From: Nick Huang <sef1548@gmail.com>
To: Hemanth Selam <hemanth.selam@gmail.com>
Cc: "Lee Jones" <lee@kernel.org>,
"Support Opensource" <support.opensource@diasemi.com>,
"Matti Vaittinen" <mazziesaccount@gmail.com>,
"André Draszik" <andre.draszik@linaro.org>,
linux-kernel@vger.kernel.org, mfd@lists.linux.dev,
linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH] mfd: fix typos in comments
Date: Sat, 5 Sep 2026 12:09:21 +0000 [thread overview]
Message-ID: <apwGcRLAYLPKFuZK@nickhuang> (raw)
In-Reply-To: <20260904122834.33723-1-hemanth.selam@gmail.com>
On Fri, Sep 04, 2026 at 05:58:28PM +0530, Hemanth Selam wrote:
> Fix typos in comments, reported by scripts/checkpatch.pl using the
> misspelling list in scripts/spelling.txt. Only touches comments, no code
> changes.
>
> Assisted-by: Cursor:claude-opus-5
> Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
> ---
> drivers/mfd/88pm800.c | 2 +-
> drivers/mfd/kempld-core.c | 2 +-
> drivers/mfd/max8998.c | 2 +-
> drivers/mfd/rave-sp.c | 6 +++---
> drivers/mfd/si476x-i2c.c | 2 +-
> include/linux/mfd/da9063/registers.h | 2 +-
> include/linux/mfd/db8500-prcmu.h | 32 ++++++++++++++--------------
> include/linux/mfd/lp8788.h | 2 +-
> include/linux/mfd/max8998.h | 2 +-
> include/linux/mfd/palmas.h | 2 +-
> include/linux/mfd/rohm-bd71828.h | 2 +-
> include/linux/mfd/samsung/core.h | 2 +-
> include/linux/mfd/si476x-core.h | 2 +-
> include/linux/mfd/twl.h | 2 +-
> 14 files changed, 31 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
> index e9941da58b18..aac630322b3c 100644
> --- a/drivers/mfd/88pm800.c
> +++ b/drivers/mfd/88pm800.c
> @@ -275,7 +275,7 @@ static int device_gpadc_init(struct pm80x_chip *chip,
> goto out;
>
> /*
> - * the defult of PM800 is GPADC operates at 100Ks/s rate
> + * the default of PM800 is GPADC operates at 100Ks/s rate
> * and Number of GPADC slots with active current bias prior
> * to GPADC sampling = 1 slot for all GPADCs set for
> * Temprature mesurmants
> diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
> index b64729918dfd..47062f876e5d 100644
> --- a/drivers/mfd/kempld-core.c
> +++ b/drivers/mfd/kempld-core.c
> @@ -37,7 +37,7 @@ static void kempld_get_hardware_mutex(struct kempld_device_data *pld)
>
> static void kempld_release_hardware_mutex(struct kempld_device_data *pld)
> {
> - /* The harware mutex is released when 1 is written to the mutex bit. */
> + /* The hardware mutex is released when 1 is written to the mutex bit. */
> iowrite8(KEMPLD_MUTEX_KEY, pld->io_index);
> }
>
> diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c
> index eb13bbaeda55..5032eab05bb4 100644
> --- a/drivers/mfd/max8998.c
> +++ b/drivers/mfd/max8998.c
> @@ -146,7 +146,7 @@ static struct max8998_platform_data *max8998_i2c_parse_dt_pdata(
>
> /*
> * ToDo: the 'wakeup' member in the platform data is more of a linux
> - * specfic information. Hence, there is no binding for that yet and
> + * specific information. Hence, there is no binding for that yet and
> * not parsed here.
> */
> return pd;
> diff --git a/drivers/mfd/rave-sp.c b/drivers/mfd/rave-sp.c
> index 05d26d92df03..53c57bafea8f 100644
> --- a/drivers/mfd/rave-sp.c
> +++ b/drivers/mfd/rave-sp.c
> @@ -331,7 +331,7 @@ static u8 rave_sp_reply_code(u8 command)
> return command + 0x20;
> case 0xE0 ... 0xEF:
> /*
> - * Events emitted by all versions of the firmare use
> + * Events emitted by all versions of the firmware use
> * least significant bit to get an ACK code
> */
> return command | 0x01;
> @@ -544,7 +544,7 @@ static size_t rave_sp_receive_buf(struct serdev_device *serdev,
> * NOTE: The above means that only the
> * frame started by third SOF, sent
> * after this one will have a chance
> - * to get throught.
