From: Frank Li <Frank.li@oss.nxp.com>
To: James Hilliard <james.hilliard1@gmail.com>
Cc: "Sean Wang" <sean.wang@mediatek.com>,
"Vinod Koul" <vkoul@kernel.org>, "Frank Li" <Frank.Li@kernel.org>,
"Matthias Brugger" <matthias.bgg@gmail.com>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>,
"Basavaraj Natikar" <Basavaraj.Natikar@amd.com>,
"Jacky Huang" <ychuang3@nuvoton.com>,
"Shan-Chun Hung" <schung@nuvoton.com>,
"Florian Fainelli" <florian.fainelli@broadcom.com>,
"Broadcom internal kernel review list"
<bcm-kernel-feedback-list@broadcom.com>,
"Ray Jui" <rjui@broadcom.com>,
"Scott Branden" <sbranden@broadcom.com>,
"Lars-Peter Clausen" <lars@metafoo.de>,
"Eugeniy Paltsev" <Eugeniy.Paltsev@synopsys.com>,
"Zhou Wang" <wangzhou1@hisilicon.com>,
"Longfang Liu" <liulongfang@huawei.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Keguang Zhang" <keguang.zhang@gmail.com>,
"Binbin Zhou" <zhoubinbin@loongson.cn>,
"Taichi Sugaya" <sugaya.taichi@socionext.com>,
"Takao Orito" <orito.takao@socionext.com>,
"Amélie Delaunay" <amelie.delaunay@foss.st.com>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
"Laxman Dewangan" <ldewangan@nvidia.com>,
"Jon Hunter" <jonathanh@nvidia.com>,
"Thierry Reding" <thierry.reding@kernel.org>,
"Vignesh Raghavendra" <vigneshr@ti.com>,
"Kunihiko Hayashi" <hayashi.kunihiko@socionext.com>,
"Masami Hiramatsu" <mhiramat@kernel.org>,
dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-rpi-kernel@lists.infradead.org, imx@lists.linux.dev,
linux-mips@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: Re: [PATCH v3 1/2] dmaengine: virt-dma: share the DMAengine synchronization callback
Date: Tue, 27 Oct 2026 15:00:28 -0500 [thread overview]
Message-ID: <auEC3HAXyvYHbKDf@SMW015318> (raw)
In-Reply-To: <20261027-submit-mtk-uart-dma-synchronize-v1-v3-1-aad7a6b3c62e@gmail.com>
On Tue, Oct 27, 2026 at 12:22:26PM -0600, James Hilliard wrote:
> Several virt-dma drivers implement device_synchronize with a wrapper that
> only converts the DMA channel and calls vchan_synchronize(). Provide
> vchan_dma_synchronize() with the DMAengine callback signature so these
> drivers can assign it directly.
>
> Document the requirement to stop the channel and prevent new callbacks
> before synchronization, and the context in which the callback wait may
> run. Replace the equivalent wrappers in the existing drivers with the
> shared helper, preserving their callback-wait and descriptor-cleanup
> behavior.
>
> Suggested-by: Frank Li <Frank.li@oss.nxp.com>
> Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
> ---
> drivers/dma/amba-pl08x.c | 11 ++---------
> drivers/dma/amd/ptdma/ptdma-dmaengine.c | 9 +--------
> drivers/dma/arm-dma350.c | 9 +--------
> drivers/dma/bcm2835-dma.c | 9 +--------
> drivers/dma/dma-axi-dmac.c | 9 +--------
> drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 9 +--------
> drivers/dma/fsl-edma-main.c | 9 +--------
> drivers/dma/fsl-qdma.c | 9 +--------
> drivers/dma/hisi_dma.c | 9 +--------
> drivers/dma/hsu/hsu.c | 9 +--------
> drivers/dma/idma64.c | 9 +--------
> drivers/dma/img-mdc-dma.c | 9 +--------
> drivers/dma/k3dma.c | 9 +--------
> drivers/dma/loongson/loongson1-apb-dma.c | 7 +------
> drivers/dma/loongson/loongson2-apb-cmc-dma.c | 9 +--------
> drivers/dma/loongson/loongson2-apb-dma.c | 14 +-------------
> drivers/dma/milbeaut-hdmac.c | 7 +------
> drivers/dma/milbeaut-xdmac.c | 7 +------
> drivers/dma/stm32/stm32-dma.c | 9 +--------
> drivers/dma/stm32/stm32-dma3.c | 9 +--------
> drivers/dma/stm32/stm32-mdma.c | 9 +--------
> drivers/dma/tegra210-adma.c | 9 +--------
> drivers/dma/ti/edma.c | 11 ++---------
> drivers/dma/ti/omap-dma.c | 9 +--------
> drivers/dma/uniphier-mdmac.c | 7 +------
> drivers/dma/uniphier-xdmac.c | 7 +------
> drivers/dma/virt-dma.h | 15 +++++++++++++++
> 27 files changed, 43 insertions(+), 205 deletions(-)
Thanks do such cleanup.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
next prev parent reply other threads:[~2026-10-27 20:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-27 18:22 [PATCH v3 0/2] dmaengine: share virt-dma synchronization and use it for UART APDMA James Hilliard
2026-10-27 18:22 ` [PATCH v3 1/2] dmaengine: virt-dma: share the DMAengine synchronization callback James Hilliard
2026-10-27 20:00 ` Frank Li [this message]
2026-10-28 8:04 ` Andy Shevchenko
2026-10-28 15:18 ` Amelie Delaunay
2026-10-29 12:13 ` Keguang Zhang
2026-10-27 18:22 ` [PATCH v3 2/2] dmaengine: mediatek: uart: synchronize completion callbacks James Hilliard
2026-10-27 20:01 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=auEC3HAXyvYHbKDf@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Basavaraj.Natikar@amd.com \
--cc=Eugeniy.Paltsev@synopsys.com \
--cc=Frank.Li@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=amelie.delaunay@foss.st.com \
--cc=andy@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dmaengine@vger.kernel.org \
--cc=florian.fainelli@broadcom.com \
--cc=hayashi.kunihiko@socionext.com \
--cc=imx@lists.linux.dev \
--cc=james.hilliard1@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=keguang.zhang@gmail.com \
--cc=lars@metafoo.de \
--cc=ldewangan@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=linux-tegra@vger.kernel.org \
--cc=liulongfang@huawei.com \
--cc=matthias.bgg@gmail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mhiramat@kernel.org \
--cc=orito.takao@socionext.com \
--cc=rjui@broadcom.com \
--cc=sbranden@broadcom.com \
--cc=schung@nuvoton.com \
--cc=sean.wang@mediatek.com \
--cc=sugaya.taichi@socionext.com \
--cc=thierry.reding@kernel.org \
--cc=vigneshr@ti.com \
--cc=vkoul@kernel.org \
--cc=wangzhou1@hisilicon.com \
--cc=ychuang3@nuvoton.com \
--cc=zhoubinbin@loongson.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.