From: Hangbin Liu <hangbin.liu@linux.dev>
To: Gabriel Goller <g.goller@proxmox.com>
Cc: Andrea Mayer <andrea.mayer@uniroma2.it>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next v5] net: ipv6: seg6: report lwtunnel setup errors via extack
Date: Tue, 13 Oct 2026 14:14:02 +0800 [thread overview]
Message-ID: <as3MKiW1mqrX1MgC@fedora> (raw)
In-Reply-To: <20261009152015.462383-1-g.goller@proxmox.com>
Hi Gabriel,
On Fri, Oct 09, 2026 at 05:20:13PM +0200, Gabriel Goller wrote:
> seg6_build_state() rejected invalid configurations with a generic -EINVAL,
> so "ip route add ... encap seg6 ..." sometimes reported "Invalid argument".
>
> Add extack messages to the checks that lacked one, and use
> NL_REQ_ATTR_CHECK() for the missing SRH attribute so that userspace can
> tell which attribute is missing. The checks themselves and their return
> values are unchanged.
>
> Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
> ---
>
> v5 (https://lore.kernel.org/all/20261005140637.644840-1-g.goller@proxmox.com/):
> * use NL_REQ_ATTR_CHECK() for the missing SRH attribute (Jakub)
> * reword the inline mode message to "inline mode requires the IPv6
> address family", since it also applies to IPv4 nexthop objects
> (Andrea)
> * consistently call the header "IPv6 Segment Routing Header" (RFC 8754)
> in all messages (Andrea)
> * include the offending mode value in the invalid mode message
> * reword the commit message to match
>
> v4 (https://lore.kernel.org/all/20260923120228.172643-1-g.goller@proxmox.com/):
> * use NL_SET_ERR_MSG when the SRH attr is missing
> * use NL_SET_ERR_MSG_ATTR when we have an invalid attr
>
> v3 (https://lore.kernel.org/all/20260922090851.38978-1-g.goller@proxmox.com/):
> * format fix
> * use NL_SET_ERR_MSG_ATTR
>
> v2 (https://lore.kernel.org/all/20260918153544.1178884-1-g.goller@proxmox.com/):
> * dropped tests
>
> net/ipv6/seg6_iptunnel.c | 26 +++++++++++++++++++++-----
> 1 file changed, 21 insertions(+), 5 deletions(-)
>
> diff --git a/net/ipv6/seg6_iptunnel.c b/net/ipv6/seg6_iptunnel.c
> index 69a6ef5c5317..0d39a38a5dd2 100644
> --- a/net/ipv6/seg6_iptunnel.c
> +++ b/net/ipv6/seg6_iptunnel.c
> @@ -762,8 +762,11 @@ static int seg6_build_state(struct net *net, struct nlattr *nla,
> struct seg6_lwt *slwt;
> int err;
>
> - if (family != AF_INET && family != AF_INET6)
> + if (family != AF_INET && family != AF_INET6) {
> + NL_SET_ERR_MSG(extack,
> + "unsupported address family for SRv6 encapsulation");
> return -EINVAL;
> + }
>
> err = nla_parse_nested_deprecated(tb, SEG6_IPTUNNEL_MAX, nla,
> seg6_iptunnel_policy, extack);
> @@ -771,7 +774,7 @@ static int seg6_build_state(struct net *net, struct nlattr *nla,
> if (err < 0)
> return err;
>
> - if (!tb[SEG6_IPTUNNEL_SRH])
> + if (NL_REQ_ATTR_CHECK(extack, nla, tb, SEG6_IPTUNNEL_SRH))
> return -EINVAL;
>
> tuninfo = nla_data(tb[SEG6_IPTUNNEL_SRH]);
> @@ -782,13 +785,19 @@ static int seg6_build_state(struct net *net, struct nlattr *nla,
> */
> min_size = sizeof(*tuninfo) + sizeof(struct ipv6_sr_hdr) +
> sizeof(struct in6_addr);
> - if (tuninfo_len < min_size)
> + if (tuninfo_len < min_size) {
> + NL_SET_ERR_MSG_ATTR(extack, tb[SEG6_IPTUNNEL_SRH],
> + "truncated IPv6 Segment Routing Header attribute");
> return -EINVAL;
> + }
>
> switch (tuninfo->mode) {
> case SEG6_IPTUN_MODE_INLINE:
> - if (family != AF_INET6)
> + if (family != AF_INET6) {
> + NL_SET_ERR_MSG_ATTR(extack, tb[SEG6_IPTUNNEL_SRH],
> + "inline mode requires the IPv6 address family");
> return -EINVAL;
> + }
>
> if (tb[SEG6_IPTUNNEL_SRC]) {
> NL_SET_ERR_MSG(extack, "incompatible mode for tunsrc");
> @@ -804,12 +813,19 @@ static int seg6_build_state(struct net *net, struct nlattr *nla,
> case SEG6_IPTUN_MODE_L2ENCAP_RED:
> break;
> default:
> + NL_SET_ERR_MSG_ATTR_FMT(extack, tb[SEG6_IPTUNNEL_SRH],
> + "invalid SRv6 encapsulation mode %d",
> + tuninfo->mode);
> return -EINVAL;
> }
>
> /* verify that SRH is consistent */
> - if (!seg6_validate_srh(tuninfo->srh, tuninfo_len - sizeof(*tuninfo), false))
> + if (!seg6_validate_srh(tuninfo->srh, tuninfo_len - sizeof(*tuninfo),
> + false)) {
> + NL_SET_ERR_MSG_ATTR(extack, tb[SEG6_IPTUNNEL_SRH],
> + "invalid IPv6 Segment Routing Header");
> return -EINVAL;
> + }
>
> newts = lwtunnel_state_alloc(tuninfo_len + sizeof(*slwt));
> if (!newts)
> --
> 2.47.3
>
>
Thanks for the update.
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
next prev parent reply other threads:[~2026-10-13 6:14 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-09 15:20 [PATCH net-next v5] net: ipv6: seg6: report lwtunnel setup errors via extack Gabriel Goller
2026-10-13 6:14 ` Hangbin Liu [this message]
2026-10-13 16:04 ` Andrea Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=as3MKiW1mqrX1MgC@fedora \
--to=hangbin.liu@linux.dev \
--cc=andrea.mayer@uniroma2.it \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=g.goller@proxmox.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.