From: Frank Li <Frank.li@oss.nxp.com>
To: Rosen Penev <rosenp@gmail.com>
Cc: dmaengine@vger.kernel.org,
Ludovic Desroches <ludovic.desroches@microchip.com>,
Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>,
"moderated list:MICROCHIP AT91 DMA DRIVERS"
<linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCHv3] dmaengine: at_hdmac: use devm APIs in probe()
Date: Thu, 20 Aug 2026 10:12:28 -0500 [thread overview]
Message-ID: <aocZXKrXxENFihZW@SMW015318> (raw)
In-Reply-To: <20260817201200.10952-1-rosenp@gmail.com>
On Mon, Aug 17, 2026 at 01:12:00PM -0700, Rosen Penev wrote:
> Convert resource allocation and setup in probe() to use devm-managed APIs.
> Simplify the error handling path and removes explicit cleanup code.
>
> Assisted-by: opencode:big-pickle
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> v3: fix subject and description
> v2: remove list_del
> drivers/dma/at_hdmac.c | 50 ++++++++++--------------------------------
> 1 file changed, 11 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
> index 971f8bc9ec48..49a85ac66e83 100644
> --- a/drivers/dma/at_hdmac.c
> +++ b/drivers/dma/at_hdmac.c
> @@ -1986,40 +1986,34 @@ static int __init at_dma_probe(struct platform_device *pdev)
> atdma->dma_device.cap_mask = plat_dat->cap_mask;
> atdma->all_chan_mask = (1 << plat_dat->nr_channels) - 1;
>
> - atdma->clk = devm_clk_get(&pdev->dev, "dma_clk");
> + atdma->clk = devm_clk_get_enabled(&pdev->dev, "dma_clk");
> if (IS_ERR(atdma->clk))
> return PTR_ERR(atdma->clk);
>
> - err = clk_prepare_enable(atdma->clk);
> - if (err)
> - return err;
> -
> /* force dma off, just in case */
> at_dma_off(atdma);
>
> - err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma);
> + err = devm_request_irq(&pdev->dev, irq, at_dma_interrupt, 0, "at_hdmac", atdma);
> if (err)
> - goto err_irq;
> + return err;
>
> platform_set_drvdata(pdev, atdma);
>
> /* create a pool of consistent memory blocks for hardware descriptors */
> - atdma->lli_pool = dma_pool_create("at_hdmac_lli_pool",
> + atdma->lli_pool = dmam_pool_create("at_hdmac_lli_pool",
> &pdev->dev, sizeof(struct at_lli),
> 4 /* word alignment */, 0);
> if (!atdma->lli_pool) {
> dev_err(&pdev->dev, "Unable to allocate DMA LLI descriptor pool\n");
> - err = -ENOMEM;
> - goto err_desc_pool_create;
> + return -ENOMEM;
> }
>
> /* create a pool of consistent memory blocks for memset blocks */
> - atdma->memset_pool = dma_pool_create("at_hdmac_memset_pool",
> + atdma->memset_pool = dmam_pool_create("at_hdmac_memset_pool",
> &pdev->dev, sizeof(int), 4, 0);
> if (!atdma->memset_pool) {
> dev_err(&pdev->dev, "No memory for memset dma pool\n");
> - err = -ENOMEM;
> - goto err_memset_pool_create;
> + return -ENOMEM;
> }
>
> /* clear any pending interrupt */
> @@ -2086,10 +2080,10 @@ static int __init at_dma_probe(struct platform_device *pdev)
> dma_has_cap(DMA_SLAVE, atdma->dma_device.cap_mask) ? "slave " : "",
> plat_dat->nr_channels);
>
> - err = dma_async_device_register(&atdma->dma_device);
> + err = dmaenginem_async_device_register(&atdma->dma_device);
> if (err) {
> dev_err(&pdev->dev, "Unable to register: %d.\n", err);
> - goto err_dma_async_device_register;
> + return err;
> }
>
> /*
> @@ -2098,27 +2092,15 @@ static int __init at_dma_probe(struct platform_device *pdev)
> * dma_request_channel().
> */
> if (pdev->dev.of_node) {
> - err = of_dma_controller_register(pdev->dev.of_node,
> + err = devm_of_dma_controller_register(&pdev->dev, pdev->dev.of_node,
> at_dma_xlate, atdma);
> if (err) {
> dev_err(&pdev->dev, "could not register of_dma_controller\n");
> - goto err_of_dma_controller_register;
> + return err;
> }
> }
>
> return 0;
> -
> -err_of_dma_controller_register:
> - dma_async_device_unregister(&atdma->dma_device);
> -err_dma_async_device_register:
> - dma_pool_destroy(atdma->memset_pool);
> -err_memset_pool_create:
> - dma_pool_destroy(atdma->lli_pool);
> -err_desc_pool_create:
> - free_irq(platform_get_irq(pdev, 0), atdma);
> -err_irq:
> - clk_disable_unprepare(atdma->clk);
> - return err;
> }
>
> static void at_dma_remove(struct platform_device *pdev)
> @@ -2127,22 +2109,12 @@ static void at_dma_remove(struct platform_device *pdev)
> struct dma_chan *chan, *_chan;
>
> at_dma_off(atdma);
> - if (pdev->dev.of_node)
> - of_dma_controller_free(pdev->dev.of_node);
> - dma_async_device_unregister(&atdma->dma_device);
> -
> - dma_pool_destroy(atdma->memset_pool);
> - dma_pool_destroy(atdma->lli_pool);
> - free_irq(platform_get_irq(pdev, 0), atdma);
>
> list_for_each_entry_safe(chan, _chan, &atdma->dma_device.channels,
> device_node) {
> /* Disable interrupts */
> atc_disable_chan_irq(atdma, chan->chan_id);
> - list_del(&chan->device_node);
> }
> -
> - clk_disable_unprepare(atdma->clk);
> }
>
> static void at_dma_shutdown(struct platform_device *pdev)
> --
> 2.55.0
>
prev parent reply other threads:[~2026-08-20 15:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-17 20:12 [PATCHv3] dmaengine: at_hdmac: use devm APIs in probe() Rosen Penev
2026-08-17 20:25 ` sashiko-bot
2026-08-17 21:37 ` Frank Li
2026-08-20 13:32 ` [PATCH v3] " Markus Elfring
2026-08-20 15:12 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aocZXKrXxENFihZW@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=rosenp@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.