All of lore.kernel.org
 help / color / mirror / Atom feed
From: Uladzislau Rezki <urezki@gmail.com>
To: Wen Jiang <jiangwenxiaomi@gmail.com>
Cc: akpm@linux-foundation.org, catalin.marinas@arm.com,
	linux-mm@kvack.org, urezki@gmail.com, will@kernel.org,
	Xueyuan.chen21@gmail.com, ajd@linux.ibm.com,
	anshuman.khandual@arm.com, baohua@kernel.org, chleroy@kernel.org,
	david@kernel.org, dev.jain@arm.com, jiangwen6@xiaomi.com,
	leo.yan@arm.com, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	maddy@linux.ibm.com, mpe@ellerman.id.au, npiggin@gmail.com,
	rppt@kernel.org, ryan.roberts@arm.com
Subject: Re: [PATCH v9 09/10] mm/vmalloc: map contiguous pages in batches for vmap() if possible
Date: Wed, 30 Sep 2026 17:05:22 +0200	[thread overview]
Message-ID: <ar0lMkKxugZV7xyw@milan> (raw)
In-Reply-To: <20260923062832.479455-10-jiangwen6@xiaomi.com>

On Wed, Sep 23, 2026 at 02:28:31PM +0800, Wen Jiang wrote:
> From: "Barry Song (Xiaomi)" <baohua@kernel.org>
> 
> In many cases, the pages passed to vmap() may include high-order
> pages. For example, the systemheap often allocates pages in descending
> order: order 8, then 4, then 0. Currently, vmap() iterates over every
> page individually—even pages inside a high-order block are handled
> one by one.
> 
> This patch detects physically contiguous pages (regardless of whether
> they are compound or non-compound) by scanning with
> num_pages_contiguous(), and maps them as a single contiguous block
> whenever possible. The mapping order is determined by taking the
> minimum of the contiguous page count and the pfn alignment, allowing
> graceful degradation when pfn alignment is less than the contiguous
> range.
> 
> Pages with the same page_shift are coalesced and mapped via
> vmap_pages_range_noflush_walk() to avoid page table rewalk.
> 
> As users typically allocate memory in descending orders (e.g.
> 8 → 4 → 0), once an order-0 page is encountered, we stop scanning
> for contiguous pages since subsequent pages are likely order-0 as well.
> 
> Signed-off-by: Barry Song (Xiaomi) <baohua@kernel.org>
> Co-developed-by: Dev Jain <dev.jain@arm.com>
> Signed-off-by: Dev Jain <dev.jain@arm.com>
> Signed-off-by: Wen Jiang <jiangwen6@xiaomi.com>
> Tested-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
> Tested-by: Leo Yan <leo.yan@arm.com>
> ---
>  mm/vmalloc.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 80 insertions(+), 2 deletions(-)
> 
> diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> index a43965016eb4d..37cddb7f45a4f 100644
> --- a/mm/vmalloc.c
> +++ b/mm/vmalloc.c
> @@ -3576,6 +3576,85 @@ static inline unsigned int vm_shift(pgprot_t prot, unsigned long size)
>  	return arch_vmap_pte_supported_shift(size);
>  }
>  
> +static inline int get_vmap_batch_order(struct page **pages,
> +		pgprot_t prot, unsigned int nr_pages)
>
get_vmap_mapping_order()?

> +{
> +	unsigned long pfn;
> +	unsigned int nr_contig;
> +	int order;
> +
> +	if (!IS_ENABLED(CONFIG_HAVE_ARCH_HUGE_VMAP))
> +		return 0;
> +
> +	/* Limit nr_pages by pfn alignment */
> +	pfn = page_to_pfn(*pages);
> +	if (pfn > 0)
> +		nr_pages = min_t(size_t, nr_pages, 1UL << __ffs(pfn));
> +
> +	nr_contig = num_pages_contiguous(pages, nr_pages);
> +	if (nr_contig < 2)
> +		return 0;
> +
> +	order = ilog2(nr_contig);
> +
> +	if (vm_shift(prot, PAGE_SIZE << order) == PAGE_SHIFT)
> +		return 0;
> +
> +	return order;
> +}
> +
> +static int vmap_pages_range_batched(unsigned long addr, unsigned long end,
> +		pgprot_t prot, struct page **pages)
> +{
> +	const unsigned int nr_pages = (end - addr) >> PAGE_SHIFT;
> +	unsigned int prev_shift = 0, batch_idx = 0;
> +	unsigned long batch_start = addr, batch_end = addr;
> +	int err;
> +
> +	err = kmsan_vmap_pages_range_noflush(addr, end, prot, pages,
> +					     PAGE_SHIFT, GFP_KERNEL);
> +
> +	if (err)
> +		goto out;
> +
> +	for (unsigned int i = 0; i < nr_pages; ) {
> +		unsigned int shift = PAGE_SHIFT +
> +			get_vmap_batch_order(pages + i, prot, nr_pages - i);
> +
> +		if (!i)
> +			prev_shift = shift;
> +
> +		if (shift != prev_shift) {
> +			err = vmap_pages_range_noflush_walk(batch_start, batch_end,
> +					prot, pages + batch_idx, prev_shift);
> +			if (err)
> +				goto out;
> +			prev_shift = shift;
> +			batch_start = batch_end;
> +			batch_idx = i;
> +		}
> +
> +		/*
> +		 * Once we fail to batch pages, we expect to fail batching
> +		 * for all remaining pages, so just give up.
> +		 */
> +		if (shift == PAGE_SHIFT)
> +			break;
> +
> +		batch_end += 1UL << shift;
> +		i += 1U << (shift - PAGE_SHIFT);
> +	}
> +
> +	/* Remaining */
> +	if (batch_start < end)
> +		err = vmap_pages_range_noflush_walk(batch_start, end, prot,
> +				pages + batch_idx, prev_shift);
> +
> +out:
> +	flush_cache_vmap(addr, end);
> +	return err;
>
On error, if kmsan_vmap_pages_range_noflush() succeed you do not do a
proper cleanup?

