From: Jarkko Sakkinen <jarkko@kernel.org>
To: Cen Zhang <zzzccc427@gmail.com>
Cc: dhowells@redhat.com, paul@paul-moore.com, jmorris@namei.org,
serge@hallyn.com, keyrings@vger.kernel.org,
linux-security-module@vger.kernel.org,
linux-kernel@vger.kernel.org, baijiaju1990@gmail.com,
jjzuming@gmail.com
Subject: Re: [PATCH] keys: Protect the type name while describing a key
Date: Thu, 8 Oct 2026 20:56:01 +0300 [thread overview]
Message-ID: <asfZMToWNmQDTk4W@kernel.org> (raw)
In-Reply-To: <pm-key-management-objects-candidate-0009-v3-43bbf21d1c452f23d829@gmail.com>
On Thu, Oct 08, 2026 at 02:30:06PM +0800, Cen Zhang wrote:
> keyctl_describe_key() must keep the key type's name alive until
> kasprintf() has consumed it. The retained key reference keeps the key
> and its description alive, but does not pin the module providing its
> type. The name is passed to kasprintf() without holding key->sem.
>
> kvasprintf() uses the saved name pointer in two formatting passes, with
> a GFP_KERNEL allocation between them. With AF_RXRPC=m, a task that
> passes View permission before type retirement can overlap a privileged
> module unload in this order:
>
> 1. KEYCTL_DESCRIBE looks up the key, saves key->type->name in the
> kasprintf() arguments and completes the first formatting pass.
> 2. While the formatter is delayed before its second pass,
> af_rxrpc_exit() calls unregister_key_type(), which removes the type
> from the registry and waits for key_gc_keytype().
> 3. The collector takes key->sem for writing, retypes the retained key
> to key_type_dead and completes retirement. Unregistration and module
> exit return, allowing free_module() to release the type and name.
> 4. The formatter resumes its second pass and reads the saved name from
> released module storage, which can fault in string().
>
> Hold key->sem for reading across kasprintf(). The collector then cannot
> retype the key or complete retirement until both formatting passes have
> finished. If retirement wins the lock first, formatting uses the core
> key_type_dead name instead. Release the semaphore immediately after
> kasprintf(), including on allocation failure, before copying to
> userspace.
>
> Oops report as below:
Just a small nit. Cut just the snippet of the report that is necessary.
>
> BUG: unable to handle page fault for address: fffffbfff8054794
> #PF: supervisor read access in kernel mode
> #PF: error_code(0x0000) - not-present page
> PGD 1a7ff6067 P4D 1a7ff6067 PUD 1a7ff2067 PMD 100b0b067 PTE 0
> Oops: Oops: 0000 [#1] SMP KASAN NOPTI
> CPU: 0 UID: 0 PID: 500 Comm: key-fixture Tainted: G O 7.2.0-rc5-pmb-bt-functional-v1+ #1 PREEMPT(lazy)
> Tainted: [O]=OOT_MODULE
> Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
> RIP: 0010:string+0x23f/0x470
> Code: 48 8b 04 24 48 83 c3 01 41 83 c6 01 48 39 c5 74 34 e8 f5 2e 5e fb 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 38 38 d0 7f 08 84 c0 0f 85 d6 01 00 00 44 0f b6 65 ff
> RSP: 0018:ffff888116307b80 EFLAGS: 00010246
> RAX: 1ffffffff8054794 RBX: ffff88810a4a52c0 RCX: ffffffff8626be7b
> RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffc02a3ca0
> RBP: ffffffffc02a3ca1 R08: 0000000000000001 R09: 0000000000000001
> R10: ffffffff893cfe57 R11: ffff88811404d700 R12: 00000000ffffffff
> R13: ffff88810a4a52d4 R14: 0000000000000000 R15: dffffc0000000000
> FS: 00007fad30f2a780(0000) GS:ffff8881fd7d6000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: fffffbfff8054794 CR3: 0000000104fb7004 CR4: 0000000000770ef0
> PKRU: 55555554
> Call Trace:
> <TASK>
> ? __pfx_string+0x10/0x10
> vsnprintf+0x330/0x1110
I would cut away the rest (what follows).
