From: Rafael Martinez <rafael@viewpoint.no>
To: venkateshr@ami.com
Cc: linux-kernel@vger.kernel.org
Subject: Re: Solution - AMI megaraid driver doesn't work with Linux 2.4.x kernels
Date: Fri, 04 May 2001 10:27:15 +0100 (CEST) [thread overview]
Message-ID: <auto-000000185962@viventus.no> (raw)
In-Reply-To: <002d01c0d3e0$1f4d5270$7253e59b@megatrends.com>
---Reply to mail from Venkatesh Ramamurthy about Solution - AMI megaraid driver doesn't work with Linux 2.4.x kernels
> Can you provide the dmesg output of your system after loading the driver
> either successfully or unsucessfully.
>
Successfully: (Raid 5 4x18GB)
------------------------------------------------------
megaraid: v1.14g (Release Date: Feb 5, 2001; 11:42)
megaraid: found 0x101e:0x1960:idx 0:bus 9:slot 0:func 0
scsi3 : Found a MegaRAID controller at 0xf884e000, IRQ: 17
scsi3 : Enabling 64 bit support
megaraid: [G158:3.11] detected 1 logical drives
scsi3 : AMI MegaRAID G158 254 commands 16 targs 2 chans 40 luns
scsi3: scanning channel 1 for devices.
Vendor: ESG-SHV Model: SCA HSBP M9 Rev: 0.10
Type: Processor ANSI SCSI revision: 02
scsi3: scanning channel 2 for devices.
scsi3: scanning virtual channel for logical drives.
Vendor: MegaRAID Model: LD0 RAID5 52527R Rev: G158
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sdb at scsi3, channel 2, id 0, lun 0
SCSI device sdb: 107575296 512-byte hdwr sectors (55079 MB)
sdb: sdb1
-------------------------------------------------------
When it was unsucessfully, it stoppet in the last line with:
sdb: unknown partition table
(With kernel 2.4.2-2smp from redhat (RH7.1) and "official" 2.4.2, 2.4.3)
The only different between the to instalations is the firmware version
C158 --> G158 of the ami card.
The kernel is a 2.4.2-2smp from redhat (RH7.1). I will test the system with an
"official" ;-) kernel today.
Rafael Martinez
---End reply
prev parent reply other threads:[~2001-05-04 8:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-05-03 15:37 Solution - AMI megaraid driver doesn't work with Linux 2.4.x kernels Rafael Martinez
2001-05-03 14:48 ` Venkatesh Ramamurthy
2001-05-04 9:27 ` Rafael Martinez [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=auto-000000185962@viventus.no \
--to=rafael@viewpoint.no \
--cc=linux-kernel@vger.kernel.org \
--cc=venkateshr@ami.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.