From: Matthew Brost <matthew.brost@intel.com>
To: Dave Airlie <airlied@gmail.com>, Simona Vetter <simona.vetter@ffwll.ch>
Cc: "Jani Nikula" <jani.nikula@linux.intel.com>,
"Joonas Lahtinen" <joonas.lahtinen@linux.intel.com>,
"Tvrtko Ursulin" <tursulin@ursulin.net>,
"Rodrigo Vivi" <rodrigo.vivi@intel.com>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>,
"Matthew Brost" <matthew.brost@intel.com>,
"Thomas Hellström" <thomas.hellstrom@linux.intel.com>,
"Oded Gabbay" <ogabbay@kernel.org>,
dri-devel@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
intel-xe@lists.freedesktop.org, dim-tools@lists.freedesktop.org
Subject: [PULL] drm-xe-next
Date: Mon, 31 Aug 2026 17:26:06 -0700 [thread overview]
Message-ID: <apYbnrklyk6nNO7Q@gsse-cloud1.jf.intel.com> (raw)
Hi Dave and Sima,
Here goes our first drm-xe-next pull towards 7.4.
Big things we have are: VF migration for multi-queue, parallel page
fault handling, various RAS features, and structured SIGID error
logging.
Matt
drm-xe-next-2026-08-31-1:
Cross-subsystem Changes:
- MAINTAINERS: Add entries for drm_ras (Rodrigo)
- alerts and controller enabling modifications (Heikki)
Core Changes:
- Introduce cold reset recovery method (Mallesh)
- Add drm_ras netlink error event support (Riana)
- Introduce error threshold to drm_ras (Raag)
Driver Changes:
- Remove sysfs entry on idr_alloc failure in xe_oa_add_config_ioctl (Lu)
- match argument naming with PCODE_DATAx (Grzelak)
- fix stale GGTT mappings on unmap (Tangudu)
- Introduce error threshold to drm_ras (Raag)
- Add debugfs knob to control GPGPU preemption granularity (Varun)
- fix vecs config for powergating info (Ashutosh)
- Read mailbox phase bit from hardware (Anoop)
- alerts and controller enabling modifications (Heikki)
- Use int instead of u32 for mailbox status (Umesh)
- Reject page faults from non-fault-mode scratch VMs (Arvind)
- Add CCS to the powergating info print (Balasubramani)
- Do not apply WA 14025883347 to media 3503 (Daniele)
- don't WARN on kernel job timeout when device already wedged (Nitin)
- handle exec queue teardown after hot-unplug (Nitin)
- Allow debugging PCI errors (Raag)
- Add structured SIGID error logging infrastructure (Wajdeczko, Rodrigo)
- Enable package and vram temperatures for CRI (Karthik)
- Introduce cold reset recovery method (Mallesh)
- fix error message in xe_migrate_sanity_test (Dan Carpenter)
- Add drm_ras netlink error event support (Riana)
- Fix a bug in pc_adjust_freq_bounds() (Vinay)
- Fix xe_device_probe() failure (Raag)
- Page fault cleanups (Wajdeczko)
- OA memory fixes (Linmao)
- document sentinel and make CTX_TIMESTAMP read TOCTOU-safe (Gajendra)
- Move has_drm_ras check to drm_ras layer (Raag)
- add termination on resume (Daniele)
- Add _locked variants of some config functions (Wajdeczko)
- Order ring writes before ring tail updates (Brost)
- Parallel page fault handling (Brost)
- handle CRI+ power interval encoding (Karthik)