i.e. to cleanup KMSAN metadata: kmsan_vunmap_range_noflush(addr, end);

> +}
> +
>  /**
>   * vmap - map an array of pages into virtually contiguous space
>   * @pages: array of page pointers
> @@ -3619,8 +3698,7 @@ void *vmap(struct page **pages, unsigned int count,
>  		return NULL;
>  
>  	addr = (unsigned long)area->addr;
> -	if (vmap_pages_range(addr, addr + size, pgprot_nx(prot),
> -				pages, PAGE_SHIFT) < 0) {
> +	if (vmap_pages_range_batched(addr, addr + size, pgprot_nx(prot), pages) < 0) {
>  		vunmap(area->addr);
>  		return NULL;
>  	}
> -- 
> 2.34.1
> 


  reply	other threads:[~2026-09-30 15:05 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-23  6:28 [PATCH v9 00/10] mm/vmalloc: Speed up ioremap, vmalloc and vmap with contiguous memory Wen Jiang
2026-09-23  6:28 ` [PATCH v9 01/10] arm64/mm: add pte_set_huge() and pte_clear_huge() Wen Jiang
2026-09-23 21:30   ` Barry Song
2026-09-28  2:42     ` Wen Jiang
2026-09-23  6:28 ` [PATCH v9 02/10] powerpc/8xx: add pte_set_huge() Wen Jiang
2026-09-23  6:28 ` [PATCH v9 03/10] mm/vmalloc: use pte_set_huge()/pte_clear_huge() for PTE-level block mappings Wen Jiang
2026-09-23 21:38   ` Barry Song
2026-09-23 21:57     ` Christophe Leroy (CS GROUP)
2026-09-29  2:21     ` Wen Jiang
2026-09-23  6:28 ` [PATCH v9 04/10] arm64/hugetlb: drop the init_mm special case in clear_flush() Wen Jiang
2026-09-23 21:23   ` Barry Song
2026-09-23  6:28 ` [PATCH v9 05/10] arm64/vmalloc: allow arch_vmap_pte_range_map_size() to batch multiple CONT_PTE Wen Jiang
2026-09-30 15:37   ` Uladzislau Rezki
2026-10-01  7:55     ` Wen Jiang
2026-10-01 15:56       ` Uladzislau Rezki
2026-09-23  6:28 ` [PATCH v9 06/10] mm/vmalloc: extract vmap_set_ptes() to consolidate PTE mapping logic Wen Jiang
2026-09-30 14:39   ` Uladzislau Rezki
2026-10-01  7:58     ` Wen Jiang
2026-10-01 15:54       ` Uladzislau Rezki
2026-09-23  6:28 ` [PATCH v9 07/10] mm/vmalloc: extend page table walk to support larger page_shift sizes and eliminate page table rewalk Wen Jiang
2026-09-30 15:16   ` Uladzislau Rezki
2026-10-01  8:02     ` Wen Jiang
2026-10-01 15:52       ` Uladzislau Rezki
2026-09-23  6:28 ` [PATCH v9 08/10] mm/vmalloc: extract vm_shift() to consolidate mapping shift selection Wen Jiang
2026-09-30 14:46   ` Uladzislau Rezki
2026-09-23  6:28 ` [PATCH v9 09/10] mm/vmalloc: map contiguous pages in batches for vmap() if possible Wen Jiang
2026-09-30 15:05   ` Uladzislau Rezki [this message]
2026-10-01  8:09     ` Wen Jiang
2026-10-01 15:48       ` Uladzislau Rezki
2026-09-23  6:28 ` [PATCH v9 10/10] mm/vmalloc: align vm_area so vmap() can batch mappings Wen Jiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ar0lMkKxugZV7xyw@milan \
    --to=urezki@gmail.com \
    --cc=Xueyuan.chen21@gmail.com \
    --cc=ajd@linux.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=anshuman.khandual@arm.com \
    --cc=baohua@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=chleroy@kernel.org \
    --cc=david@kernel.org \
    --cc=dev.jain@arm.com \
    --cc=jiangwen6@xiaomi.com \
    --cc=jiangwenxiaomi@gmail.com \
    --cc=leo.yan@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=maddy@linux.ibm.com \
    --cc=mpe@ellerman.id.au \
    --cc=npiggin@gmail.com \
    --cc=rppt@kernel.org \
    --cc=ryan.roberts@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.