From: Vincent Jardin <vjardin@free.fr>
To: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: u-boot@lists.u-boot-project.org,
Priyanka Jain <priyanka.jain@nxp.com>,
Wasim Khan <wasim.khan@nxp.com>, Tom Rini <trini@konsulko.com>,
Peng Fan <peng.fan@nxp.com>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Hemant Agrawal <hemant.agrawal@nxp.com>,
Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Subject: Re: [PATCH v6 12/13] doc: lx2160a: document the sd1 hwconfig option
Date: Fri, 9 Oct 2026 00:36:26 +0200 [thread overview]
Message-ID: <asga6m8Voff3NFtf@L30177.local> (raw)
In-Reply-To: <20261007104737.siyopctt5alyeehz@skbuf>
Hi Vladimir,
> 2x40g should have the "SRDS_PRTCL_S1" field as "13 or 20" as well, no?
> Because protocol 20 is literally 2x40g.
right -> v7
> Why "of protocol 13"? You could simply say "Active DPMACs for each mode:"
ok
> For clarity, I would recommend one more column
thanks, I'll take your recommendation with the template from your former
email.
> Also, I think a clarification is in order, that your SerDes1 protocol
> naming convention needs to be read from right to left, compared to the
> SRDS_PRTCL_S1 table from the hardware RM.
Right, and it is good to mention it since I had face that issue.
I'll comment it into the v7.
Best regards,
Vincent
next prev parent reply other threads:[~2026-10-08 22:36 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-01 20:47 [PATCH v6 00/13] board: lx2160a: runtime SD 1 lane configuration for LX2160A boards Vincent Jardin
2026-10-01 20:47 ` [PATCH v6 01/13] board: lx2160a: serdes: drop the split subcommand Vincent Jardin
2026-10-01 20:47 ` [PATCH v6 02/13] board: lx2160a: serdes: rename serdes1:split to serdes1:100g4x25g Vincent Jardin
2026-10-01 20:47 ` [PATCH v6 03/13] board: lx2160a: serdes: rename SPLIT_POLL_US to SRDS_POLL_US Vincent Jardin
2026-10-01 20:47 ` [PATCH v6 04/13] board: lx2160a: serdes: move the SD1 halt and reset into helpers Vincent Jardin
2026-10-01 20:47 ` [PATCH v6 05/13] board: lx2160a: serdes: set SD1 with a table Vincent Jardin
2026-10-01 20:47 ` [PATCH v6 06/13] board: lx2160a: serdes: report unknown SD1 cases Vincent Jardin
2026-10-01 20:47 ` [PATCH v6 07/13] board: lx2160a: serdes: no SD1 config once MC runs Vincent Jardin
2026-10-01 20:47 ` [PATCH v6 08/13] board: lx2160a: serdes: add serdes1:2x40g Vincent Jardin
2026-10-02 14:07 ` Vladimir Oltean
2026-10-06 14:10 ` Vincent Jardin
2026-10-01 20:47 ` [PATCH v6 09/13] board: lx2160a: serdes: enter a SD1 mode through the mode it starts from Vincent Jardin
2026-10-02 14:08 ` Vladimir Oltean
2026-10-01 20:47 ` [PATCH v6 10/13] board: lx2160a: serdes: add serdes1:40g4x10g Vincent Jardin
2026-10-07 11:27 ` Vladimir Oltean
2026-10-08 22:32 ` Vincent Jardin
2026-10-01 20:47 ` [PATCH v6 11/13] board: lx2160a: serdes: add serdes1:100g4x10g Vincent Jardin
2026-10-01 20:47 ` [PATCH v6 12/13] doc: lx2160a: document the sd1 hwconfig option Vincent Jardin
2026-10-07 10:47 ` Vladimir Oltean
2026-10-08 22:36 ` Vincent Jardin [this message]
2026-10-01 20:47 ` [PATCH v6 13/13] board: nbxv3: apply sd1 hwconfig before MC starts Vincent Jardin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=asga6m8Voff3NFtf@L30177.local \
--to=vjardin@free.fr \
--cc=hemant.agrawal@nxp.com \
--cc=ioana.ciornei@nxp.com \
--cc=meenakshi.aggarwal@nxp.com \
--cc=peng.fan@nxp.com \
--cc=priyanka.jain@nxp.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.u-boot-project.org \
--cc=vladimir.oltean@nxp.com \
--cc=wasim.khan@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.