All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Yosry Ahmed <yosry@kernel.org>
Cc: Jim Mattson <jmattson@google.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	 Maxim Levitsky <mlevitsk@redhat.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	 Tom Lendacky <thomas.lendacky@amd.com>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 24/27] KVM: nSVM: Flush L2's ASID when emulating INVLPGA
Date: Thu, 15 Oct 2026 17:53:40 -0700	[thread overview]
Message-ID: <atF1lByf9w3Pvzyt@google.com> (raw)
In-Reply-To: <CAO9r8zMt5ZNwr3Y+NfFcAW5Cf4JaerCScSsLxcvsvHYR=DoYBw@mail.gmail.com>

On Thu, Oct 15, 2026, Yosry Ahmed wrote:
> On Thu, Oct 15, 2026 at 4:37 PM Jim Mattson <jmattson@google.com> wrote:
> > > diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
> > > index 8f2542357e78d..436d13f106369 100644
> > > --- a/arch/x86/kvm/svm/svm.c
> > > +++ b/arch/x86/kvm/svm/svm.c
> > > @@ -2468,17 +2468,61 @@ static int clgi_interception(struct kvm_vcpu *vcpu)
> > >
> > >  static int invlpga_interception(struct kvm_vcpu *vcpu)
> > >  {
> > > +       struct vcpu_svm *svm = to_svm(vcpu);
> > >         /* FIXME: Handle an address size prefix. */
> > >         gva_t gva = kvm_rax_read(vcpu);
> > >         u32 asid = kvm_ecx_read(vcpu);
> > > +       int cpu;
> > >
> > >         if (nested_svm_check_permissions(vcpu))
> > >                 return 1;
> > >
> > >         trace_kvm_invlpga(to_svm(vcpu)->vmcb->save.rip, asid, gva);
> > >
> > > -       /* Let's treat INVLPGA the same as INVLPG (can be optimized!) */
> > > -       kvm_mmu_invlpg(vcpu, gva);
> > > +       /*
> > > +        * INVLPG on a non-canonical address is a NOP according to the SDM,
> > > +        * assume the same behavior from INVLPGA since the APM doesn't specify.
> > > +        */
> > > +       if (is_noncanonical_invlpg_address(gva, vcpu))
> > > +               return kvm_skip_emulated_instruction(vcpu);
> >
> > If L1 is in 32-bit mode with junk in RAX[63:32] (e.g. bits left over
> > from long mode), the full 64-bit value may not be canonical. Should
> > the kvm_rax_read(vcpu) above be kvm_register_read(vcpu,
> > VCPU_REGS_RAX)?
> 
> Doesn't kvm_rax_read() already use kvm_reg_mode_mask() as per
> __BUILD_KVM_GPR_ACCESSORS()?

Yes, Jim's probably thinking of older kernels before fc40b1254c32 ("KVM: x86: Add
mode-aware versions of kvm_<reg>_{read,write}() helpers").

  reply	other threads:[~2026-10-16  0:53 UTC|newest]