> ? pmbd_probe_hit_cookie+0xee/0x1c0
> ? __pfx_vsnprintf+0x10/0x10
> ? srso_alias_return_thunk+0x5/0xfbef5
> ? kasprintf+0xc7/0x100
> kvasprintf+0xe4/0x1a0
> ? __pfx_kvasprintf+0x10/0x10
> ? pmbd_gate_site_armed+0x14e/0x1c0
> ? pmbd_site_is_armed+0xa1/0xd0
> ? srso_alias_return_thunk+0x5/0xfbef5
> ? map_id_range_up+0x286/0x370
> kasprintf+0xc7/0x100
> ? __pfx_kasprintf+0x10/0x10
> ? srso_alias_return_thunk+0x5/0xfbef5
> ? from_kuid_munged+0xa3/0x130
> ? __pfx_from_kuid_munged+0x10/0x10
> keyctl_describe_key+0x26d/0x600
> __do_sys_keyctl+0x2ed/0x4f0
> do_syscall_64+0x115/0x6a0
> entry_SYSCALL_64_after_hwframe+0x77/0x7f
> RIP: 0033:0x7fad3103b7b9
> Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 66 0d 00 f7 d8 64 89 01 48
> RSP: 002b:00007ffeda509798 EFLAGS: 00000246 ORIG_RAX: 00000000000000fa
> RAX: ffffffffffffffda RBX: 000000000b61be23 RCX: 00007fad3103b7b9
> RDX: 00007ffeda5097a0 RSI: 000000000b61be23 RDI: 0000000000000006
> RBP: 00007ffeda5097a0 R08: 0000000000000000 R09: 0000000000000000
> R10: 0000000000000200 R11: 0000000000000246 R12: 0000000000000000
> R13: 00007ffeda509b90 R14: 00007fad31168000 R15: 000055ba831cdd08
> </TASK>
> Modules linked in: [last unloaded: rxrpc(O)]
> CR2: fffffbfff8054794
> ---[ end trace 0000000000000000 ]---
>
> Fixes: aa9d4437893f ("KEYS: Fix the size of the key description passed to/from userspace")
> Assisted-by: LLM
> Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
> ---
>
> diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
> index d14ace88e529cb77de5386f1f3a99905d4b7688c..5a5efa26ed0ece3a5ab22e37ad7bda7a5a744b83 100644
> --- a/security/keys/keyctl.c
> +++ b/security/keys/keyctl.c
> @@ -677,12 +677,14 @@ long keyctl_describe_key(key_serial_t keyid,
>
> /* calculate how much information we're going to return */
> ret = -ENOMEM;
> + down_read(&key->sem);
> infobuf = kasprintf(GFP_KERNEL,
> "%s;%d;%d;%08x;",
> key->type->name,
> from_kuid_munged(current_user_ns(), key->uid),
> from_kgid_munged(current_user_ns(), key->gid),
> key->perm);
> + up_read(&key->sem);
> if (!infobuf)
> goto error2;
> infolen = strlen(infobuf);
Br, Jarkko
next prev parent reply other threads:[~2026-10-08 17:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-08 6:30 [PATCH] keys: Protect the type name while describing a key Cen Zhang
2026-10-08 6:41 ` sashiko-bot
2026-10-08 17:56 ` Jarkko Sakkinen [this message]
2026-10-09 5:07 ` Cen Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=asfZMToWNmQDTk4W@kernel.org \
--to=jarkko@kernel.org \
--cc=baijiaju1990@gmail.com \
--cc=dhowells@redhat.com \
--cc=jjzuming@gmail.com \
--cc=jmorris@namei.org \
--cc=keyrings@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
--cc=paul@paul-moore.com \
--cc=serge@hallyn.com \
--cc=zzzccc427@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.