- allocate UM queues in a separate UC BO (Jia)
- Fix boot-time ras error processing (Raag)
- VF migration for multi-queue (Niranjana)
- Apply RCS/CCS yield policy to SR-IOV VFs (Marcin)
- Fix memory leak in exec_queue_set_hang_replay_state (Winiarski)
- Use IBC v3 on PTL (Vinay)
- Reduce MERT debug log spam (Lukasz, Piotr)
- Validate sysctrl response (Raag)
- Changes for Xe3p_HPM media (Ashutosh)
The following changes since commit cee9395acd8043be0644b25c34bfa86623f2b935:
Linux 7.3-rc1 (2026-08-30 13:34:40 -0700)
are available in the Git repository at:
https://gitlab.freedesktop.org/drm/xe/kernel.git tags/drm-xe-next-2026-08-31-1
for you to fetch changes up to cc467969646b9778c947bec1383fb3cdaada14d5:
Merge drm/drm-next into drm-xe-next (2026-08-31 15:42:28 -0700)
----------------------------------------------------------------
Cross-subsystem Changes:
- MAINTAINERS: Add entries for drm_ras (Rodrigo)
- alerts and controller enabling modifications (Heikki)
Core Changes:
- Introduce cold reset recovery method (Mallesh)
- Add drm_ras netlink error event support (Riana)
- Introduce error threshold to drm_ras (Raag)
Driver Changes:
- Remove sysfs entry on idr_alloc failure in xe_oa_add_config_ioctl (Lu)
- match argument naming with PCODE_DATAx (Grzelak)
- fix stale GGTT mappings on unmap (Tangudu)
- Introduce error threshold to drm_ras (Raag)
- Add debugfs knob to control GPGPU preemption granularity (Varun)
- fix vecs config for powergating info (Ashutosh)
- Read mailbox phase bit from hardware (Anoop)
- alerts and controller enabling modifications (Heikki)
- Use int instead of u32 for mailbox status (Umesh)
- Reject page faults from non-fault-mode scratch VMs (Arvind)
- Add CCS to the powergating info print (Balasubramani)
- Do not apply WA 14025883347 to media 3503 (Daniele)
- don't WARN on kernel job timeout when device already wedged (Nitin)
- handle exec queue teardown after hot-unplug (Nitin)
- Allow debugging PCI errors (Raag)
- Add structured SIGID error logging infrastructure (Wajdeczko, Rodrigo)
- Enable package and vram temperatures for CRI (Karthik)
- Introduce cold reset recovery method (Mallesh)
- fix error message in xe_migrate_sanity_test (Dan Carpenter)
- Add drm_ras netlink error event support (Riana)
- Fix a bug in pc_adjust_freq_bounds() (Vinay)
- Fix xe_device_probe() failure (Raag)
- Page fault cleanups (Wajdeczko)
- OA memory fixes (Linmao)
- document sentinel and make CTX_TIMESTAMP read TOCTOU-safe (Gajendra)
- Move has_drm_ras check to drm_ras layer (Raag)
- add termination on resume (Daniele)
- Add _locked variants of some config functions (Wajdeczko)
- Order ring writes before ring tail updates (Brost)
- Parallel page fault handling (Brost)
- handle CRI+ power interval encoding (Karthik)
- allocate UM queues in a separate UC BO (Jia)
- Fix boot-time ras error processing (Raag)
- VF migration for multi-queue (Niranjana)