Thread overview: 80+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-12 23:36 [PATCH v3 00/27] KVM: nSVM: Optimize nSVM TLB flushes Yosry Ahmed
2026-10-12 23:36 ` [PATCH v3 01/27] KVM: nSVM: Flush the TLB after forcefully leaving nested Yosry Ahmed
2026-10-14 15:02   ` Jim Mattson
2026-10-14 15:18     ` Yosry Ahmed
2026-10-12 23:36 ` [PATCH v3 02/27] KVM: SVM: Document number of ASIDs CPUID setting Yosry Ahmed
2026-10-14 15:07   ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 03/27] KVM: VMX: Generalize VPID allocation to be vendor-neutral Yosry Ahmed
2026-10-14 18:22   ` Jim Mattson
2026-10-14 20:38     ` Yosry Ahmed
2026-10-12 23:36 ` [PATCH v3 04/27] KVM: x86/mmu: Support specifying reserved TLB tags Yosry Ahmed
2026-10-14 21:49   ` Jim Mattson
2026-10-14 22:07     ` Yosry Ahmed
2026-10-12 23:36 ` [PATCH v3 05/27] KVM: SVM: Add helpers to set/clear ASID flush in VMCB Yosry Ahmed
2026-10-14 22:00   ` Jim Mattson
2026-10-14 22:03     ` Yosry Ahmed
2026-10-14 22:22       ` Jim Mattson
2026-10-14 22:25         ` Yosry Ahmed
2026-10-14 22:32           ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 06/27] KVM: SVM: Fallback to flush everything if FLUSHBYASID is not available Yosry Ahmed
2026-10-14 22:45   ` Jim Mattson
2026-10-14 22:50     ` Yosry Ahmed
2026-10-14 23:27       ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 07/27] KVM: SEV: Do ASID initialization at VMCB initialization Yosry Ahmed
2026-10-14 23:31   ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 08/27] KVM: SEV: Expose sev_get_asid() outside of sev.c Yosry Ahmed
2026-10-14 23:33   ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 09/27] KVM: SEV: Explicitly initialize the per vCPU ASID on SEV VM migration Yosry Ahmed
2026-10-14 23:35   ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 10/27] KVM: SVM: Use a static ASID per vCPU Yosry Ahmed
2026-10-12 23:54   ` sashiko-bot
2026-10-12 23:55     ` Yosry Ahmed
2026-10-12 23:36 ` [PATCH v3 11/27] KVM: SVM: Only flush the fallback ASID when used by a different vCPU Yosry Ahmed
2026-10-15 21:44   ` Jim Mattson
2026-10-15 22:03     ` Yosry Ahmed
2026-10-12 23:36 ` [PATCH v3 12/27] KVM: nSVM: Drop svm->nested.initialized Yosry Ahmed
2026-10-15 21:48   ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 13/27] KVM: nSVM: Add a placeholder ASID for L2 Yosry Ahmed
2026-10-13  0:01   ` sashiko-bot
2026-10-13 14:25     ` Yosry Ahmed
2026-10-15 21:55   ` Jim Mattson
2026-10-15 22:10     ` Yosry Ahmed
2026-10-15 22:21       ` Jim Mattson
2026-10-15 22:27         ` Yosry Ahmed
2026-10-12 23:36 ` [PATCH v3 14/27] KVM: x86: hyper-v: Rename kvm_hv_vcpu_purge_flush_tlb() Yosry Ahmed
2026-10-15 21:58   ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 15/27] KVM: x86: hyper-v: Allow purging all TLB flush FIFOs Yosry Ahmed
2026-10-12 23:56   ` sashiko-bot
2026-10-13 14:42     ` Yosry Ahmed
2026-10-15 22:02   ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 16/27] KVM: nSVM: Flush both L1 and L2 ASIDs on KVM_REQ_TLB_FLUSH Yosry Ahmed
2026-10-15 22:05   ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 17/27] KVM: nSVM: Always switch VMCB before leaving guest mode Yosry Ahmed
2026-10-15 22:08   ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 18/27] KVM: nSVM: Split nested_svm_transition_tlb_flush() into entry/exit fns Yosry Ahmed
2026-10-15 22:10   ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 19/27] KVM: nSVM: Service local TLB flushes before nested transitions Yosry Ahmed
2026-10-15 22:19   ` Jim Mattson
2026-10-15 22:34     ` Yosry Ahmed
2026-10-12 23:36 ` [PATCH v3 20/27] KVM: x86: Add KVM_REQ_MMU_SYNC_ALL_ROOTS Yosry Ahmed
2026-10-15 22:24   ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 21/27] KVM: nSVM: Handle nested TLB flush requests through TLB_CONTROL Yosry Ahmed
2026-10-15 22:33   ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 22/27] KVM: nSVM: Flush the TLB if L1 changes L2's ASID in vmcb12 Yosry Ahmed
2026-10-15 23:09   ` Jim Mattson
2026-10-15 23:20     ` Yosry Ahmed
2026-10-15 23:50       ` Jim Mattson
2026-10-15 23:56         ` Yosry Ahmed
2026-10-12 23:36 ` [PATCH v3 23/27] KVM: nSVM: Do not reset TLB_CONTROL in vmcb02 on nested VM-Enter Yosry Ahmed
2026-10-15 23:16   ` Jim Mattson
2026-10-15 23:22     ` Yosry Ahmed
2026-10-12 23:36 ` [PATCH v3 24/27] KVM: nSVM: Flush L2's ASID when emulating INVLPGA Yosry Ahmed
2026-10-15 23:37   ` Jim Mattson
2026-10-15 23:42     ` Yosry Ahmed
2026-10-16  0:53       ` Sean Christopherson [this message]
2026-10-12 23:36 ` [PATCH v3 25/27] KVM: nSVM: Flush the ASID on nested transitions if shared by L1 and L2 Yosry Ahmed
2026-10-15 23:42   ` Jim Mattson
2026-10-12 23:36 ` [PATCH v3 26/27] KVM: nSVM: Use different ASIDs for " Yosry Ahmed
2026-10-12 23:36 ` [PATCH v3 27/27] KVM: selftests: Add a test for nested TLB flushes Yosry Ahmed
2026-10-14 13:23 ` [PATCH v3 00/27] KVM: nSVM: Optimize nSVM " Jim Mattson
2026-10-14 14:37   ` Yosry Ahmed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=atF1lByf9w3Pvzyt@google.com \
    --to=seanjc@google.com \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=thomas.lendacky@amd.com \
    --cc=vkuznets@redhat.com \
    --cc=yosry@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.