Re: [PATCH 6/6] arm64: dts: qcom: Add initial support for Nord Ride Embedded board

[Shawn Guo <shengchao.guo@oss.qualcomm.com>]

On Thu, Sep 03, 2026 at 09:56:16AM +0200, Konrad Dybcio wrote:
> On 9/3/26 9:40 AM, Shawn Guo wrote:
> > On Wed, Sep 02, 2026 at 04:00:52PM +0200, Konrad Dybcio wrote:
> >> On 8/31/26 5:21 AM, Shawn Guo wrote:
> >>> From: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
> >>>
> >>> Add the initial device tree for the Nord Ride Embedded board, the
> >>> non-SCMI variant of the SA8797P automotive Ride board.
> 
> [...]
> 
> > Since we agreed that a bit comment is useful [1], I guess you are saying
> > the "satellite (CD90-73961-1)" part shouldn't be there. I will get the
> > comment aligned with nord-rrd.dts.
> 
> Ah I forgot I said that :)
> 
> [...]
> 
> >>> +		vreg_s7i_mm: smps7 {
> >>> +			regulator-name = "vreg_s7i_mm";
> >>> +			regulator-min-microvolt = <300000>;
> >>> +			regulator-max-microvolt = <1200000>;
> >>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >>> +			regulator-allow-set-load;
> >>> +			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> >>> +						   RPMH_REGULATOR_MODE_HPM>;
> >>
> >> Are these actually exposed as regulators and not RPMHPDs?
> > 
> > Great catch, Konrad! These are rpmhpd-managed resources and shouldn't be
> > here. I will drop them.
> 
> Don't you get a huge log of errors with these in place?

Nope. If we do, we must have already fixed the problem :)

Shawn