- Apply RCS/CCS yield policy to SR-IOV VFs (Marcin)
- Fix memory leak in exec_queue_set_hang_replay_state (Winiarski)
- Use IBC v3 on PTL (Vinay)
- Reduce MERT debug log spam (Lukasz, Piotr)
- Validate sysctrl response (Raag)
- Changes for Xe3p_HPM media (Ashutosh)
----------------------------------------------------------------
Anoop Vijay (1):
drm/xe/sysctrl: Read mailbox phase bit from hardware
Arvind Yadav (1):
drm/xe: Reject page faults from non-fault-mode scratch VMs
Ashutosh Dixit (3):
drm/xe/mcr: Take vcs1/vecs1 into account for first media slice
drm/xe/oa: Extend OAM unit hwe assignment for new dGfx
drm/xe/xe_gt_idle: fix vecs config for powergating info
Balasubramani Vivekanandan (1):
drm/xe/xe_gt_idle: Add CCS to the powergating info print
Dan Carpenter (1):
drm/xe: tests: fix error message in xe_migrate_sanity_test()
Daniele Ceraolo Spurio (2):
drm/xe/pxp: add termination on resume
drm/xe: Do not apply WA 14025883347 to media 3503
Gajendra Uttamchand (1):
drm/xe/lrc: document sentinel and make CTX_TIMESTAMP read TOCTOU-safe
Heikki Krogerus (3):
i2c: designware: Global register definitions
drm/xe/i2c: Fix the interrupt handling
drm/xe/i2c: Keep the i2c controller always enabled
Jia Yao (3):
drm/xe/guc_ads: allocate UM queues in a separate BO
drm/xe/guc_ads: allocate UM queues in VRAM on dGFX
drm/xe/guc_ads: use uncached mapping for UM queue BO
Karthik Poosa (2):
drm/xe/hwmon: handle CRI+ power interval encoding
drm/xe/hwmon: Enable package and vram temperatures for CRI
Linmao Li (2):
drm/xe/oa: Fix sync entry leak on OA config emit failure
drm/xe/oa: Check managed mutex initialization errors
Lu Yao (1):
drm/xe/oa: Remove sysfs entry on idr_alloc failure in xe_oa_add_config_ioctl()
Mallesh Koujalagi (5):
drm: Add DRM_WEDGE_RECOVERY_COLD_RESET recovery method
drm/doc: Document DRM_WEDGE_RECOVERY_COLD_RESET recovery method
drm/xe: Handle PUNIT errors by requesting cold-reset recovery
drm/xe/ras: Use fault-inject to trigger cold-reset wedge
drm/xe/log: Add structured SIGID error logging infrastructure
Marcin Bernatowicz (1):
drm/xe/uc: Apply RCS/CCS yield policy to SR-IOV VFs
Matthew Brost (15):
Merge drm/drm-next into drm-xe-next
drm/xe: Fine grained page fault locking
drm/xe: Allow prefetch-only VM bind IOCTLs to use VM read lock
drm/xe: Thread prefetch of SVM ranges
drm/xe: Use a single page-fault queue with multiple workers
drm/xe: Add num_pf_work modparam
drm/xe: Engine class and instance into a u8
drm/xe: Track pagefault worker runtime
drm/xe: Chain page faults via queue-resident cache to avoid fault storms
drm/xe: Add pagefault chaining stats
drm/xe: Add debugfs pagefault_info
drm/xe: batch CT pagefault acks with periodic flush
drm/xe: Track parallel page fault activity in GT stats
drm/xe: Order ring writes before ring tail updates
Merge drm/drm-next into drm-xe-next
Michal Wajdeczko (37):
drm/xe/pf: Add _locked variant of the GGTT bulk config function
