14:16 ` [PATCH v2 13/13] mm/slab: stop allocating objcg pointers when unnecessary Vlastimil Babka (SUSE)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=amHbnLLrpOmwmusv@fedora \
    --to=hao.li@linux.dev \
    --cc=akpm@linux-foundation.org \
    --cc=cgroups@vger.kernel.org \
    --cc=cl@gentwo.org \
    --cc=elver@google.com \
    --cc=glider@google.com \
    --cc=harry@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=rientjes@google.com \
    --cc=roman.gushchin@linux.dev \
    --cc=shakeel.butt@linux.dev \
    --cc=surenb@google.com \
    --cc=vbabka@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.