All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kiryl Shutsemau <kas@kernel.org>
To: Usama Arif <usama.arif@linux.dev>, Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	baohua@kernel.org,  baolin.wang@linux.alibaba.com,
	david@kernel.org, dev.jain@arm.com, lance.yang@linux.dev,
	 liam@infradead.org, linux-kernel@vger.kernel.org,
	linux-mm@kvack.org, ljs@kernel.org,  nico.pache@linux.dev,
	ryan.roberts@arm.com, ziy@nvidia.com, nphamcs@gmail.com,
	 hannes@cmpxchg.org, riel@surriel.com, shakeel.butt@linux.dev,
	kernel-team@meta.com,  stable@vger.kernel.org
Subject: Re: [PATCH] mm/huge_memory: transfer the pmd dirty bit to the folio on zap
Date: Wed, 19 Aug 2026 15:31:40 +0100	[thread overview]
Message-ID: <aoWw_iKEDLjKL2jr@thinkstation> (raw)
In-Reply-To: <20260819101222.3732660-1-usama.arif@linux.dev>

On Wed, Aug 19, 2026 at 03:12:22AM -0700, Usama Arif wrote:
> zap_huge_pmd_folio() propagates the pmd young bit to the folio for the
> file case, but not the dirty bit.  The pte path does propagate it, in
> zap_present_folio_ptes() and so does the pmd split path, in
> __split_huge_pmd_locked().
> 
> For most file mappings the omission is harmless, because writing to a
> shared file mapping goes through page_mkwrite(), which dirties the
> folio.  tmpfs is different: it has no page_mkwrite(), and
> vma_wants_writenotify() is false for it, so a *read* fault on a
> MAP_SHARED tmpfs mapping installs a writable pmd via do_read_fault().
> do_read_fault() does not call fault_dirty_shared_page(), so subsequent
> stores through that mapping set only the hardware dirty bit in the pmd
> and never call folio_mark_dirty().
>
> A shmem folio allocated by a fault
> is marked uptodate but not dirty (see the clear: block in
> shmem_get_folio_gfp()), so PG_dirty is never set at all.
> 
> Unmapping such a folio - munmap(), or exit_mmap() when the process dies
> - then loses the only record that it was written, because zap_huge_pmd()
> drops the pmd without transferring the dirty bit.  Reclaim afterwards
> sees a clean shmem folio: the whole swap-out block in
> shrink_folio_list() is inside "if (folio_test_dirty(folio))", so
> pageout() is skipped and the folio falls into __remove_mapping().
> There, folio_is_file_lru() is false for a swapbacked folio, so no shadow
> entry is created and __filemap_remove_folio(folio, NULL) simply empties
> the i_pages slot.  The data is freed without ever being written to swap,
> and the next fault on that index returns a freshly zeroed folio.
> 
> This is silent data loss for any process that keeps state in a
> MAP_SHARED tmpfs segment across an unmap - for example a cache handed
> from one process generation to the next through /dev/shm.  It requires
> the folio to be PMD-mapped, so it only shows up once shmem THP is
> enabled (which is what we did in Meta fleet and started noticing crashes);
> with THP off the pte path transfers the dirty bit correctly.
> It also only becomes visible when swap is enabled, because with no swap
> device shmem folios (which are on the anon LRU) are not scanned by
> reclaim at all, so the clean folio is never dropped.
> 
> Reproduced on x86_64 with a tmpfs mounted huge=within_size: read-fault a
> 2MB-backed region, write a known pattern through the resulting mapping,
> munmap, force reclaim of the cgroup, then re-map and read back.  Without
> this patch the region reads back as zeros and vmstat shows zswpout 0 -
> the data was discarded rather than swapped.  With this patch the region
> reads back correctly and the pages are swapped out as expected.  With
> huge=never, or when the first touch is a write, the test passes either
> way.

+Hugh.

Oopsie.

I'm confused why it took a decade to discover the bug...
Maybe read ahead of write for shmem is too rare, I donno.

> 
> Fixes: 800d8c63b2e9 ("shmem: add huge pages support")

This would be more precise: b5072380eb61 ("thp: support file pages in zap_huge_pmd()")

Reviewed-by: Kiryl Shutsemau <kas@kernel.org>

> Cc: <stable@vger.kernel.org>
> Signed-off-by: Usama Arif <usama.arif@linux.dev>
> ---
>  mm/huge_memory.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index ced400f72d43a..afbb5974bd225 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -2449,6 +2449,8 @@ static void zap_huge_pmd_folio(struct mm_struct *mm, struct vm_area_struct *vma,
>  		add_mm_counter(mm, mm_counter_file(folio),
>  			       -HPAGE_PMD_NR);
>  
> +		if (is_present && pmd_dirty(pmdval))
> +			folio_mark_dirty(folio);

Unrelated to your patch, but noticed while looking at it: we drop the rmap
here under the pmd lock, while the TLB flush is deferred to
tlb_finish_mmu(). The pte path handles this with
tlb_delay_rmap()/force_flush (5df397dec7c4), but there's no pmd equivalent:
tlb_flush_rmap_batch() only knows folio_remove_rmap_ptes(), and
zap_huge_pmd() uses tlb_remove_page_size(), which takes no delay_rmap.

Doesn't matter for shmem, but xfs & friends do get PMD-order folios, and
do_set_pmd() makes the pmd dirty+writable once page_mkwrite() has run. So
folio_mkclean() can clean the folio while another CPU still stores through a
stale TLB entry -- silently lost write, no PG_dirty left behind.

I think we need to fix this too.

Wanna give it a try?

>  		if (is_present && pmd_young(pmdval) &&
>  		    likely(vma_has_recency(vma)))
>  			folio_mark_accessed(folio);
> -- 
> 2.53.0-Meta
> 

-- 
  Kiryl Shutsemau / Kirill A. Shutemov


  parent reply	other threads:[~2026-08-19 14:31 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-19 10:12 [PATCH] mm/huge_memory: transfer the pmd dirty bit to the folio on zap Usama Arif
2026-08-19 14:13 ` David Hildenbrand (Arm)
2026-08-19 14:13   ` David Hildenbrand (Arm)
2026-08-19 14:31 ` Kiryl Shutsemau [this message]
2026-08-19 16:17   ` Lance Yang
2026-08-19 16:32     ` Usama Arif
2026-08-19 16:35   ` Pedro Falcato
2026-08-19 15:10 ` Lance Yang
2026-08-19 15:31 ` Zi Yan
2026-08-19 16:09 ` Lorenzo Stoakes (ARM)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aoWw_iKEDLjKL2jr@thinkstation \
    --to=kas@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=baohua@kernel.org \
    --cc=baolin.wang@linux.alibaba.com \
    --cc=david@kernel.org \
    --cc=dev.jain@arm.com \
    --cc=hannes@cmpxchg.org \
    --cc=hughd@google.com \
    --cc=kernel-team@meta.com \
    --cc=lance.yang@linux.dev \
    --cc=liam@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=ljs@kernel.org \
    --cc=nico.pache@linux.dev \
    --cc=nphamcs@gmail.com \
    --cc=riel@surriel.com \
    --cc=ryan.roberts@arm.com \
    --cc=shakeel.butt@linux.dev \
    --cc=stable@vger.kernel.org \
    --cc=usama.arif@linux.dev \
    --cc=ziy@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.