> + * to get through.
> */
> goto reset_framer;
> case RAVE_SP_DLE:
> @@ -595,7 +595,7 @@ static size_t rave_sp_receive_buf(struct serdev_device *serdev,
>
> /*
> * The only way to get out of the above loop and end up here
> - * is throught consuming all of the supplied data, so here we
> + * is through consuming all of the supplied data, so here we
> * report that we processed it all.
> */
> return size;
> diff --git a/drivers/mfd/si476x-i2c.c b/drivers/mfd/si476x-i2c.c
> index 9bce720a0a08..6351aef2d3bb 100644
> --- a/drivers/mfd/si476x-i2c.c
> +++ b/drivers/mfd/si476x-i2c.c
> @@ -222,7 +222,7 @@ int si476x_core_stop(struct si476x_core *core, bool soft)
> atomic_set(&core->is_alive, 0);
>
> if (soft) {
> - /* TODO: This probably shoud be a configurable option,
> + /* TODO: This probably should be a configurable option,
> * so it is possible to have the chips keep their
> * oscillators running
> */
> diff --git a/include/linux/mfd/da9063/registers.h b/include/linux/mfd/da9063/registers.h
> index 7b8364bd08a0..376c5d330599 100644
> --- a/include/linux/mfd/da9063/registers.h
> +++ b/include/linux/mfd/da9063/registers.h
> @@ -14,7 +14,7 @@
> #define DA9063_I2C_PAGE_SEL_SHIFT 1
> #define DA9063_EVENT_REG_NUM 4
>
> -/* Page selection I2C or SPI always in the begining of any page. */
> +/* Page selection I2C or SPI always in the beginning of any page. */
> /* Page 0 : I2C access 0x000 - 0x0FF SPI access 0x000 - 0x07F */
> /* Page 1 : SPI access 0x080 - 0x0FF */
> /* Page 2 : I2C access 0x100 - 0x1FF SPI access 0x100 - 0x17F */
> diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
> index c939c9a1170a..87a28c4f1d81 100644
> --- a/include/linux/mfd/db8500-prcmu.h
> +++ b/include/linux/mfd/db8500-prcmu.h
> @@ -337,31 +337,31 @@ enum sia_mmdsp_stat {
> * @SYSCLKOK_ERR: The SYSCLK is not available in the given time
> * @BOOT_ERR: Romcode has not validated the XP70 self reset in the given time
> * @ROMCODESAVECONTEXT: The Romcode didn.t correctly save it secure context
> - * @VARMHIGHSPEEDVALTO_ERR: The ARM high speed supply value transfered
> + * @VARMHIGHSPEEDVALTO_ERR: The ARM high speed supply value transferred
> * through I2C has not been correctly executed in the given time
> - * @VARMHIGHSPEEDACCESS_ERR: The command value of VarmHighSpeedVal transfered
> + * @VARMHIGHSPEEDACCESS_ERR: The command value of VarmHighSpeedVal transferred
> * through I2C has not been correctly executed in the given time
> - * @VARMLOWSPEEDVALTO_ERR:The ARM low speed supply value transfered through
> + * @VARMLOWSPEEDVALTO_ERR:The ARM low speed supply value transferred through
> * I2C has not been correctly executed in the given time
> - * @VARMLOWSPEEDACCESS_ERR: The command value of VarmLowSpeedVal transfered
> + * @VARMLOWSPEEDACCESS_ERR: The command value of VarmLowSpeedVal transferred
> * through I2C has not been correctly executed in the given time
> - * @VARMRETENTIONVALTO_ERR: The ARM retention supply value transfered through
> + * @VARMRETENTIONVALTO_ERR: The ARM retention supply value transferred through
> * I2C has not been correctly executed in the given time
> - * @VARMRETENTIONACCESS_ERR: The command value of VarmRetentionVal transfered
> + * @VARMRETENTIONACCESS_ERR: The command value of VarmRetentionVal transferred
> * through I2C has not been correctly executed in the given time
