Re: [PATCH v10 12/13] media: rppx1: ga: Add support for gamma out correction

[Sakari Ailus <sakari.ailus@iki.fi>]

On Tue, Jul 28, 2026 at 06:38:14PM +0300, Sakari Ailus wrote:
> Hejssan,
> 
> On Thu, Jun 11, 2026 at 10:41:47PM +0200, Niklas Söderlund wrote:
> > +/**
> > + * struct rppx1_ga_params - Gamma Out Correction configuration
> > + *
> > + * The Gamma Out Correction module is available on the Human Vision Output
> > + * Pipe (HV) and the Machine Vision Output Pipe (MV). Userspace selects
> > + * which pipe to operate by setting the @header.type field to
> > + * RPPX1_PARAMS_BLOCK_TYPE_GA_HV or RPPX1_PARAMS_BLOCK_TYPE_GA_MV.
> > + *
> > + * The module allows to apply a @gamma_y gamma correction curve to RGB data
> > + * represented as a table of 16 entries. The 16 input sampling points can be
> > + * equidistant or segmented using a logarithmic scale according to the value of
> > + * @mode.
> > + *
> > + * The gamma curve values are 12 bits on the HV output pipe and 24 bits on the
> > + * MV output pipe. Userspace is expected to provide the curve values with a
> > + * bit-depth matching the one of pipe in use.
> > + *
> > + * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_GA_HV or
> > + *	    type = RPPX1_PARAMS_BLOCK_TYPE_GA_MV)
> > + * @mode: gamma curve input segmentation mode (see rppx1_ga_seg_mode)
> > + * @gamma_y: gamma out curve y-axis values
> > + */
> > +struct rppx1_ga_params {
> > +	struct v4l2_isp_params_block_header header;
> > +	__u8 mode;
> 
> Please use reserved fields to avoid holes in structs!

The same appears to apply to the rest of the UAPI patches, too.

-- 
Sakari Ailus