All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: Linus Walleij <linusw@kernel.org>,
	Bartosz Golaszewski <brgl@kernel.org>,
	Frank Li <Frank.Li@nxp.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Shenwei Wang <shenwei.wang@nxp.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	linux-gpio@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH v5 07/13] gpio: mxc: convert pad wakeup compatible checks to hwdata flags
Date: Fri, 9 Oct 2026 13:45:44 -0500	[thread overview]
Message-ID: <ask2WA3tzibGhXEr@SMW015318> (raw)
In-Reply-To: <20261010-gpio-mxc-cleanup-v5-7-1e59e6ddfa00@nxp.com>

On Sat, Oct 10, 2026 at 02:05:28AM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> mxc_gpio_generic_config() and mxc_gpio_set_pad_wakeup() call
> of_device_is_compatible() on every invocation to determine pad wakeup
> capability and i.MX8QM-specific behavior.  These properties are
> invariant for the lifetime of the device.
>
> Extend the hwdata flags scheme introduced in the previous commit with
> MXC_GPIO_HAS_PAD_WAKEUP and MXC_GPIO_FALL_EDGE_WAKEUP_BROKEN, adding
> dedicated hwdata instances for imx8qm and imx8qxp (also used by imx8dxl).
> This replaces the repeated device tree string comparisons in the
> suspend/resume path with simple flag tests on static per-compatible
> data.
>
> While at it, clean up mxc_gpio_generic_config() to use a local ret
> variable for clarity instead of the == 0 comparison.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  drivers/gpio/gpio-mxc.c | 46 ++++++++++++++++++++++++++++++++++------------
>  1 file changed, 34 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
> index 1a35b23747b4..70fa139338c9 100644
> --- a/drivers/gpio/gpio-mxc.c
> +++ b/drivers/gpio/gpio-mxc.c
> @@ -34,6 +34,8 @@
>  #define IMX_SCU_WAKEUP_HIGH_LVL		7
>
>  #define MXC_GPIO_HAS_POWER_OFF		BIT(0)
> +#define MXC_GPIO_HAS_PAD_WAKEUP		BIT(1)
> +#define MXC_GPIO_FALL_EDGE_WAKEUP_BROKEN BIT(2)
>
>  /* device type dependent stuff */
>  struct mxc_gpio_hwdata {
> @@ -132,6 +134,26 @@ static struct mxc_gpio_hwdata imx7d_gpio_hwdata = {
>  	.flags = MXC_GPIO_HAS_POWER_OFF,
>  };
>
> +static struct mxc_gpio_hwdata imx8qm_gpio_hwdata = {
> +	MXC_GPIO_HW_DATA_COMMON,
> +	.flags = MXC_GPIO_FALL_EDGE_WAKEUP_BROKEN | MXC_GPIO_HAS_PAD_WAKEUP,
> +};
> +
> +static struct mxc_gpio_hwdata imx8qxp_gpio_hwdata = {
> +	MXC_GPIO_HW_DATA_COMMON,
> +	.flags = MXC_GPIO_HAS_PAD_WAKEUP,
> +};
> +
> +static inline bool mxc_gpio_fall_edge_wakeup_broken(struct mxc_gpio_port *port)
> +{
> +	return port->hwdata->flags & MXC_GPIO_FALL_EDGE_WAKEUP_BROKEN;
> +}
> +
> +static inline bool mxc_gpio_has_pad_wakeup(struct mxc_gpio_port *port)
> +{
> +	return port->hwdata->flags & MXC_GPIO_HAS_PAD_WAKEUP;
> +}
> +
>  static inline bool mxc_gpio_has_power_off(struct mxc_gpio_port *port)
>  {
>  	return port->hwdata->flags & MXC_GPIO_HAS_POWER_OFF;
> @@ -158,9 +180,9 @@ static const struct of_device_id mxc_gpio_dt_ids[] = {
>  	{ .compatible = "fsl,imx31-gpio", .data = &imx31_gpio_hwdata },
>  	{ .compatible = "fsl,imx35-gpio", .data = &imx35_gpio_hwdata },
>  	{ .compatible = "fsl,imx7d-gpio", .data = &imx7d_gpio_hwdata },
> -	{ .compatible = "fsl,imx8dxl-gpio", .data = &imx35_gpio_hwdata },
> -	{ .compatible = "fsl,imx8qm-gpio", .data = &imx35_gpio_hwdata },
> -	{ .compatible = "fsl,imx8qxp-gpio", .data = &imx35_gpio_hwdata },
> +	{ .compatible = "fsl,imx8dxl-gpio", .data = &imx8qxp_gpio_hwdata },
> +	{ .compatible = "fsl,imx8qm-gpio", .data = &imx8qm_gpio_hwdata },
> +	{ .compatible = "fsl,imx8qxp-gpio", .data = &imx8qxp_gpio_hwdata },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, mxc_gpio_dt_ids);
> @@ -575,15 +597,16 @@ static void mxc_gpio_restore_regs(struct mxc_gpio_port *port)
