Re: [PATCH v2 1/3] wait: Introduce non-irq variants of wait_event_lock_timeout

[Liviu Dudau <liviu.dudau@arm.com>]

On Thu, Jul 30, 2026 at 01:45:14PM +0200, Nicolas Frattaroli wrote:
> For locks that are never acquired in an interrupt context, the non-irq
> variants for spin_lock()/spin_unlock() are more efficient. However, so
> far, wait.h only provided wait_event_lock_irq_timeout and
> wait_event_interruptible_lock_irq_timeout, both of which use
> spin_lock_irq()/spin_unlock_irq().
> 
> Rectify this by adding new non-irq variants of these two macros.
> 
> Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>

Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>

Best regards,
Liviu

> ---
>  include/linux/wait.h | 84 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 84 insertions(+)
> 
> diff --git a/include/linux/wait.h b/include/linux/wait.h
> index dce055e6add3..cd9b989c120e 100644
> --- a/include/linux/wait.h
> +++ b/include/linux/wait.h
> @@ -1174,6 +1174,13 @@ do {										\
>  		      __ret = schedule_timeout(__ret);				\
>  		      spin_lock_irq(&lock));
>  
> +#define __wait_event_lock_timeout(wq_head, condition, lock, timeout, state)	\
> +	___wait_event(wq_head, ___wait_cond_timeout(condition),			\
> +		      state, 0, timeout,					\
> +		      spin_unlock(&lock);					\
> +		      __ret = schedule_timeout(__ret);				\
> +		      spin_lock(&lock))
> +
>  /**
>   * wait_event_interruptible_lock_irq_timeout - sleep until a condition gets
>   *		true or a timeout elapses. The condition is checked under
> @@ -1219,6 +1226,83 @@ do {										\
>  	__ret;									\
>  })
>  
> +/**
> + * wait_event_interruptible_lock_timeout - sleep until a condition gets
> + *		true or a timeout elapses. The condition is checked under
> + *		the lock with IRQs enabled. This is expected to be called
> + *		with the lock taken.
> + * @wq_head: the waitqueue to wait on
> + * @condition: a C expression for the event to wait for
> + * @lock: a spinlock_t that has been locked with spin_lock(), which will be
> + *	  released before schedule() and reacquired afterwards.
> + * @timeout: timeout, in jiffies
> + *
> + * The process is put to sleep (TASK_INTERRUPTIBLE) until the
> + * @condition evaluates to true or signal is received. The @condition is
> + * checked each time the waitqueue @wq_head is woken up.
> + *
> + * wake_up() has to be called after changing any variable that could
> + * change the result of the wait condition.
> + *
> + * This is supposed to be called while holding the lock. The lock is
> + * dropped before going to sleep using spin_unlock() and is reacquired
> + * using spin_lock() afterwards, but without globally disabling IRQs.
> + * This is in contrast to wait_event_interruptible_lock_irq_timeout(),
> + * which uses the spin_lock_irq() and spin_unlock_irq() functions instead.
> + *
> + * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it
> + * was interrupted by a signal, and the remaining jiffies otherwise
> + * if the condition evaluated to true before the timeout elapsed.
> + */
> +#define wait_event_interruptible_lock_timeout(wq_head, condition, lock,		\
> +					      timeout)				\
> +({										\
> +	long __ret = timeout;							\
> +	if (!___wait_cond_timeout(condition))					\
> +		__ret = __wait_event_lock_timeout(				\
> +					wq_head, condition, lock, timeout,	\
> +					TASK_INTERRUPTIBLE);			\
> +	__ret;									\
> +})
> +
> +/**
> + * wait_event_lock_timeout - sleep until a condition gets true or a timeout
> + *		elapses. The condition is checked under the lock with IRQs
> + *		enabled. This is expected to be called with the lock taken.
> + * @wq_head: the waitqueue to wait on
> + * @condition: a C expression for the event to wait for
> + * @lock: a spinlock_t that has been locked with spin_lock(), which will be
> + *	  released before schedule() and reacquired afterwards.
> + * @timeout: timeout, in jiffies
> + *
> + * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
> + * @condition evaluates to true or signal is received. The @condition is
> + * checked each time the waitqueue @wq_head is woken up.
> + *
> + * wake_up() has to be called after changing any variable that could
> + * change the result of the wait condition.
> + *
> + * This is supposed to be called while holding the lock. The lock is
> + * dropped before going to sleep using spin_unlock() and is reacquired
> + * using spin_lock() afterwards, but without globally disabling IRQs.
> + * This is in contrast to wait_event_lock_irq_timeout(), which uses the
> + * spin_lock_irq() and spin_unlock_irq() functions instead. Compared to
> + * wait_event_interruptible_lock_timeout(), it uses the %TASK_UNINTERRUPTIBLE
> + * instead of allowing the task to be interrupted.
> + *
> + * The function returns 0 if the @timeout elapsed, or the remaining jiffies
> + * otherwise if the condition evaluated to true before the timeout elapsed.
> + */
> +#define wait_event_lock_timeout(wq_head, condition, lock, timeout)		\
> +({										\
> +	long __ret = timeout;							\
> +	if (!___wait_cond_timeout(condition))					\
> +		__ret = __wait_event_lock_timeout(				\
> +					wq_head, condition, lock, timeout,	\
> +					TASK_UNINTERRUPTIBLE);			\
> +	__ret;									\
> +})
> +
>  /*
>   * Waitqueues which are removed from the waitqueue_head at wakeup time
>   */
> 
> -- 
> 2.55.0
> 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