All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: nuno.sa@analog.com
Cc: dmaengine@vger.kernel.org, linux-iio@vger.kernel.org,
	Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Jonathan Cameron <jic23@kernel.org>,
	David Lechner <dlechner@baylibre.com>,
	Andy Shevchenko <andy@kernel.org>
Subject: Re: [PATCH 5/9] dmaengine: stm32-dma3: Use bus width capability helpers
Date: Thu, 30 Jul 2026 14:26:02 -0500	[thread overview]
Message-ID: <amulSmk87kV8hHzW@SMW015318> (raw)
In-Reply-To: <20260730-dmaengine-support-wider-dma-masks-v1-5-3732f1f9d9ca@analog.com>

On Thu, Jul 30, 2026 at 03:23:12PM +0100, Nuno Sá via B4 Relay wrote:
> [You don't often get email from devnull+nuno.sa.analog.com@kernel.org. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> From: Nuno Sá <nuno.sa@analog.com>
>
> Advertise the controller-wide bus width capabilities through the new
> dma_set_src_bus_widths() and dma_set_dst_bus_widths() helpers.
>
> Also update the per-channel capability callback to clear unsupported
> widths through the dma_slave_caps helpers so the bitmap and
> transitional legacy fields stay in sync.
>
> Signed-off-by: Nuno Sá <nuno.sa@analog.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  drivers/dma/stm32/stm32-dma3.c | 32 ++++++++++++++++++++------------
>  1 file changed, 20 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/dma/stm32/stm32-dma3.c b/drivers/dma/stm32/stm32-dma3.c
> index 4724e7fa0008..b0365a5b341d 100644
> --- a/drivers/dma/stm32/stm32-dma3.c
> +++ b/drivers/dma/stm32/stm32-dma3.c
> @@ -1469,14 +1469,14 @@ static void stm32_dma3_caps(struct dma_chan *c, struct dma_slave_caps *caps)
>
>         if (!chan->fifo_size) {
>                 caps->max_burst = 0;
> -               caps->src_addr_widths &= ~BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
> -               caps->dst_addr_widths &= ~BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
> +               dma_slave_caps_clear_src_width(caps, DMA_SLAVE_BUSWIDTH_8_BYTES);
> +               dma_slave_caps_clear_dst_width(caps, DMA_SLAVE_BUSWIDTH_8_BYTES);
>         } else {
>                 /* Burst transfer should not exceed half of the fifo size */
>                 caps->max_burst = chan->max_burst;
>                 if (caps->max_burst < DMA_SLAVE_BUSWIDTH_8_BYTES) {
> -                       caps->src_addr_widths &= ~BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
> -                       caps->dst_addr_widths &= ~BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
> +                       dma_slave_caps_clear_src_width(caps, DMA_SLAVE_BUSWIDTH_8_BYTES);
> +                       dma_slave_caps_clear_dst_width(caps, DMA_SLAVE_BUSWIDTH_8_BYTES);
>                 }
>         }
>  }
> @@ -1737,6 +1737,12 @@ static int stm32_dma3_probe(struct platform_device *pdev)
>         u32 master_ports, chan_reserved, i, verr;
>         u64 hwcfgr;
>         int ret;
> +       enum dma_slave_buswidth stm32_dma3_buswidths[] = {
> +               DMA_SLAVE_BUSWIDTH_1_BYTE,
> +               DMA_SLAVE_BUSWIDTH_2_BYTES,
> +               DMA_SLAVE_BUSWIDTH_4_BYTES,
> +               DMA_SLAVE_BUSWIDTH_8_BYTES,
> +       };
>
>         ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
>         if (!ddata)
> @@ -1775,14 +1781,16 @@ static int stm32_dma3_probe(struct platform_device *pdev)
>          * channel, and can only access address at even boundaries, multiple of the buswidth.
>          */
>         dma_dev->copy_align = DMAENGINE_ALIGN_8_BYTES;
> -       dma_dev->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
> -                                  BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
> -                                  BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
> -                                  BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
> -       dma_dev->dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
> -                                  BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
> -                                  BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
> -                                  BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
> +       ret = dma_set_src_bus_widths(dma_dev, stm32_dma3_buswidths,
> +                                    ARRAY_SIZE(stm32_dma3_buswidths));
> +       if (ret)
> +               return ret;
> +
> +       ret = dma_set_dst_bus_widths(dma_dev, stm32_dma3_buswidths,
> +                                    ARRAY_SIZE(stm32_dma3_buswidths));
> +       if (ret)
> +               return ret;
> +
>         dma_dev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV) | BIT(DMA_MEM_TO_MEM);
>
>         dma_dev->descriptor_reuse = true;
>
> --
> 2.55.0
>
>

  parent reply	other threads:[~2026-07-30 19:26 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-30 14:23 [PATCH 0/9] dmaengine: Support bus widths of 32 bytes and above Nuno Sá via B4 Relay
2026-07-30 14:23 ` Nuno Sá
2026-07-30 14:23 ` [PATCH 1/9] " Nuno Sá via B4 Relay
2026-07-30 14:23   ` Nuno Sá
2026-07-30 14:38   ` sashiko-bot
2026-07-30 19:16   ` Frank Li
2026-07-30 14:23 ` [PATCH 2/9] dmaengine: dma-axi-dmac: Use bus width capability helpers Nuno Sá via B4 Relay
2026-07-30 14:23   ` Nuno Sá
2026-07-30 14:39   ` sashiko-bot
2026-07-30 19:23   ` Frank Li
2026-07-30 14:23 ` [PATCH 3/9] dmaengine: dw-axi-dmac: " Nuno Sá via B4 Relay
2026-07-30 14:23   ` Nuno Sá
2026-07-30 14:36   ` sashiko-bot
2026-07-30 19:24   ` Frank Li
2026-07-30 14:23 ` [PATCH 4/9] dmaengine: qcom: gpi: " Nuno Sá via B4 Relay
2026-07-30 14:23   ` Nuno Sá
2026-07-30 14:43   ` sashiko-bot
2026-07-30 19:25   ` Frank Li
2026-07-30 14:23 ` [PATCH 5/9] dmaengine: stm32-dma3: " Nuno Sá via B4 Relay
2026-07-30 14:23   ` Nuno Sá
2026-07-30 14:35   ` sashiko-bot
2026-07-30 19:26   ` Frank Li [this message]
2026-07-30 14:23 ` [PATCH 6/9] iio: buffer-dmaengine: Use dma_slave_caps bus width accessors Nuno Sá via B4 Relay
2026-07-30 14:23   ` Nuno Sá
2026-07-30 19:27   ` Frank Li
2026-07-30 14:23 ` [PATCH 7/9] ALSA: pcm_dmaengine: Use dma_slave_caps bus width helpers Nuno Sá via B4 Relay
2026-07-30 14:23   ` Nuno Sá
2026-07-30 19:30   ` Frank Li
2026-07-30 14:23 ` [PATCH 8/9] spi: dw: " Nuno Sá via B4 Relay
2026-07-30 14:23   ` Nuno Sá
2026-07-30 14:43   ` sashiko-bot
2026-07-30 19:31   ` Frank Li
2026-07-30 14:23 ` [PATCH 9/9] dmaengine: Drop legacy bus width fields from dma_slave_caps Nuno Sá via B4 Relay
2026-07-30 14:23   ` Nuno Sá
2026-07-30 19:34   ` Frank Li
2026-07-30 19:05 ` [PATCH 0/9] dmaengine: Support bus widths of 32 bytes and above Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=amulSmk87kV8hHzW@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@kernel.org \
    --cc=andy@kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.