From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Karthik Poosa <karthik.poosa@intel.com>
Cc: <intel-xe@lists.freedesktop.org>, <anshuman.gupta@intel.com>,
<badal.nilawar@intel.com>, <raag.jadav@intel.com>,
<riana.tauro@intel.com>
Subject: Re: [PATCH v13 11/16] drm/xe/hwmon: Decode CRI temperature registers as IEEE-754
Date: Wed, 14 Oct 2026 13:53:55 -0400 [thread overview]
Message-ID: <as_Bs7PvYw04oQy_@intel.com> (raw)
In-Reply-To: <20261014115806.831459-12-karthik.poosa@intel.com>
On Wed, Oct 14, 2026 at 05:28:01PM +0530, Karthik Poosa wrote:
> CRI temperature registers encode package and VRAM temperatures as
> IEEE-754 floating-point values. Decode these values before exposing
> them through hwmon.
>
> Use integer-based IEEE-754 decoding since kernel code does not use
> floating-point operations and hwmon reports integer temperatures.
>
> Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
> Assisted-by: LLM
> ---
>
> v2: Add missing description for parameter 'temperature' in
> xe_hwmon_temperature_decode().
>
> v3: Add missing mmio_temp_valid() check in xe_hwmon_temp_read() for MMIO
> temperature register reads.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
>
> drivers/gpu/drm/xe/xe_hwmon.c | 99 ++++++++++++++++++++++++++++++-----
> 1 file changed, 85 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/xe/xe_hwmon.c b/drivers/gpu/drm/xe/xe_hwmon.c
> index afcc80e34bfd..dad2397db141 100644
> --- a/drivers/gpu/drm/xe/xe_hwmon.c
> +++ b/drivers/gpu/drm/xe/xe_hwmon.c
> @@ -1266,6 +1266,70 @@ xe_hwmon_temp_is_visible(struct xe_hwmon *hwmon, u32 attr, int channel)
> }
> }
>
> +#define IEEE754_SIGN REG_BIT(31)
> +#define IEEE754_EXP_MASK REG_GENMASK(30, 23)
> +#define IEEE754_MANTISSA_MASK REG_GENMASK(22, 0)
> +#define IEEE754_EXP_BIAS 127 /* Exponent bias to obtain the actual exponent */
> +#define IEEE754_MANTISSA_BITS 23 /* Mantissa width and implicit leading-1 bit position */
> +#define IEEE754_EXP_SPECIAL 0xff /* reserved exponent value encoding infinity or NaN */
> +
> +/**
> + * xe_hwmon_temperature_decode - Decode an IEEE-754 temperature register value
> + * @reg_val: The raw register value to decode
> + * @temperature: Pointer to store the decoded temperature in millidegrees Celsius.
> + *
> + * IEEE-754 single-precision format:
> + *
> + * 31 30 23 22 0
> + * +--+-----------------------------+----------------------------+
> + * | S| exponent | fraction |
> + * +--+-----------------------------+----------------------------+
> + *
> + * value = (-1)^S * 1.fraction * 2^(exponent - 127)
> + *
> + * Return: 0 on success or an error if @reg_val is non-finite or cannot be
> + * represented in millidegrees Celsius.
> + */
> +static int xe_hwmon_temperature_decode(u32 reg_val, long *temperature)
> +{
> + u32 exponent = REG_FIELD_GET(IEEE754_EXP_MASK, reg_val);
> + u32 mantissa = REG_FIELD_GET(IEEE754_MANTISSA_MASK, reg_val);
> + s64 value;
> + int shift;
> +
> + /* Exponent 0xff encodes infinity or NaN. */
> + if (exponent == IEEE754_EXP_SPECIAL)
> + return -EINVAL;
> +
> + /* Subnormal values are smaller than one millidegree Celsius. */
> + if (!exponent) {
> + *temperature = 0;
> + return 0;
> + }
> +
> + value = (s64)(mantissa | BIT(IEEE754_MANTISSA_BITS)) * MILLIDEGREE_PER_DEGREE;
> + shift = exponent - (IEEE754_EXP_BIAS + IEEE754_MANTISSA_BITS);
> + if (shift >= 0) {
> + if (shift >= BITS_PER_LONG || value > (LONG_MAX >> shift))
> + return -ERANGE;
> + value <<= shift;
> + } else if (shift > -64) {
> + value >>= -shift;
> + } else {
> + value = 0;
> + }
> +
> + /* Ensure the magnitude fits in long, which is 32-bit on some arches. */
> + if (value > LONG_MAX)
> + return -ERANGE;
> +
> + if (reg_val & IEEE754_SIGN)
> + value = -value;
> +
> + *temperature = value;
> + return 0;
> +}
> +
> static int
> xe_hwmon_temp_read(struct xe_hwmon *hwmon, u32 attr, int channel, long *val)
> {
> @@ -1275,26 +1339,33 @@ xe_hwmon_temp_read(struct xe_hwmon *hwmon, u32 attr, int channel, long *val)
> switch (attr) {
> case hwmon_temp_input:
> switch (channel) {
> - case CHANNEL_PKG:
> - case CHANNEL_VRAM:
> - reg_val = xe_mmio_read32(mmio, xe_hwmon_get_reg(hwmon, REG_TEMP, channel));
> -
> - /* HW register value is in degrees Celsius, convert to millidegrees. */
> - *val = REG_FIELD_GET(TEMP_MASK, reg_val) * MILLIDEGREE_PER_DEGREE;
> - return 0;
> case CHANNEL_MCTRL:
> return get_mc_temp(hwmon, val);
> case CHANNEL_PCIE:
> return get_pcie_temp(hwmon, val);
> + case CHANNEL_PKG:
> + case CHANNEL_VRAM:
> case CHANNEL_VRAM_N...CHANNEL_VRAM_N_MAX:
> reg_val = xe_mmio_read32(mmio, xe_hwmon_get_reg(hwmon, REG_TEMP, channel));
> - /*
> - * This temperature format is 24 bit [31:8] signed integer and 8 bit
> - * [7:0] fraction.