drm/xe/pf: Add _locked variant of the contexts bulk config function
drm/xe/pf: Add _locked variant of the doorbells bulk config function
drm/xe: Use guard(spinlock_irqsave) in pagefault handler
drm/xe: Remove redundant full pagefault queue check
drm/xe: Introduce xe_any helpers
drm/xe/log: Introduce structured component/location identifiers
drm/xe/log: Add component/location decorations to dmesg
drm/xe/log: Add SIGID log helpers for severity
drm/xe/log: Add SIGID log helpers for location
drm/xe/log: Add SIGID log helpers for location & severity
drm/xe/log: Add SIGID log helpers for components
drm/xe/log: Add SIGID log helpers for component & severity
drm/xe/log: Add SIGID log helpers for errno-only
drm/xe/log: Index all SIGID printk messages
drm/xe/log: Add hardware error signatures
drm/xe/log: Extend components list with hardware items
drm/xe/ras: Check RAS and LOG component definitions
drm/xe/kunit: Setup driver data in the test device
drm/xe/tests: Add Kunit tests for xe_log
drm/xe/tests: Add kunit tests for xe_any
drm/xe: Report 'probe blocked' status using SIGID
drm/xe: Report all probe errors using SIGID
drm/xe/survivability: Report 'boot status' using SIGID
drm/xe/survivability: Report sysfs failure in one place
drm/xe/survivability: Report 'boot status' on sysfs failure
drm/xe/survivability: Report 'Boot Mode enabled' status using SIGID
drm/xe/survivability: Report 'Runtime Mode enabled' status using SIGID
drm/xe: Report 'device wedged' errors using SIGID
drm/xe/pcode: Report 'Mailbox failed' error using SIGID
drm/xe/pcode: Report 'timeout, retrying' error using SIGID
drm/xe/pcode: Report 'initialization timedout' error using SIGID
drm/xe/guc: Report 'GuC mmio' errors using SIGID
drm/xe/gt: Report 'reset failed' errors using SIGID
drm/xe/gt: Report 'Fault response' pagefault error using SIGID
drm/xe/gt: Report 'Queue full' pagefault error using SIGID
drm/xe/pci: Report 'cannot re-enable' error using SIGID
Michał Grzelak (1):
drm/xe/pcode: match argument naming with PCODE_DATAx
Michał Winiarski (2):
drm/xe: Fix memory leak in exec_queue_set_hang_replay_state()
drm/xe: Reject duplicated properties for EXEC_QUEUE_SET_PROPERTY
Niranjana Vishwanathapura (4):
drm/xe: split VF pause into prepare and revert phases
drm/xe/multi_queue: handle CGP_SYNC wait timeout during VF recovery
drm/xe/multi_queue: track and recover lost CGP updates across VF migration
drm/xe/multi_queue: replay dynamic CGP updates lost during VF migration
Nitin Gote (3):
drm/xe/guc: rework exec queue teardown PM/unplug handling
drm/xe: remove EXEC_QUEUE_FLAG_PERMANENT
drm/xe: don't WARN on kernel job timeout when device already wedged
Piotr Piórkowski (2):
drm/xe: Add dbg_ratelimited printk wrappers
drm/xe/mert: Rate limit VF LMTT fault debug log
Raag Jadav (10):
drm/xe/ras: Validate sysctrl response
drm/xe/ras: Fix boot-time ras error processing
drm/xe/drm_ras: Move has_drm_ras check to drm_ras layer
