From: Harry Yoo <harry@kernel.org>
To: "Vlastimil Babka (SUSE)" <vbabka@kernel.org>
Cc: Imre Kaloz <kaloz@kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Hao Li <hao.li@linux.dev>, Christoph Lameter <cl@gentwo.org>,
David Rientjes <rientjes@google.com>,
Roman Gushchin <roman.gushchin@linux.dev>,
Jann Horn <jannh@google.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org,
"Jose A . Perez de Azpillaga" <azpijr@gmail.com>
Subject: Re: [PATCH v2] mm/slab: sample slab_state once in kmem_cache_destroy()
Date: Thu, 15 Oct 2026 15:48:10 +0100 [thread overview]
Message-ID: <atDCYwNfKW3m6YXh@thinkstation> (raw)
In-Reply-To: <d966f16a-a2be-48c7-b31a-a2c7d3ef6d5c@kernel.org>
On Thu, Oct 15, 2026 at 09:21:43AM +0200, Vlastimil Babka (SUSE) wrote:
> On 10/14/26 17:08, Imre Kaloz wrote:
> > kmem_cache_release() tests slab_state >= FULL after kmem_cache_destroy()
> > has dropped slab_mutex and unlinked the cache, and for a
> > SLAB_TYPESAFE_BY_RCU cache after rcu_barrier(). If slab_late_init() runs
> > before that test it sets slab_state to FULL but skips the unlinked cache,
> > which never got a sysfs entry, so sysfs_slab_release() calls kobject_put()
> > on a kobject that was never initialized:
> >
> > WARNING: lib/kobject.c:734 at kobject_put+0x64/0x2c0, CPU#1: kworker/u8:3/55
> > kobject: '(null)' ((____ptrval____)): is not initialized, yet kobject_put() is being called.
> > refcount_t: underflow; use-after-free.
> > kobject_put+0x64/0x2c0
> > sysfs_slab_release+0xc/0x20
> > kmem_cache_destroy+0x104/0x1e0
> > bioset_exit+0x13c/0x1e0
> > disk_release+0x54/0x140
> > put_disk+0x18/0x40
> > floppy_async_init+0xbec/0xd10
> >
> > The release-time test has run outside slab_mutex since at least v4.4 for
> > SLAB_TYPESAFE_BY_RCU caches, and since v6.0 for the others. Since v6.12
> > the unlink-time test in kmem_cache_destroy() is a separate read of its
> > own, also after mutex_unlock(), so the two can disagree. Both tests ask
>
> It would be useful to mention the commits here along with the versions. Also
> this suggests 3 commits but there's only 2 in Fixes.
Agreed.
At second look I think we should improve the changelog a bit....
And the history of this race is really... messy.
I'll just rewrite this part a little bit with specific commits and
add Fixes: tags for each commit that introduced for re-introduced
the commit, along with some history so that people* can decide whether
they* should pick this up.
*who may maintain downstream stable Linux kernels
> > the unlink-time test in kmem_cache_destroy() is a separate read of its
> > own, also after mutex_unlock(), so the two can disagree.
This part is unnecessary because reading slab_state outside
slab_mutex is what we should fix. As long as it's read under
slab_mutex, reading it once or twice doesn't really matter.
(See full changelog at the end of this email)
> I would guess the 6.0 change is not a crucial one?
Uh, I thought the Fixes: was 6.0 one, not 6.12 one :/
> Reviewed-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Thanks!
So... below is my suggestion. What do you think?
commit 13564e1cfc847aa540019b55a1f8e588670892fe
Author: Imre Kaloz <kaloz@kernel.org>
Date: Wed Oct 14 17:08:43 2026 +0200
mm/slab: sample slab_state once in kmem_cache_destroy()
kmem_cache_release() tests slab_state >= FULL after kmem_cache_destroy()
has dropped slab_mutex and unlinked the cache, and for a
SLAB_TYPESAFE_BY_RCU cache after rcu_barrier(). If slab_late_init() runs
before that test it sets slab_state to FULL but skips the unlinked cache,
which never got a sysfs entry, so sysfs_slab_release() calls kobject_put()
on a kobject that was never initialized:
WARNING: lib/kobject.c:734 at kobject_put+0x64/0x2c0, CPU#1: kworker/u8:3/55
kobject: '(null)' ((____ptrval____)): is not initialized, yet kobject_put() is being called.
