From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Riana Tauro <riana.tauro@intel.com>
Cc: <intel-xe@lists.freedesktop.org>, <anshuman.gupta@intel.com>,
<aravind.iddamsetty@linux.intel.com>, <raag.jadav@intel.com>,
<mallesh.koujalagi@intel.com>, <badal.nilawar@intel.com>
Subject: Re: [PATCH] drm/xe/ras: Remove unnecessary SIGID logging
Date: Tue, 10 Nov 2026 11:59:06 -0500 [thread overview]
Message-ID: <avNNWgTo_tNr94Ew@intel.com> (raw)
In-Reply-To: <20261104090701.1748619-2-riana.tauro@intel.com>
On Wed, Nov 04, 2026 at 02:37:02PM +0530, Riana Tauro wrote:
> Remove SIGID logging for all Double-bit ecc memory errors
Please take a look to the commit message of my duplicated attempt:
https://lore.kernel.org/intel-xe/20261109161733.3769906-2-rodrigo.vivi@intel.com/
I believe we could improve this message a bit here.
>
> No functional changes.
In a way I'd say we do have some functional changes.
>
> Fixes: 12b427cf8bb0 ("drm/xe/xe_ras: Handle page offline requests for device memory ecc errors")
> Fixes: 6d8ad0217f9d ("drm/xe/xe_ras: Add support to query page offline queue and list")
> Suggested-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
> Signed-off-by: Riana Tauro <riana.tauro@intel.com>
> ---
> drivers/gpu/drm/xe/xe_ras.c | 57 ++++++++++++++-----------------------
> 1 file changed, 21 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/gpu/drm/xe/xe_ras.c b/drivers/gpu/drm/xe/xe_ras.c
> index 2c01c183d02b..46e2a40eee95 100644
> --- a/drivers/gpu/drm/xe/xe_ras.c
> +++ b/drivers/gpu/drm/xe/xe_ras.c
> @@ -269,32 +269,29 @@ static int send_page_offline_cmd(struct xe_device *xe, u64 page_address,
> request.action = action;
>
> if (action == XE_RAS_PAGE_ACTION_OFFLINE)
> - xe_log_err(xe, DEVICE_MEMORY, 0, "Requesting firmware to offline page 0x%llx\n",
> - page_address);
> + xe_info(xe, "Requesting firmware to offline page 0x%llx\n", page_address);
> else
> - xe_log_err(xe, DEVICE_MEMORY, 0, "Requesting firmware to remove page 0x%llx from queue\n",
> - page_address);
> + xe_info(xe, "Requesting firmware to remove page 0x%llx from queue\n", page_address);
should we use info or dbg here?!
>
> xe_sysctrl_create_command(&command, XE_SYSCTRL_GROUP_GFSP, XE_SYSCTRL_CMD_PAGE_OFFLINE,
> &request, sizeof(request), &response, sizeof(response));
>
> ret = xe_sysctrl_send_command(&xe->sc, &command, &rlen);
> if (ret) {
> - xe_log_err(xe, SYSCTRL, ret, "failed to send page offline command\n");
> + xe_err(xe, "sysctrl: failed to send page offline command %d\n", ret);
This err is an error pointer and should be handled differently.
But, anyway...
I believe we should only remove the 202 (DEVICE_MEMORY) entries and not the fw
related ones (105 - SYSCTRL).