> - * @VAPEHIGHSPEEDVALTO_ERR: The APE highspeed supply value transfered through
> + * @VAPEHIGHSPEEDVALTO_ERR: The APE highspeed supply value transferred through
> * I2C has not been correctly executed in the given time
> - * @VSAFEHPVALTO_ERR: The SAFE high power supply value transfered through I2C
> + * @VSAFEHPVALTO_ERR: The SAFE high power supply value transferred through I2C
> * has not been correctly executed in the given time
> - * @VMODSEL1VALTO_ERR: The MODEM sel1 supply value transfered through I2C has
> + * @VMODSEL1VALTO_ERR: The MODEM sel1 supply value transferred through I2C has
> * not been correctly executed in the given time
> - * @VMODSEL2VALTO_ERR: The MODEM sel2 supply value transfered through I2C has
> + * @VMODSEL2VALTO_ERR: The MODEM sel2 supply value transferred through I2C has
> * not been correctly executed in the given time
> - * @VARMOFFACCESS_ERR: The command value of Varm ON/OFF transfered through
> + * @VARMOFFACCESS_ERR: The command value of Varm ON/OFF transferred through
> * I2C has not been correctly executed in the given time
> - * @VAPEOFFACCESS_ERR: The command value of Vape ON/OFF transfered through
> + * @VAPEOFFACCESS_ERR: The command value of Vape ON/OFF transferred through
> * I2C has not been correctly executed in the given time
> - * @VARMRETACCES_ERR: The command value of Varm retention ON/OFF transfered
> + * @VARMRETACCES_ERR: The command value of Varm retention ON/OFF transferred
> * through I2C has not been correctly executed in the given time
> * @CURAPPWRSTISNOTBOOT:Generated when Arm want to do power state transition
> * ApBoot to ApExecute but the power current state is not Apboot
> @@ -376,11 +376,11 @@ enum sia_mmdsp_stat {
> * been correctly executed in the given time
> * @ARMREGU2VALTO_ERR: The ArmRegu2 value transferred through I2C has not
> * been correctly executed in the given time
> - * @VAPEREGUVALTO_ERR: The VApeRegu value transfered through I2C has not
> + * @VAPEREGUVALTO_ERR: The VApeRegu value transferred through I2C has not
> * been correctly executed in the given time
> - * @VSMPS3REGUVALTO_ERR: The VSmps3Regu value transfered through I2C has not
> + * @VSMPS3REGUVALTO_ERR: The VSmps3Regu value transferred through I2C has not
> * been correctly executed in the given time
> - * @VMODREGUVALTO_ERR: The VModemRegu value transfered through I2C has not
> + * @VMODREGUVALTO_ERR: The VModemRegu value transferred through I2C has not
> * been correctly executed in the given time
> */
> enum mbox_to_arm_err {
> diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h
> index fd17bec2a33e..e8c50bd38a8a 100644
> --- a/include/linux/mfd/lp8788.h
> +++ b/include/linux/mfd/lp8788.h
> @@ -34,7 +34,7 @@
> #define LP8788_ALM_IRQ "ALARM_IRQ"
>
> enum lp8788_int_id {
> - /* interrup register 1 : Addr 00h */
> + /* interrupt register 1 : Addr 00h */
> LP8788_INT_TSDL,
> LP8788_INT_TSDH,
> LP8788_INT_UVLO,
> diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
> index 5473f1983e31..ad2ad24412fb 100644
> --- a/include/linux/mfd/max8998.h
> +++ b/include/linux/mfd/max8998.h
> @@ -45,7 +45,7 @@ enum {
> /**
> * max8998_regulator_data - regulator data
> * @id: regulator id
> - * @initdata: regulator init data (contraints, supplies, ...)
> + * @initdata: regulator init data (constraints, supplies, ...)
