All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zorro Lang <zlang@kernel.org>
To: Lukas Herbolt <lukas@herbolt.com>
Cc: fstests@vger.kernel.org
Subject: Re: [PATCH] xfstests: Unify the build targets under LINUX_TARGET
Date: Mon, 2 Nov 2026 15:25:21 +0800	[thread overview]
Message-ID: <aug5aYetKZ46O-J4@zlang-mailbox> (raw)
In-Reply-To: <20261006103937.276181-3-lukas@herbolt.com>

On Tue, Oct 06, 2026 at 12:39:39PM +0200, Lukas Herbolt wrote:
> As discussed previously, the only supported target for now
> is LINUX_TARGET. Merging the TARGET into LINUX_TARGET and
> fix indentation in the Makefile.
> 
> Signed-off-by: Lukas Herbolt <lukas@herbolt.com>
> ---
>  src/Makefile | 55 ++++++++++++++++++++++++++--------------------------
>  1 file changed, 28 insertions(+), 27 deletions(-)
> 
> diff --git a/src/Makefile b/src/Makefile
> index 0ff607ae1593..1f7f9fd61987 100644
> --- a/src/Makefile
> +++ b/src/Makefile
> @@ -6,7 +6,9 @@
>  TOPDIR = ..
>  include $(TOPDIR)/include/builddefs
>  
> -TARGETS = dirstress fill fill2 getpagesize holes lstat64 \
> +TARGETS =
> +
> +LINUX_TARGETS = dirstress fill fill2 getpagesize holes lstat64 \

Since Linux is the only supported platform now, why not just use TARGETS
directly?

Thanks,
Zorro

>  	nametest permname randholes runas truncfile usemem \
>  	mmapcat append_reader append_writer dirperf metaperf \
>  	devzero feature alloc fault fstest t_access_root \
> @@ -21,9 +23,8 @@ TARGETS = dirstress fill fill2 getpagesize holes lstat64 \
>  	t_mmap_writev_overlap checkpoint_journal mmap-rw-fault allocstale \
>  	t_mmap_cow_memory_failure fake-dump-rootino dio-buf-fault rewinddir-test \
>  	readdir-while-renames dio-append-buf-fault dio-write-fsync-same-fd \
> -	dio-writeback-race unlink-fsync truncate dio-read-into-mmap
> -
> -LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
> +	dio-writeback-race unlink-fsync truncate dio-read-into-mmap \
> +	xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
>  	preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
>  	locktest unwritten_mmap bulkstat_unlink_test deduperace \
>  	bulkstat_unlink_test_modified t_dir_offset t_futimens t_immutable \
> @@ -48,68 +49,64 @@ SUBDIRS = log-writes perf
>  LLDLIBS = $(LIBHANDLE) $(LIBACL) -lpthread -lrt -luuid
>  
>  ifeq ($(HAVE_XLOG_ASSIGN_LSN), true)
> -LINUX_TARGETS += loggen
> +    LINUX_TARGETS += loggen
>  endif
>  
>  ifeq ($(HAVE_FIEMAP), true)
> -LINUX_TARGETS += fiemap-tester t_stripealign
> +    LINUX_TARGETS += fiemap-tester t_stripealign
>  endif
>  
>  ifeq ($(HAVE_OPEN_BY_HANDLE_AT), true)
> -LINUX_TARGETS += open_by_handle
> +    LINUX_TARGETS += open_by_handle
>  endif
>  
>  ifeq ($(HAVE_FALLOCATE), true)
> -LCFLAGS += -DHAVE_FALLOCATE
> +    LCFLAGS += -DHAVE_FALLOCATE
>  endif
>  
>  ifeq ($(HAVE_FILE_GETATTR), yes)
> -LINUX_TARGETS += file_attr
> -LCFLAGS += -DHAVE_FILE_GETATTR
> -endif
> -
> -ifeq ($(PKG_PLATFORM),linux)
> -TARGETS += $(LINUX_TARGETS)
> +    LINUX_TARGETS += file_attr
> +    LCFLAGS += -DHAVE_FILE_GETATTR
>  endif
>  
>  ifeq ($(HAVE_DB), true)
> -TARGETS += dbtest
> -LLDLIBS += $(LIBGDBM)
> +    TARGETS += dbtest
> +    LLDLIBS += $(LIBGDBM)
>  endif
>  
>  ifeq ($(HAVE_AIO), true)
> -TARGETS += t_mmap_dio
> -SUBDIRS += aio-dio-regress
> -LLDLIBS += -laio
> +    LINUX_TARGETS += t_mmap_dio
> +    SUBDIRS += aio-dio-regress
> +    LLDLIBS += -laio
>  endif
>  
>  ifeq ($(HAVE_URING), true)
> -LINUX_TARGETS += btrfs_encoded_read btrfs_encoded_write
> -TARGETS += uring_read_fault
> -LLDLIBS += -luring
> +    LINUX_TARGETS += btrfs_encoded_read btrfs_encoded_write \
> +		     uring_read_fault
> +    LLDLIBS += -luring
>  endif
>  
>  SUBDIRS += vfs
>  ifeq ($(HAVE_LIBCAP), true)
> -LLDLIBS += -lcap
> +    LLDLIBS += -lcap
>  endif
>  
>  ifeq ($(HAVE_SEEK_DATA), yes)
>   ifeq ($(HAVE_NFTW), yes)
>    ifeq ($(HAVE_BMV_OF_SHARED), yes)
>     ifeq ($(HAVE_RLIMIT_NOFILE), yes)
> -     TARGETS += xfsfind
> +     LINUX_TARGETS += xfsfind
>     endif
>    endif
>   endif
>  endif
>  
>  ifeq ($(HAVE_FICLONE),yes)
> -     TARGETS += t_reflink_read_race
> +     LINUX_TARGETS += t_reflink_read_race
>  endif
>  
>  ifeq ($(HAVE_FANOTIFY_FID),yes)
> -     TARGETS += fs-monitor
> +     LINUX_TARGETS += fs-monitor
>  endif
>  
>  ifeq ($(HAVE_LIBBTRFSUTIL), true)
> @@ -117,7 +114,11 @@ ifeq ($(HAVE_LIBBTRFSUTIL), true)
>  endif
>  
>  ifeq ($(NEED_INTERNAL_XFS_IOC_EXCHANGE_RANGE),yes)
> -LCFLAGS += -DNEED_INTERNAL_XFS_IOC_EXCHANGE_RANGE
> +     LCFLAGS += -DNEED_INTERNAL_XFS_IOC_EXCHANGE_RANGE
> +endif
> +
> +ifeq ($(PKG_PLATFORM),linux)
> +     TARGETS += $(LINUX_TARGETS)
>  endif
>  
>  CFILES = $(TARGETS:=.c)
> -- 
> 2.55.0
> 

  reply	other threads:[~2026-11-02  7:25 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-06 10:39 [PATCH] xfstests: Unify the build targets under LINUX_TARGET Lukas Herbolt
2026-11-02  7:25 ` Zorro Lang [this message]
2026-11-02 10:01   ` Lukas Herbolt
2026-11-03  9:58     ` Zorro Lang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aug5aYetKZ46O-J4@zlang-mailbox \
    --to=zlang@kernel.org \
    --cc=fstests@vger.kernel.org \
    --cc=lukas@herbolt.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.