From: Frank Li <Frank.li@oss.nxp.com>
To: Rosen Penev <rosenp@gmail.com>
Cc: dmaengine@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
Frank Li <Frank.Li@kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCHv3] dmaengine: bestcomm: ioremap early
Date: Wed, 9 Sep 2026 10:49:10 -0500 [thread overview]
Message-ID: <aqF_9tvVIE43hIKw@SMW015318> (raw)
In-Reply-To: <20260908213049.592138-1-rosenp@gmail.com>
On Tue, Sep 08, 2026 at 02:30:49PM -0700, Rosen Penev wrote:
> Replace the open-coded resource lookup, request_mem_region, ioremap and
> the manual iounmap/release_mem_region cleanup in probe/remove with the
> managed devm_platform_get_and_ioremap_resource() helper. This removes the
> now-unused error-unmap/release paths and simplifies probing.
>
> Fix a resource size mismatch between allocating and freeing where
> request_mem_region() and release_mem_region() hopefully use the same size
> but is not guarenteed.
>
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
> v3: reword again
Miss update subject:
dmaengine: bestcomm: use devm_platform_get_and_ioremap_resource() to simplify code
Frank
> v2: remove Sashiko generated description. Reword description.
> drivers/dma/bestcomm/bestcomm.c | 45 ++++++++-------------------------
> 1 file changed, 10 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/dma/bestcomm/bestcomm.c b/drivers/dma/bestcomm/bestcomm.c
> index 432b43520ddc..44ff4a42376b 100644
> --- a/drivers/dma/bestcomm/bestcomm.c
> +++ b/drivers/dma/bestcomm/bestcomm.c
> @@ -13,7 +13,6 @@
> #include <linux/kernel.h>
> #include <linux/slab.h>
> #include <linux/of.h>
> -#include <linux/of_address.h>
> #include <linux/of_irq.h>
> #include <linux/platform_device.h>
> #include <asm/io.h>
> @@ -365,13 +364,19 @@ bcom_engine_cleanup(void)
> static int mpc52xx_bcom_probe(struct platform_device *op)
> {
> struct device_node *ofn_sram;
> - struct resource res_bcom;
> + struct resource *res_bcom;
> + void __iomem *regs;
>
> int rv;
>
> /* Inform user we're ok so far */
> printk(KERN_INFO "DMA: MPC52xx BestComm driver\n");
>
> + /* Get, reserve & map io */
> + regs = devm_platform_get_and_ioremap_resource(op, 0, &res_bcom);
> + if (IS_ERR(regs))
> + return PTR_ERR(regs);
> +
> /* Get the bestcomm node */
> of_node_get(op->dev.of_node);
>
> @@ -402,35 +407,13 @@ static int mpc52xx_bcom_probe(struct platform_device *op)
> /* Save the node */
> bcom_eng->ofnode = op->dev.of_node;
>
> - /* Get, reserve & map io */
> - if (of_address_to_resource(op->dev.of_node, 0, &res_bcom)) {
> - printk(KERN_ERR DRIVER_NAME ": "
> - "Can't get resource\n");
> - rv = -EINVAL;
> - goto error_sramclean;
> - }
> -
> - if (!request_mem_region(res_bcom.start, resource_size(&res_bcom),
> - DRIVER_NAME)) {
> - printk(KERN_ERR DRIVER_NAME ": "
> - "Can't request registers region\n");
> - rv = -EBUSY;
> - goto error_sramclean;
> - }
> -
> - bcom_eng->regs_base = res_bcom.start;
> - bcom_eng->regs = ioremap(res_bcom.start, sizeof(struct mpc52xx_sdma));
> - if (!bcom_eng->regs) {
> - printk(KERN_ERR DRIVER_NAME ": "
> - "Can't map registers\n");
> - rv = -ENOMEM;
> - goto error_release;
> - }
> + bcom_eng->regs = regs;
> + bcom_eng->regs_base = res_bcom->start;
>
> /* Now, do the real init */
> rv = bcom_engine_init();
> if (rv)
> - goto error_unmap;
> + goto error_sramclean;
>
> /* Done ! */
> printk(KERN_INFO "DMA: MPC52xx BestComm engine @%08lx ok !\n",
> @@ -439,10 +422,6 @@ static int mpc52xx_bcom_probe(struct platform_device *op)
> return 0;
>
> /* Error path */
> -error_unmap:
> - iounmap(bcom_eng->regs);
> -error_release:
> - release_mem_region(res_bcom.start, sizeof(struct mpc52xx_sdma));
> error_sramclean:
> kfree(bcom_eng);
> bcom_sram_cleanup();
> @@ -463,10 +442,6 @@ static void mpc52xx_bcom_remove(struct platform_device *op)
> /* Cleanup SRAM */
> bcom_sram_cleanup();
>
> - /* Release regs */
> - iounmap(bcom_eng->regs);
> - release_mem_region(bcom_eng->regs_base, sizeof(struct mpc52xx_sdma));
> -
> /* Release the node */
> of_node_put(bcom_eng->ofnode);
>
> --
> 2.55.0
>
prev parent reply other threads:[~2026-09-09 15:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-08 21:30 [PATCHv3] dmaengine: bestcomm: ioremap early Rosen Penev
2026-09-08 21:40 ` sashiko-bot
2026-09-09 15:49 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aqF_9tvVIE43hIKw@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rosenp@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.