>  static bool mxc_gpio_generic_config(struct mxc_gpio_port *port,
>  		unsigned int offset, unsigned long conf)
>  {
> -	struct device_node *np = port->dev->of_node;
> +	int ret;
> +
> +	if (!mxc_gpio_has_pad_wakeup(port))
> +		return false;
>
> -	if (of_device_is_compatible(np, "fsl,imx8dxl-gpio") ||
> -	    of_device_is_compatible(np, "fsl,imx8qxp-gpio") ||
> -	    of_device_is_compatible(np, "fsl,imx8qm-gpio"))
> -		return (gpiochip_generic_config(&port->gen_gc.gc,
> -						offset, conf) == 0);
> +	ret = gpiochip_generic_config(&port->gen_gc.gc, offset, conf);
> +	if (ret)
> +		return false;
>
> -	return false;
> +	return true;
>  }
>
>  static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable)
> @@ -591,7 +614,6 @@ static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable)
>  	unsigned long config;
>  	bool ret = false;
>  	int i, type;
> -	bool is_imx8qm = of_device_is_compatible(port->dev->of_node, "fsl,imx8qm-gpio");
>
>  	static const u32 pad_type_map[] = {
>  		IMX_SCU_WAKEUP_OFF,		/* 0 */
> @@ -612,7 +634,7 @@ static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable)
>  		else
>  			config = IMX_SCU_WAKEUP_OFF;
>
> -		if (is_imx8qm && config == IMX_SCU_WAKEUP_FALL_EDGE) {
> +		if (mxc_gpio_fall_edge_wakeup_broken(port) && config == IMX_SCU_WAKEUP_FALL_EDGE) {
>  			dev_warn_once(port->dev,
>  				      "No falling-edge support for wakeup on i.MX8QM\n");
>  			config = IMX_SCU_WAKEUP_OFF;
>
> --
> 2.51.0
>
>

  reply	other threads:[~2026-10-09 18:45 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-09 18:05 [PATCH v5 00/13] gpio: mxc: bug fixes and probe cleanup Peng Fan (OSS)
2026-10-09 18:05 ` [PATCH v5 01/13] gpio: mxc: fix race between chained IRQ handler install and probe completion Peng Fan (OSS)
2026-10-09 18:22   ` sashiko-bot
2026-10-09 18:29   ` Frank Li
2026-10-09 18:05 ` [PATCH v5 02/13] gpio: mxc: fix both_edges bit operations Peng Fan (OSS)
2026-10-09 18:33   ` Frank Li
2026-10-09 18:05 ` [PATCH v5 03/13] gpio: mxc: fix wakeup_pads " Peng Fan (OSS)
2026-10-09 18:35   ` Frank Li
2026-10-09 18:05 ` [PATCH v5 04/13] gpio: mxc: simplify gpio_set_wake_irq Peng Fan (OSS)
2026-10-09 18:39   ` Frank Li
2026-10-09 18:05 ` [PATCH v5 05/13] gpio: mxc: use for_each_set_bit() to iterate wakeup pads Peng Fan (OSS)
2026-10-09 18:05 ` [PATCH v5 06/13] gpio: mxc: replace of_device_is_compatible() with hwdata flags Peng Fan (OSS)
2026-10-09 18:05 ` [PATCH v5 07/13] gpio: mxc: convert pad wakeup compatible checks to " Peng Fan (OSS)
2026-10-09 18:45   ` Frank Li [this message]
2026-10-09 18:05 ` [PATCH v5 08/13] gpio: mxc: use local dev variable Peng Fan (OSS)
2026-10-09 18:05 ` [PATCH v5 09/13] gpio: mxc: use cleanup guard for pm_runtime_get_noresume() balance Peng Fan (OSS)
2026-10-09 18:19   ` sashiko-bot
2026-10-09 18:51   ` Frank Li
2026-10-11 11:38     ` Peng Fan
2026-10-09 18:05 ` [PATCH v5 10/13] gpio: mxc: convert probe error handling to devres Peng Fan (OSS)
2026-10-09 18:23   ` sashiko-bot
2026-10-09 18:53   ` Frank Li
2026-10-09 18:05 ` [PATCH v5 11/13] gpio: mxc: switch probe error paths to dev_err_probe() Peng Fan (OSS)
2026-10-09 18:21   ` sashiko-bot
2026-10-09 18:55   ` Frank Li
2026-10-09 18:05 ` [PATCH v5 12/13] gpio: mxc: introduce MXC_ICR macros and use field_prep/field_get Peng Fan (OSS)
2026-10-09 18:58   ` Frank Li
2026-10-09 18:05 ` [PATCH v5 13/13] gpio: mxc: use BIT() macro for single-bit operations Peng Fan (OSS)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ask2WA3tzibGhXEr@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=brgl@kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=peng.fan@oss.nxp.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shenwei.wang@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.