drm/xe: Fix xe_device_probe() failure
drm/xe/pci_error: Allow debugging PCI errors
drm/ras: Cancel and free message on get counter failure
drm/ras: Introduce error threshold
drm/xe/ras: Add support for error threshold
drm/xe/drm_ras: Wire up error threshold callbacks
drm/xe/sysctrl: Reuse xe_sysctrl_create_command()
Riana Tauro (2):
drm/drm_ras: Add drm_ras netlink error event
drm/xe/xe_ras: Report correctable/uncorrectable error events to userspace
Rodrigo Vivi (1):
MAINTAINERS: Add entries for drm_ras
Tangudu Tilak Tirumalesh (3):
drm/xe/ggtt: fault on unmapped GGTT for multi-queue platforms
drm/xe/tlb_inval: add xe_tlb_inval_ggtt_full() GGTT invalidation helper
drm/xe/ggtt: invalidate engine GGTT TLBs for multi-queue GTs
Umesh Nerlige Ramappa (1):
drm/xe/pcode: Use int instead of u32 for mailbox status
Varun Gupta (1):
drm/xe: Add debugfs knob to control GPGPU preemption granularity
Vinay Belgaumkar (3):
drm/xe: Use IBC v3 on PTL
drm/xe: Add debugfs for IA/GT bias
drm/xe: Fix a bug in pc_adjust_freq_bounds()
Documentation/gpu/drm-ras.rst | 39 ++
Documentation/gpu/drm-uapi.rst | 93 +++-
Documentation/gpu/xe/index.rst | 1 +
Documentation/gpu/xe/xe_sigid.rst | 14 +
Documentation/netlink/specs/drm_ras.yaml | 80 +++
MAINTAINERS | 13 +
drivers/gpu/drm/drm_drv.c | 2 +
drivers/gpu/drm/drm_ras.c | 278 +++++++++-
drivers/gpu/drm/drm_ras_nl.c | 33 ++
drivers/gpu/drm/drm_ras_nl.h | 8 +
drivers/gpu/drm/xe/Makefile | 1 +
drivers/gpu/drm/xe/abi/guc_actions_slpc_abi.h | 1 +
drivers/gpu/drm/xe/abi/xe_log_abi.h | 199 +++++++
drivers/gpu/drm/xe/abi/xe_sigid_abi.h | 172 +++++++
drivers/gpu/drm/xe/display/xe_display_pcode.c | 4 +-
drivers/gpu/drm/xe/regs/xe_gt_regs.h | 6 +
drivers/gpu/drm/xe/regs/xe_lrc_layout.h | 2 +
drivers/gpu/drm/xe/tests/Makefile | 1 +
drivers/gpu/drm/xe/tests/xe_any_kunit.c | 213 ++++++++
drivers/gpu/drm/xe/tests/xe_kunit_helpers.c | 4 +
drivers/gpu/drm/xe/tests/xe_log_kunit.c | 553 ++++++++++++++++++++
drivers/gpu/drm/xe/xe_any.h | 137 +++++
drivers/gpu/drm/xe/xe_debugfs.c | 15 +
drivers/gpu/drm/xe/xe_debugfs.h | 2 +
drivers/gpu/drm/xe/xe_defaults.h | 1 +
drivers/gpu/drm/xe/xe_device.c | 30 +-
drivers/gpu/drm/xe/xe_device_types.h | 23 +-
drivers/gpu/drm/xe/xe_drm_ras.c | 65 +++
drivers/gpu/drm/xe/xe_drm_ras.h | 3 +
drivers/gpu/drm/xe/xe_exec_queue.c | 6 +-
drivers/gpu/drm/xe/xe_exec_queue_types.h | 21 +-
drivers/gpu/drm/xe/xe_ggtt.c | 74 ++-
drivers/gpu/drm/xe/xe_gsc.c | 3 +-
drivers/gpu/drm/xe/xe_gt.c | 13 +-
drivers/gpu/drm/xe/xe_gt.h | 13 +
drivers/gpu/drm/xe/xe_gt_debugfs.c | 146 ++++++
drivers/gpu/drm/xe/xe_gt_idle.c | 45 +-
drivers/gpu/drm/xe/xe_gt_printk.h | 3 +
drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c | 191 ++++---
drivers/gpu/drm/xe/xe_gt_sriov_pf_config.h | 6 +
drivers/gpu/drm/xe/xe_gt_sriov_printk.h | 3 +
drivers/gpu/drm/xe/xe_gt_stats.c | 7 +
drivers/gpu/drm/xe/xe_gt_stats_types.h | 22 +
drivers/gpu/drm/xe/xe_gt_types.h | 29 ++