> return ret;
> }
>
> if (rlen != sizeof(response)) {
> - xe_log_err(xe, SYSCTRL, -EINVAL,
> - "unexpected page offline response length %zu (expected %zu)\n",
> - rlen, sizeof(response));
> + xe_err(xe, "sysctrl: unexpected page offline response length %zu (expected %zu)\n",
> + rlen, sizeof(response));
> return -EINVAL;
> }
>
> ret = ras_status_to_errno(response.status);
> if (ret) {
> - xe_log_err(xe, SYSCTRL, ret, "page offline command failed with status %u\n",
> - response.status);
> + xe_err(xe, "sysctrl: page offline command failed with status %#x\n",
> + response.status);
> return ret;
> }
>
> @@ -318,15 +315,14 @@ static int handle_page_offline(struct xe_device *xe, u64 page_address, bool noti
> int ret;
>
> if (!IS_ALIGNED(page_address, XE_PAGE_SIZE)) {
> - xe_log_err(xe, SYSCTRL, -EINVAL, "Unaligned physical page address: 0x%llx\n",
> - page_address);
> + xe_err(xe, "Unaligned physical page address: 0x%llx\n", page_address);
> return -EINVAL;
> }
>
> /* User policy set to disable page offlining */
> if (xe_ras_get_disable_vram_page_offline(xe)) {
> action = XE_RAS_PAGE_ACTION_REMOVE;
> - xe_log_err(xe, DEVICE_MEMORY, -EOPNOTSUPP, "User policy set to disable page offlining\n");
> + xe_info(xe, "User policy set to disable page offlining\n");
> goto notify;
> }
>
> @@ -346,33 +342,24 @@ static int handle_page_offline(struct xe_device *xe, u64 page_address, bool noti
> switch (ret) {
> case 0:
> action = XE_RAS_PAGE_ACTION_REMOVE;
> - xe_log_err(xe, DEVICE_MEMORY, ret,
> - "Poison detected at physical address 0x%llx, page soft-offlined\n",
> - page_address);
> break;
> case -EIO:
> - xe_log_err(xe, DEVICE_MEMORY, ret,
> - "Poison detected at physical address 0x%llx, page belongs to critical BO and cannot be soft-offlined\n",
> - page_address);
> + xe_err(xe, "Physical page address 0x%llx belongs to critical BO and cannot be soft-offlined\n",
> + page_address);
> return ret;
> case -EEXIST:
> if (xa_load(&state->offlined_pages, page_address >> XE_PTE_SHIFT))
> action = XE_RAS_PAGE_ACTION_REMOVE;
> else
> action = XE_RAS_PAGE_ACTION_OFFLINE;
> -
> - xe_log_err(xe, DEVICE_MEMORY, ret,
> - "Double-bit ECC error detected at physical address 0x%llx, page soft-offlined\n",
> - page_address);
> break;
> case -ENOMEM:
> - xe_log_err(xe, DEVICE_MEMORY, ret,
> - "Poison detected at physical address 0x%llx, failed to soft-offline\n",
> - page_address);
> + xe_err(xe, "Failed to soft-offline page at physical address 0x%llx\n",
> + page_address);
> return ret;
> default:
> - xe_log_err(xe, DEVICE_MEMORY, ret, "Failed to handle address fault at physical address 0x%llx\n",
> - page_address);
> + xe_err(xe, "Failed to handle address fault at physical address 0x%llx\n",
> + page_address);
> return 0;
> }
>
> @@ -433,15 +420,14 @@ static void process_offline_pages(struct xe_device *xe, u32 cmd, void *req, size
>
> ret = xe_sysctrl_send_command(&xe->sc, &command, &rlen);
> if (ret) {
> - xe_log_err(xe, SYSCTRL, ret, "failed to get page offline data, cmd=%#x\n",
> - cmd);
> + xe_err(xe, "sysctrl: failed to get page offline data for cmd %#x, ret %d\n",
> + cmd, ret);
> return;
> }
>
> if (rlen != resp_size) {
> - xe_log_err(xe, SYSCTRL, -EINVAL,
> - "unexpected page offline response length %zu (expected %zu), cmd=%#x\n",
> - rlen, resp_size, cmd);
> + xe_err(xe, "sysctrl: unexpected page offline response length %zu (expected %zu) for cmd %#x\n",
> + rlen, resp_size, cmd);
> return;
> }
>
> @@ -471,9 +457,8 @@ static void process_offline_pages(struct xe_device *xe, u32 cmd, void *req, size
> total_pages = common->total_pages;
>
> if (count > total_pages) {
> - xe_log_err(xe, SYSCTRL, -EINVAL,
> - "Pages returned exceed total pages %u, returned %u, cmd=%#x\n",
> - total_pages, count, cmd);
> + xe_err(xe, "Pages returned exceed total pages %u, returned %u, cmd=%#x\n",
> + total_pages, count, cmd);
> return;
> }
> } while (common->additional_data);
> --
> 2.47.1
>
next prev parent reply other threads:[~2026-11-10 17:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-04 9:07 [PATCH] drm/xe/ras: Remove unnecessary SIGID logging Riana Tauro
2026-11-04 9:16 ` ✓ CI.KUnit: success for " Patchwork
2026-11-04 9:52 ` ✓ Xe.CI.BAT: " Patchwork
2026-11-05 0:49 ` ✓ Xe.CI.FULL: " Patchwork
2026-11-10 16:59 ` Rodrigo Vivi [this message]
2026-11-11 4:20 ` [PATCH] " Tauro, Riana
2026-11-11 15:44 ` Vivi, Rodrigo
2026-11-12 8:36 ` Tauro, Riana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=avNNWgTo_tNr94Ew@intel.com \
--to=rodrigo.vivi@intel.com \
--cc=anshuman.gupta@intel.com \
--cc=aravind.iddamsetty@linux.intel.com \
--cc=badal.nilawar@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=mallesh.koujalagi@intel.com \
--cc=raag.jadav@intel.com \
--cc=riana.tauro@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.