refcount_t: underflow; use-after-free.
kobject_put+0x64/0x2c0
sysfs_slab_release+0xc/0x20
kmem_cache_destroy+0x104/0x1e0
bioset_exit+0x13c/0x1e0
disk_release+0x54/0x140
put_disk+0x18/0x40
floppy_async_init+0xbec/0xd10
slab_state >= FULL asks whether the cache has a kobject, which cache
creation skips while slab_state <= UP. UP is the state just below FULL,
so a false sample cannot skip a kobject_put() that was owed.
Seen on sparc64 at boot, where the asynchronous floppy init tears down
its bio slab while the late initcalls are running.
Sample slab_state once, under slab_mutex which slab_late_init() holds
when it sets FULL, and use the result for both the unlink and the
release.
The history of this problem dates back to v3.2:
Commit 69cb8e6b7c29 ("slub: free slabs without holding locks") in
v3.2 moved sysfs_slab_remove() outside slub_lock and introduced
a race condition between kmem_cache_destroy() and slab_sysfs_init().
Commit 945cf2b6199be ("mm/sl[aou]b: Extract a common function for
kmem_cache_destroy") in v3.7 accidentally closed the race while
extracting a common implementation for kmem_cache_destroy().
Commit 5413dfba88d6 ("slub: drop mutex before deleting sysfs entry")
in v3.8 re-opened the race by dropping slab_mutex around
sysfs_slab_remove() in __kmem_cache_shutdown(), to avoid a lockdep
splat between slab_mutex and the sysfs lock.
Commit 657dc2f97220 ("slab: remove synchronous rcu_barrier() call in
memcg cache release path") in v4.11 shifted from synchronous
rcu_barrier() to asynchronous RCU work for SLAB_TYPESAFE_BY_RCU caches.
That commit, again, accidentally closed the race by moving
sysfs_slab_release() to shutdown_cache(), but only for
!SLAB_TYPESAFE_BY_RCU caches because destruction of
SLAB_TYPESAFE_BY_RCU caches is done in an RCU work.
Commit 0495e337b703 ("mm/slab_common: Deleting kobject in
kmem_cache_destroy() without holding slab_mutex/cpu_hotplug_lock") in
v6.0 re-introduced the race for !SLAB_TYPESAFE_BY_RCU caches.
Fixes: 69cb8e6b7c29 ("slub: free slabs without holding locks")
Fixes: 5413dfba88d6 ("slub: drop mutex before deleting sysfs entry")
Fixes: 0495e337b703 ("mm/slab_common: Deleting kobject in kmem_cache_destroy() without holding slab_mutex/cpu_hotplug_lock")
Cc: stable@vger.kernel.org
Signed-off-by: Imre Kaloz <kaloz@kernel.org>
Reviewed-by: Jose A. Perez de Azpillaga <azpijr@gmail.com>
Reviewed-by: Harry Yoo (Meta) <harry@kernel.org>
Link: https://patch.msgid.link/20261014150844.8536-1-kaloz@kernel.org
Reviewed-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Harry Yoo (Meta) <harry@kernel.org>
--
Cheers,
Harry / Hyeonggon
next prev parent reply other threads:[~2026-10-15 14:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-14 15:08 [PATCH v2] mm/slab: sample slab_state once in kmem_cache_destroy() Imre Kaloz
2026-10-14 19:46 ` Harry Yoo
2026-10-14 19:59 ` Harry Yoo
2026-10-14 19:54 ` Harry Yoo (Meta)
2026-10-15 7:21 ` Vlastimil Babka (SUSE)
2026-10-15 14:48 ` Harry Yoo [this message]
2026-10-15 16:13 ` Vlastimil Babka (SUSE)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=atDCYwNfKW3m6YXh@thinkstation \
--to=harry@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=azpijr@gmail.com \
--cc=cl@gentwo.org \
--cc=hao.li@linux.dev \
--cc=jannh@google.com \
--cc=kaloz@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=rientjes@google.com \
--cc=roman.gushchin@linux.dev \
--cc=stable@vger.kernel.org \
--cc=vbabka@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.