drivers/gpu/drm/xe/xe_guc.c | 18 +-
drivers/gpu/drm/xe/xe_guc_ct.c | 95 +++-
drivers/gpu/drm/xe/xe_guc_ct.h | 38 +-
drivers/gpu/drm/xe/xe_guc_exec_queue_types.h | 32 +-
drivers/gpu/drm/xe/xe_guc_pagefault.c | 39 +-
drivers/gpu/drm/xe/xe_guc_pc.c | 15 +-
drivers/gpu/drm/xe/xe_guc_submit.c | 267 +++++++---
drivers/gpu/drm/xe/xe_guc_tlb_inval.c | 29 ++
drivers/gpu/drm/xe/xe_guc_types.h | 6 +
drivers/gpu/drm/xe/xe_hwmon.c | 88 ++--
drivers/gpu/drm/xe/xe_i2c.c | 22 +-
drivers/gpu/drm/xe/xe_i2c.h | 1 +
drivers/gpu/drm/xe/xe_log.c | 235 +++++++++
drivers/gpu/drm/xe/xe_log.h | 194 +++++++
drivers/gpu/drm/xe/xe_lrc.c | 33 ++
drivers/gpu/drm/xe/xe_mert.c | 2 +-
drivers/gpu/drm/xe/xe_migrate.c | 2 -
drivers/gpu/drm/xe/xe_module.c | 4 +
drivers/gpu/drm/xe/xe_module.h | 1 +
drivers/gpu/drm/xe/xe_oa.c | 13 +-
drivers/gpu/drm/xe/xe_pagefault.c | 716 +++++++++++++++++++++-----
drivers/gpu/drm/xe/xe_pagefault.h | 74 +++
drivers/gpu/drm/xe/xe_pagefault_types.h | 114 +++-
drivers/gpu/drm/xe/xe_pci.c | 32 +-
drivers/gpu/drm/xe/xe_pci_error.c | 13 +-
drivers/gpu/drm/xe/xe_pcode.c | 27 +-
drivers/gpu/drm/xe/xe_pcode.h | 2 +-
drivers/gpu/drm/xe/xe_pm.c | 5 +
drivers/gpu/drm/xe/xe_printk.h | 3 +
drivers/gpu/drm/xe/xe_pt.c | 6 +
drivers/gpu/drm/xe/xe_pxp_submit.c | 5 +-
drivers/gpu/drm/xe/xe_ras.c | 236 ++++++++-
drivers/gpu/drm/xe/xe_ras.h | 2 +
drivers/gpu/drm/xe/xe_ras_types.h | 50 ++
drivers/gpu/drm/xe/xe_sriov_printk.h | 3 +
drivers/gpu/drm/xe/xe_sriov_vf_ccs.c | 1 -
drivers/gpu/drm/xe/xe_survivability_mode.c | 85 +--
drivers/gpu/drm/xe/xe_svm.c | 146 ++++--
drivers/gpu/drm/xe/xe_svm.h | 59 ++-
drivers/gpu/drm/xe/xe_sysctrl_event.c | 28 +-
drivers/gpu/drm/xe/xe_sysctrl_mailbox_types.h | 4 +
drivers/gpu/drm/xe/xe_tile_printk.h | 3 +
drivers/gpu/drm/xe/xe_tile_sriov_printk.h | 3 +
drivers/gpu/drm/xe/xe_tlb_inval.c | 42 +-
drivers/gpu/drm/xe/xe_tlb_inval.h | 1 +
drivers/gpu/drm/xe/xe_tlb_inval_types.h | 10 +
drivers/gpu/drm/xe/xe_userptr.c | 19 +-
drivers/gpu/drm/xe/xe_vm.c | 301 ++++++++---
drivers/gpu/drm/xe/xe_vm_types.h | 42 +-
drivers/gpu/drm/xe/xe_wa.c | 4 +-
include/drm/drm_device.h | 1 +
include/drm/drm_ras.h | 34 ++
include/uapi/drm/drm_ras.h | 18 +
97 files changed, 5126 insertions(+), 672 deletions(-)
create mode 100644 Documentation/gpu/xe/xe_sigid.rst
create mode 100644 drivers/gpu/drm/xe/abi/xe_log_abi.h
create mode 100644 drivers/gpu/drm/xe/abi/xe_sigid_abi.h
create mode 100644 drivers/gpu/drm/xe/tests/xe_any_kunit.c
create mode 100644 drivers/gpu/drm/xe/tests/xe_log_kunit.c
create mode 100644 drivers/gpu/drm/xe/xe_any.h
create mode 100644 drivers/gpu/drm/xe/xe_log.c
create mode 100644 drivers/gpu/drm/xe/xe_log.h
next reply other threads:[~2026-09-01 0:26 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-01 0:26 Matthew Brost [this message]
-- strict thread matches above, loose matches on Subject: below --
2026-10-01 20:57 [PULL] drm-xe-next Matthew Brost
2026-10-01 12:57 Rodrigo Vivi