> - */
> - *val = (s32)(REG_FIELD_GET(TEMP_MASK_VRAM_N, reg_val)) *
> - (REG_FIELD_GET(TEMP_SIGN_MASK, reg_val) ? -1 : 1) *
> - MILLIDEGREE_PER_DEGREE;
> + if (!mmio_temp_valid(hwmon, reg_val)) {
> + drm_dbg(&hwmon->xe->drm,
> + "channel %d temperature invalid, val 0x%llx\n",
> + channel, reg_val);
> + return -ENXIO;
> + }
> + if (hwmon->xe->info.platform >= XE_CRESCENTISLAND) {
> + return xe_hwmon_temperature_decode((u32)reg_val, val);
> + } else if (channel >= CHANNEL_VRAM_N) {
> + /*
> + * This temperature format is 24 bit [31:8] signed integer and 8 bit
> + * [7:0] fraction for platforms before CRI.
> + */
> + *val = (s32)REG_FIELD_GET(TEMP_MASK_VRAM_N, reg_val) *
> + (REG_FIELD_GET(TEMP_SIGN_MASK, reg_val) ? -1 : 1) *
> + MILLIDEGREE_PER_DEGREE;
> + } else {
> + *val = REG_FIELD_GET(TEMP_MASK, reg_val) * MILLIDEGREE_PER_DEGREE;
> + }
> return 0;
> default:
> return -EOPNOTSUPP;
> --
> 2.25.1
>
next prev parent reply other threads:[~2026-10-14 17:54 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-14 11:57 [PATCH v13 00/16] drm/xe/hwmon: Update hwmon thermal mailbox Karthik Poosa
2026-10-14 11:57 ` [PATCH v13 01/16] drm/xe/hwmon: Fix pcode power limit handling Karthik Poosa
2026-10-14 17:46 ` Rodrigo Vivi
2026-10-14 11:57 ` [PATCH v13 02/16] drm/xe/hwmon: Decode mailbox temperature as sign-magnitude Karthik Poosa
2026-10-14 11:57 ` [PATCH v13 03/16] drm/xe/hwmon: Fix thermal sensor data handling Karthik Poosa
2026-10-14 12:16 ` sashiko-bot
2026-10-14 13:42 ` Poosa, Karthik
2026-10-14 17:49 ` Rodrigo Vivi
2026-10-14 11:57 ` [PATCH v13 04/16] drm/xe/hwmon: Add helpers to validate thermal sensor readings Karthik Poosa
2026-10-14 12:11 ` sashiko-bot
2026-10-14 13:17 ` Poosa, Karthik
2026-10-14 17:51 ` Rodrigo Vivi
2026-10-14 11:57 ` [PATCH v13 05/16] drm/xe/hwmon: Handle unavailable memory controller sensors Karthik Poosa
2026-10-14 11:57 ` [PATCH v13 06/16] drm/xe/hwmon: Detect unavailable PCIe thermal sensors Karthik Poosa
2026-10-14 11:57 ` [PATCH v13 07/16] drm/xe/hwmon: Consolidate temperature sensor availability checks Karthik Poosa
2026-10-14 11:57 ` [PATCH v13 08/16] drm/xe/hwmon: Cache temperature availability to reduce probe time Karthik Poosa
2026-10-14 11:57 ` [PATCH v13 09/16] drm/xe/hwmon: use CRI-specific package and VRAM temperature registers Karthik Poosa
2026-10-14 11:58 ` [PATCH v13 10/16] drm/xe/hwmon: Add platform-aware VRAM thermal channel support Karthik Poosa
2026-10-14 11:58 ` [PATCH v13 11/16] drm/xe/hwmon: Decode CRI temperature registers as IEEE-754 Karthik Poosa
2026-10-14 17:53 ` Rodrigo Vivi [this message]
2026-10-14 11:58 ` [PATCH v13 12/16] drm/xe/hwmon: Update memory controller temperature offset for CRI Karthik Poosa
2026-10-14 17:52 ` Rodrigo Vivi
2026-10-14 19:33 ` Poosa, Karthik
2026-10-14 20:01 ` Rodrigo Vivi
2026-10-14 11:58 ` [PATCH v13 13/16] drm/xe/hwmon: add PCIe temperature support " Karthik Poosa
2026-10-14 11:58 ` [PATCH v13 14/16] drm/xe/hwmon: Simplify temperature channels config Karthik Poosa
2026-10-14 11:58 ` [PATCH v13 15/16] drm/xe: Validate thermal sensor count before reads Karthik Poosa
2026-10-14 17:53 ` Rodrigo Vivi
2026-10-14 11:58 ` [PATCH v13 16/16] drm/xe/hwmon: Propagate all hardware read errors Karthik Poosa
2026-10-14 12:12 ` ✓ CI.KUnit: success for drm/xe/hwmon: Update hwmon thermal mailbox Patchwork
2026-10-14 18:40 ` ✓ Xe.CI.BAT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=as_Bs7PvYw04oQy_@intel.com \
--to=rodrigo.vivi@intel.com \
--cc=anshuman.gupta@intel.com \
--cc=badal.nilawar@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=karthik.poosa@intel.com \
--cc=raag.jadav@intel.com \
--cc=riana.tauro@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.