> * @reg_node: DT node of regulator (unused on non-DT platforms)
> */
> struct max8998_regulator_data {
> diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
> index dabcc0dea802..1d872363820a 100644
> --- a/include/linux/mfd/palmas.h
> +++ b/include/linux/mfd/palmas.h
> @@ -251,7 +251,7 @@ enum tps65917_regulators {
> TPS65917_NUM_REGS,
> };
>
> -/* External controll signal name */
> +/* External control signal name */
> enum {
> PALMAS_EXT_CONTROL_ENABLE1 = 0x1,
> PALMAS_EXT_CONTROL_ENABLE2 = 0x2,
> diff --git a/include/linux/mfd/rohm-bd71828.h b/include/linux/mfd/rohm-bd71828.h
> index 39fe275a8117..ea9b1a8f495f 100644
> --- a/include/linux/mfd/rohm-bd71828.h
> +++ b/include/linux/mfd/rohm-bd71828.h
> @@ -186,7 +186,7 @@ enum {
> #define BD71828_REG_RTC_ALM2 0x63
> #define BD71828_REG_RTC_START BD71828_REG_RTC_SEC
>
> -/* Charger/Battey */
> +/* Charger/Battery */
> #define BD71828_REG_CHG_STATE 0x65
> #define BD71828_REG_CHG_FULL 0xd2
> #define BD71828_REG_CHG_EN 0x6F
> diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
> index 6191f409de94..e489ca0d55ed 100644
> --- a/include/linux/mfd/samsung/core.h
> +++ b/include/linux/mfd/samsung/core.h
> @@ -106,7 +106,7 @@ struct sec_platform_data {
> /**
> * sec_regulator_data - regulator data
> * @id: regulator id
> - * @initdata: regulator init data (contraints, supplies, ...)
> + * @initdata: regulator init data (constraints, supplies, ...)
> */
> struct sec_regulator_data {
> int id;
> diff --git a/include/linux/mfd/si476x-core.h b/include/linux/mfd/si476x-core.h
> index d9e3a322134c..40866d7162c9 100644
> --- a/include/linux/mfd/si476x-core.h
> +++ b/include/linux/mfd/si476x-core.h
> @@ -97,7 +97,7 @@ enum si476x_power_state {
> * @command: Wait queue for wainting on the command comapletion.
> * @cts: Clear To Send flag set upon receiving first status with CTS
> * set.
> - * @tuning: Wait queue used for wainting for tune/seek comand
> + * @tuning: Wait queue used for wainting for tune/seek command
> * completion.
> * @stc: Similar to @cts, but for the STC bit of the status value.
> * @power_up_parameters: Parameters used as argument for POWER_UP
> diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
> index b31e07fa4d51..238d9dcefc35 100644
> --- a/include/linux/mfd/twl.h
> +++ b/include/linux/mfd/twl.h
> @@ -739,7 +739,7 @@ int twl4030_sih_setup(struct device *dev, int module, int irq_base);
> #define TWL4030_REG_VUSB3V1 19
>
> /* TWL6030 SMPS/LDO's */
> -/* EXTERNAL dc-to-dc buck convertor controllable via SR */
> +/* EXTERNAL dc-to-dc buck converter controllable via SR */
> #define TWL6030_REG_VDD1 30
> #define TWL6030_REG_VDD2 31
> #define TWL6030_REG_VDD3 32
> --
> 2.48.1
>
Hi Hemanth
LGTM
Acked-by: Nick Huang <sef1548@gmail.com>
prev parent reply other threads:[~2026-09-05 12:09 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-04 12:28 [PATCH] mfd: fix typos in comments Hemanth Selam
2026-09-05 10:55 ` Matti Vaittinen
2026-09-05 12:05 ` Botsz HUANG
2026-09-08 6:54 ` Krzysztof Kozlowski
2026-09-09 16:14 ` Lee Jones
2026-09-09 16:17 ` Lee Jones
2026-09-10 6:16 ` Krzysztof Kozlowski
2026-09-10 9:43 ` Lee Jones
2026-09-11 8:51 ` Hemanth Selam
2026-09-05 12:09 ` Nick Huang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=apwGcRLAYLPKFuZK@nickhuang \
--to=sef1548@gmail.com \
--cc=andre.draszik@linaro.org \
--cc=hemanth.selam@gmail.com \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mazziesaccount@gmail.com \
--cc=mfd@lists.linux.dev \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.