From: Tzung-Bi Shih <tzungbi@kernel.org>
To: Guenter Roeck <linux@roeck-us.net>
Cc: linux-watchdog@vger.kernel.org,
Xingyu Wu <xingyu.wu@starfivetech.com>,
Ziv Xu <ziv.xu@starfivetech.com>
Subject: Re: [PATCH v2 8/8] watchdog: starfive-wdt: Avoid unclocked MMIO access in starfive_wdt_set_timeout()
Date: Fri, 6 Nov 2026 14:21:33 +0000 [thread overview]
Message-ID: <au3ibSdPUIKvUWNa@google.com> (raw)
In-Reply-To: <20261105190530.2371854-9-linux@roeck-us.net>
On Thu, Nov 05, 2026 at 11:05:29AM -0800, Guenter Roeck wrote:
> Only program the hardware registers in starfive_wdt_set_timeout() when
> watchdog_hw_running() is set. In addition, reload the initial counter value
> via starfive_wdt_set_reload_count() in starfive_wdt_start() (preserving
Is the additional change relevant to this patch (i.e., avoid unclocked
MMIO access)?
> wdt->reload on resume) so JH7100 loads the configured timeout into the
> counter when started from probe or after WDIOS_DISABLECARD.
Is it really JH7100 specific (not for JH7110)?
> @@ -344,7 +344,7 @@ static int starfive_wdt_keepalive(struct watchdog_device *wdd)
> return ret;
> }
>
> -static int starfive_wdt_start(struct starfive_wdt *wdt)
> +static int starfive_wdt_start(struct starfive_wdt *wdt, u32 count)
> {
> int ret;
>
> @@ -357,7 +357,9 @@ static int starfive_wdt_start(struct starfive_wdt *wdt)
> if (ret)
> goto exit;
>
> - starfive_wdt_set_count(wdt, wdt->count);
> + starfive_wdt_set_reload_count(wdt, count);
> + if (count != wdt->count)
> + starfive_wdt_set_count(wdt, wdt->count);
> starfive_wdt_enable(wdt);
>
> exit:
> @@ -381,7 +383,7 @@ static int starfive_wdt_pm_start(struct watchdog_device *wdd)
> if (ret < 0)
> return ret;
>
> - ret = starfive_wdt_start(wdt);
> + ret = starfive_wdt_start(wdt, wdt->count);
> if (ret)
> pm_runtime_put_sync(wdd->parent);
>
> @@ -412,11 +414,13 @@ static int starfive_wdt_set_timeout(struct watchdog_device *wdd,
> wdt->count = count;
> wdd->timeout = timeout;
>
> - starfive_wdt_unlock(wdt);
> - starfive_wdt_disable(wdt);
> - starfive_wdt_set_reload_count(wdt, wdt->count);
> - starfive_wdt_enable(wdt);
> - starfive_wdt_lock(wdt);
> + if (watchdog_hw_running(wdd)) {
> + starfive_wdt_unlock(wdt);
> + starfive_wdt_disable(wdt);
> + starfive_wdt_set_reload_count(wdt, wdt->count);
> + starfive_wdt_enable(wdt);
> + starfive_wdt_lock(wdt);
> + }
>
> return 0;
> }
> @@ -497,7 +501,7 @@ static int starfive_wdt_probe(struct platform_device *pdev)
> watchdog_stop_ping_on_suspend(&wdt->wdd);
>
> if (early_enable) {
> - ret = starfive_wdt_start(wdt);
> + ret = starfive_wdt_start(wdt, wdt->count);
> if (ret)
> goto err_exit;
> set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
> @@ -575,14 +579,8 @@ static int starfive_wdt_resume(struct device *dev)
> if (ret)
> return ret;
>
> - if (watchdog_hw_running(&wdt->wdd)) {
> - starfive_wdt_unlock(wdt);
> - /* Restore watchdog state. */
> - starfive_wdt_set_reload_count(wdt, wdt->reload);
> - starfive_wdt_lock(wdt);
> -
> - return starfive_wdt_start(wdt);
> - }
> + if (watchdog_hw_running(&wdt->wdd))
> + return starfive_wdt_start(wdt, wdt->reload);
>
> return 0;
> }
next prev parent reply other threads:[~2026-11-06 14:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-05 19:05 [PATCH v2 0/8] watchdog: starfive-wdt: Fix runtime PM and unclocked register access bugs Guenter Roeck
2026-11-05 19:05 ` [PATCH v2 1/8] watchdog: starfive-wdt: Drop runtime PM reference if starting watchdog fails Guenter Roeck
2026-11-05 19:05 ` [PATCH v2 2/8] watchdog: starfive-wdt: Balance pm_runtime_enable() on probe error paths Guenter Roeck
2026-11-05 19:05 ` [PATCH v2 3/8] watchdog: starfive-wdt: Avoid unclocked register access in remove and PM paths Guenter Roeck
2026-11-06 14:21 ` Tzung-Bi Shih
2026-11-05 19:05 ` [PATCH v2 4/8] watchdog: starfive-wdt: Fix runtime PM usage count leaks in probe and remove Guenter Roeck
2026-11-05 19:05 ` [PATCH v2 5/8] watchdog: starfive-wdt: Drop runtime PM reference before registering watchdog Guenter Roeck
2026-11-05 19:05 ` [PATCH v2 6/8] watchdog: starfive-wdt: Avoid unclocked MMIO read in starfive_wdt_get_timeleft() Guenter Roeck
2026-11-06 14:22 ` Tzung-Bi Shih
2026-11-05 19:05 ` [PATCH v2 7/8] watchdog: starfive-wdt: Stop ping worker on system suspend Guenter Roeck
2026-11-06 14:22 ` Tzung-Bi Shih
2026-11-05 19:05 ` [PATCH v2 8/8] watchdog: starfive-wdt: Avoid unclocked MMIO access in starfive_wdt_set_timeout() Guenter Roeck
2026-11-06 14:21 ` Tzung-Bi Shih [this message]
2026-11-06 15:20 ` Guenter Roeck
2026-11-06 15:51 ` Tzung-Bi Shih
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=au3ibSdPUIKvUWNa@google.com \
--to=tzungbi@kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=xingyu.wu@starfivetech.com \
--cc=ziv.xu@starfivetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.