2026-10-01 21:05 ` Rodrigo Vivi
2026-09-18 19:45 Matthew Brost
2026-07-30 16:06 Rodrigo Vivi
2026-07-03 18:13 Rodrigo Vivi
2026-05-28 12:57 Thomas Hellstrom
2026-05-21 18:38 Thomas Hellstrom
2026-05-14 13:20 Thomas Hellstrom
2026-04-30 13:00 Thomas Hellstrom
2026-03-27 3:24 Matthew Brost
2026-03-26 4:44 Matthew Brost
2026-03-12 14:57 Matthew Brost
2026-03-02 22:40 Matthew Brost
2026-01-15 16:16 Rodrigo Vivi
2025-12-30 9:58 Thomas Hellstrom
2025-12-19 22:41 Rodrigo Vivi
2025-11-14 10:49 Thomas Hellstrom
2025-11-17 20:56 ` Dave Airlie
2025-11-18 8:34 ` Thomas Hellström
2025-11-05 16:53 Thomas Hellstrom
2025-10-28 11:16 Thomas Hellstrom
2025-10-31 17:46 ` Simona Vetter
2025-10-20 8:31 Thomas Hellstrom
2025-10-24 11:26 ` Simona Vetter
2025-09-19 14:53 Lucas De Marchi
2025-08-29 22:00 Lucas De Marchi
2025-07-15 18:21 Rodrigo Vivi
2025-07-10 22:16 Rodrigo Vivi
2025-07-11 9:12 ` Simona Vetter
2025-07-11 9:25 ` Simona Vetter
2025-06-18 20:05 Rodrigo Vivi
2025-05-08 16:01 Thomas Hellstrom
2025-04-28 16:03 Thomas Hellstrom
2025-04-28 14:27 Thomas Hellstrom
2025-04-28 15:40 ` Thomas Hellström
2025-04-17 10:22 Thomas Hellstrom
2025-03-07 8:02 Lucas De Marchi
2025-03-07 14:51 ` Lucas De Marchi
2025-03-07 19:04 ` Lucas De Marchi
2025-02-24 18:50 Lucas De Marchi
2025-01-10 14:54 Rodrigo Vivi
2025-01-07 19:01 Rodrigo Vivi
2024-12-11 23:27 Rodrigo Vivi
2024-10-31 11:50 Thomas Hellstrom
2024-10-24 17:52 Thomas Hellstrom
2024-10-24 19:22 ` Matthew Brost
2024-10-25 7:30 ` Thomas Hellström
2024-10-25 9:34 ` Jani Nikula
2024-10-25 10:45 ` Thomas Hellström
2024-10-25 22:26 ` Matthew Brost
2024-10-17 9:32 Thomas Hellstrom
2024-10-10 9:56 Thomas Hellstrom
2024-09-06 2:29 Lucas De Marchi
2024-08-28 19:18 Lucas De Marchi
2024-08-22 20:55 Lucas De Marchi
2024-08-27 10:51 ` Daniel Vetter
2024-07-30 22:39 Lucas De Marchi
2024-07-02 19:02 Rodrigo Vivi
2024-07-05 8:18 ` Daniel Vetter
2024-06-26 22:32 Rodrigo Vivi
2024-06-06 21:43 Rodrigo Vivi
2024-04-23 12:54 Thomas Hellstrom
2024-02-26 3:21 Lucas De Marchi
2024-02-26 9:58 ` Daniel Vetter
2024-02-26 10:46 ` Daniel Stone
2024-02-26 14:16 ` Lucas De Marchi
2023-12-15 22:28 Rodrigo Vivi
2023-12-17 12:35 ` Oded Gabbay
2023-12-17 12:35 ` Oded Gabbay
2023-12-18 12:09 ` Oded Gabbay
2023-12-18 12:09 ` Oded Gabbay
2023-12-18 14:27 ` Oded Gabbay
2023-12-18 14:27 ` Oded Gabbay
2023-12-19 7:17 ` Ohad Sharabi
2023-12-19 9:15 ` Dani Liberman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=apYbnrklyk6nNO7Q@gsse-cloud1.jf.intel.com \
--to=matthew.brost@intel.com \
--cc=airlied@gmail.com \
--cc=dim-tools@lists.freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=joonas.lahtinen@linux.intel.com \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=ogabbay@kernel.org \
--cc=rodrigo.vivi@intel.com \
--cc=simona.vetter@ffwll.ch \
--cc=thomas.hellstrom@linux.intel.com \
--cc=tursulin@ursulin.net \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.