From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] Input: atkbd - factor out atkbd_recreate_device() helper
Date: Wed, 5 Aug 2026 22:52:24 -0700 [thread overview]
Message-ID: <anQg6dtUwQ1Fx4hM@google.com> (raw)
The sysfs attribute setters atkbd_set_extra() and atkbd_set_set() contain
identical logic for unregistering the old input device, allocating a new
one, updating state, and registering the new device.
Factor out this common logic into an atkbd_recreate_device() helper to
reduce code duplication.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/keyboard/atkbd.c | 109 ++++++++++++++-------------------
1 file changed, 46 insertions(+), 63 deletions(-)
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 5736f4bc5a50..3ff7e9dea9fe 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -1444,6 +1444,47 @@ static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t
return -EINTR;
}
+static int atkbd_recreate_device(struct atkbd *atkbd,
+ unsigned char new_set, bool new_extra)
+{
+ struct input_dev *new_dev, *old_dev = atkbd->dev;
+ bool old_extra = atkbd->extra;
+ u8 old_set = atkbd->set;
+ int err;
+
+ /*
+ * Since device's properties will change we need to unregister
+ * the old device. But allocate and register the new one first
+ * to make sure we have it.
+ */
+ new_dev = input_allocate_device();
+ if (!new_dev)
+ return -ENOMEM;
+
+ atkbd->dev = new_dev;
+ atkbd->set = atkbd_select_set(atkbd, new_set, new_extra);
+ atkbd_reset_state(atkbd);
+ atkbd_activate(atkbd);
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+
+ err = input_register_device(atkbd->dev);
+ if (err) {
+ input_free_device(new_dev);
+
+ atkbd->dev = old_dev;
+ atkbd->set = atkbd_select_set(atkbd, old_set, old_extra);
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+
+ return err;
+ }
+
+ input_unregister_device(old_dev);
+
+ return 0;
+}
+
static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf)
{
return sprintf(buf, "%d\n", atkbd->extra ? 1 : 0);
@@ -1451,11 +1492,8 @@ static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf)
static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count)
{
- struct input_dev *old_dev, *new_dev;
unsigned int value;
int err;
- bool old_extra;
- u8 old_set;
if (!atkbd->write)
return -EIO;
@@ -1468,38 +1506,9 @@ static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t coun
return -EINVAL;
if (atkbd->extra != value) {
- /*
- * Since device's properties will change we need to
- * unregister old device. But allocate and register
- * new one first to make sure we have it.
- */
- old_dev = atkbd->dev;
- old_extra = atkbd->extra;
- old_set = atkbd->set;
-
- new_dev = input_allocate_device();
- if (!new_dev)
- return -ENOMEM;
-
- atkbd->dev = new_dev;
- atkbd->set = atkbd_select_set(atkbd, atkbd->set, value);
- atkbd_reset_state(atkbd);
- atkbd_activate(atkbd);
- atkbd_set_keycode_table(atkbd);
- atkbd_set_device_attrs(atkbd);
-
- err = input_register_device(atkbd->dev);
- if (err) {
- input_free_device(new_dev);
-
- atkbd->dev = old_dev;
- atkbd->set = atkbd_select_set(atkbd, old_set, old_extra);
- atkbd_set_keycode_table(atkbd);
- atkbd_set_device_attrs(atkbd);
-
+ err = atkbd_recreate_device(atkbd, atkbd->set, value);
+ if (err)
return err;
- }
- input_unregister_device(old_dev);
}
return count;
@@ -1586,11 +1595,8 @@ static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf)
static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
{
- struct input_dev *old_dev, *new_dev;
unsigned int value;
int err;
- u8 old_set;
- bool old_extra;
if (!atkbd->write)
return -EIO;
@@ -1603,34 +1609,11 @@ static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
return -EINVAL;
if (atkbd->set != value) {
- old_dev = atkbd->dev;
- old_extra = atkbd->extra;
- old_set = atkbd->set;
-
- new_dev = input_allocate_device();
- if (!new_dev)
- return -ENOMEM;
-
- atkbd->dev = new_dev;
- atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra);
- atkbd_reset_state(atkbd);
- atkbd_activate(atkbd);
- atkbd_set_keycode_table(atkbd);
- atkbd_set_device_attrs(atkbd);
-
- err = input_register_device(atkbd->dev);
- if (err) {
- input_free_device(new_dev);
-
- atkbd->dev = old_dev;
- atkbd->set = atkbd_select_set(atkbd, old_set, old_extra);
- atkbd_set_keycode_table(atkbd);
- atkbd_set_device_attrs(atkbd);
-
+ err = atkbd_recreate_device(atkbd, value, atkbd->extra);
+ if (err)
return err;
- }
- input_unregister_device(old_dev);
}
+
return count;
}
--
2.55.0.679.g6767b8d81c-goog
--
Dmitry
next reply other threads:[~2026-08-06 5:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-06 5:52 Dmitry Torokhov [this message]
2026-08-06 6:01 ` [PATCH] Input: atkbd - factor out atkbd_recreate_device() helper sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=anQg6dtUwQ1Fx4hM@google.com \
--to=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.