From: Francesco Dolcini <francesco.dolcini@toradex.com>
To: Mehmet Fide <mehmet.fide@gmail.com>
Cc: Tom Rini <trini@konsulko.com>,
u-boot@lists.u-boot-project.org,
Mehmet Fide <mehmet.fide@screeningeagle.com>
Subject: Re: [PATCH] doc: board: toradex: colibri_vf: flash u-boot-nand.imx, not the plain image
Date: Mon, 31 Aug 2026 09:38:11 +0200 [thread overview]
Message-ID: <apUvY1wvxcGf2OnY@francesco-nb> (raw)
In-Reply-To: <20260828112335.40695-1-mehmet.fide@gmail.com>
On Fri, Aug 28, 2026 at 01:23:35PM +0200, Mehmet Fide wrote:
> From: Mehmet Fide <mehmet.fide@screeningeagle.com>
>
> The BootROM reads the IVT at offset 0x400 of the NAND boot device
> (VFxxx Reference Manual rev. 8, table 7-51), but the page tells the
> reader to write the plain u-boot.imx, which carries the IVT at offset
> 0. The BootROM refuses such an image and silently falls back to the
> serial downloader, verified on a Colibri VF50 V1.2A. Point the NAND
> flashing section and the eBoot flashloader section at the
> u-boot-nand.imx make target, which prefixes the image with the 1 KiB
> of padding the BootROM expects; that is the file the eBoot flow was
> verified with on a Colibri VF61 V1.2B.
>
> Fixes: 26e89c626827 ("doc: board: toradex: add the Colibri VF50/VF61 page")
> Signed-off-by: Mehmet Fide <mehmet.fide@screeningeagle.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
prev parent reply other threads:[~2026-08-31 7:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-28 11:23 [PATCH] doc: board: toradex: colibri_vf: flash u-boot-nand.imx, not the plain image Mehmet Fide
2026-08-31 7:38 ` Francesco Dolcini [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=apUvY1wvxcGf2OnY@francesco-nb \
--to=francesco.dolcini@toradex.com \
--cc=mehmet.fide@gmail.com \
--cc=mehmet.fide@screeningeagle.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.u-boot-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.