From: Frank Li <Frank.li@oss.nxp.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Frank Li <Frank.Li@nxp.com>, Mark Brown <broonie@kernel.org>,
kernel@pengutronix.de, linux-spi@vger.kernel.org,
imx@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH spi-next 3/3] spi: spi-fsl-lpspi: cache content of Interrupt Enable Register (IER)
Date: Mon, 12 Oct 2026 14:31:30 -0500 [thread overview]
Message-ID: <as01km6qZJ-pxOa4@SMW015318> (raw)
In-Reply-To: <20261009-spi-fsl-lpspi-more-cleanups-v1-3-2d4549d5205e@pengutronix.de>
On Fri, Oct 09, 2026 at 12:16:37PM +0200, Marc Kleine-Budde wrote:
> To improve performance avoid reading the Interrupt Enable Register (IER)
> from the hardware, cache in struct fsl_lpspi_data::reg_ier.
Do you have bench mark data? I am not sure how much gain by only avoid
a register read.
Frank
>
> Introduce struct fsl_lpspi_data::reg_ier, to cache the current value.
> Extend fsl_lpspi_intctrl() to update the cache and replace the open coded
> writing of the IRQ register in fsl_lpspi_prepare_message() with
> fsl_lpspi_intctrl().
>
> In fsl_lpspi_isr() don't read the IER from the hardware, but use the cached
> value from struct fsl_lpspi_data::reg_ier.
>
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> ---
> drivers/spi/spi-fsl-lpspi.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
> index b25f94b2ef73..5b158b0cb5af 100644
> --- a/drivers/spi/spi-fsl-lpspi.c
> +++ b/drivers/spi/spi-fsl-lpspi.c
> @@ -122,6 +122,7 @@ struct fsl_lpspi_data {
> void (*rx)(struct fsl_lpspi_data *fsl_lpspi);
>
> u32 remain;
> + u32 reg_ier;
> u8 watermark;
> u8 txfifosize;
> u8 rxfifosize;
> @@ -199,6 +200,7 @@ LPSPI_BUF_TX(u32)
> static void fsl_lpspi_intctrl(struct fsl_lpspi_data *fsl_lpspi,
> unsigned int enable)
> {
> + fsl_lpspi->reg_ier = enable;
> writel(enable, fsl_lpspi->base + IMX7ULP_IER);
> }
>
> @@ -525,7 +527,7 @@ static int fsl_lpspi_prepare_message(struct spi_controller *controller,
> fsl_lpspi_set_cmd(fsl_lpspi);
>
> /* No IRQs */
> - writel(0, fsl_lpspi->base + IMX7ULP_IER);
> + fsl_lpspi_intctrl(fsl_lpspi, 0);
>
> /* Controller disable, clear FIFOs, clear status */
> writel(CR_RRF | CR_RTF, fsl_lpspi->base + IMX7ULP_CR);
> @@ -808,7 +810,7 @@ static irqreturn_t fsl_lpspi_isr(int irq, void *dev_id)
> u32 temp_SR, temp_IER;
> struct fsl_lpspi_data *fsl_lpspi = dev_id;
>
> - temp_IER = readl(fsl_lpspi->base + IMX7ULP_IER);
> + temp_IER = fsl_lpspi->reg_ier;
> fsl_lpspi_intctrl(fsl_lpspi, 0);
> temp_SR = readl(fsl_lpspi->base + IMX7ULP_SR);
>
>
> --
> 2.53.0
>
>
prev parent reply other threads:[~2026-10-12 19:31 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-09 10:16 [PATCH spi-next 0/3] spi: spi-fsl-lpspi: various cleanup and enhancement patches - part 2 Marc Kleine-Budde
2026-10-09 10:16 ` [PATCH spi-next 1/3] spi: spi-fsl-lpspi: pass struct fsl_lpspi_data instead of struct spi_controller if possible Marc Kleine-Budde
2026-10-12 19:29 ` Frank Li
2026-10-09 10:16 ` [PATCH spi-next 2/3] spi: spi-fsl-lpspi: fsl_lpspi_transfer_one(): directly return ret Marc Kleine-Budde
2026-10-12 19:30 ` Frank Li
2026-10-09 10:16 ` [PATCH spi-next 3/3] spi: spi-fsl-lpspi: cache content of Interrupt Enable Register (IER) Marc Kleine-Budde
2026-10-09 11:37 ` sashiko-bot
2026-10-12 19:31 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=as01km6qZJ-pxOa4@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=broonie@kernel.org \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mkl@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.