All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko@kernel.org>
To: Siddharth Chintamaneni <sidchintamaneni@gmail.com>,
	Jason Gunthorpe <jgg@ziepe.ca>
Cc: Peter Huewe <peterhuewe@gmx.de>, Jason Gunthorpe <jgg@ziepe.ca>,
	Sudeep Holla <sudeep.holla@kernel.org>,
	Yeoreum Yun <yeoreum.yun@arm.com>,
	Stuart Yoder <stuart.yoder@arm.com>,
	apais@microsoft.com, rachelmenge@linux.microsoft.com,
	hargar@linux.microsoft.com, linux-integrity@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 3/4] tpm: tpm_tis: Use cached tpm2_acpi_start_method
Date: Sun, 15 Nov 2026 15:32:39 +0200	[thread overview]
Message-ID: <avm0d4iOX6V9O0-p@kernel.org> (raw)
In-Reply-To: <20261115013456.212141-4-sidchintamaneni@gmail.com>

On Sun, Nov 15, 2026 at 01:34:55AM +0000, Siddharth Chintamaneni wrote:
> Use the cached tpm2_acpi_start_method value instead of mapping and
> unmapping the ACPI TPM2 table again during probe. Remove
> check_acpi_tpm2() and open-code the start method check directly in
> tpm_tis_init(), returning -ENODEV when the device does not use
> ACPI_TPM2_MEMORY_MAPPED.
> 
> Signed-off-by: Siddharth Chintamaneni <sidchintamaneni@gmail.com>
> ---
>  drivers/char/tpm/tpm_tis.c | 45 +++++---------------------------------
>  1 file changed, 6 insertions(+), 39 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> index 6f8344894ea5..df2d8c1c2be0 100644
> --- a/drivers/char/tpm/tpm_tis.c
> +++ b/drivers/char/tpm/tpm_tis.c
> @@ -127,45 +127,11 @@ static inline int is_itpm(struct acpi_device *dev)
>  #endif
>  
>  #if defined(CONFIG_ACPI)
> -#define DEVICE_IS_TPM2 1
> -
>  static const struct acpi_device_id tpm_acpi_tbl[] = {
> -	{"MSFT0101", DEVICE_IS_TPM2},
> +	{"MSFT0101"},
>  	{},
>  };
>  MODULE_DEVICE_TABLE(acpi, tpm_acpi_tbl);
> -
> -static int check_acpi_tpm2(struct device *dev)
> -{
> -	const struct acpi_device_id *aid = acpi_match_device(tpm_acpi_tbl, dev);
> -	struct acpi_table_tpm2 *tbl;
> -	acpi_status st;
> -	int ret = 0;
> -
> -	if (!aid || aid->driver_data != DEVICE_IS_TPM2)
> -		return 0;


Jason, can you remind me what was the deal with this flag?

> -
> -	/* If the ACPI TPM2 signature is matched then a global ACPI_SIG_TPM2
> -	 * table is mandatory
> -	 */
> -	st = acpi_get_table(ACPI_SIG_TPM2, 1, (struct acpi_table_header **)&tbl);
> -	if (ACPI_FAILURE(st) || tbl->header.length < sizeof(*tbl)) {
> -		dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n");
> -		return -EINVAL;
> -	}
> -
> -	/* The tpm2_crb driver handles this device */
> -	if (tbl->start_method != ACPI_TPM2_MEMORY_MAPPED)
> -		ret = -ENODEV;
> -
> -	acpi_put_table((struct acpi_table_header *)tbl);
> -	return ret;
> -}
> -#else
> -static int check_acpi_tpm2(struct device *dev)
> -{
> -	return 0;
> -}
>  #endif
>  
>  static int tpm_tcg_read_bytes(struct tpm_tis_data *data, u32 addr, u16 len,
> @@ -222,11 +188,12 @@ static int tpm_tis_init(struct device *dev, struct tpm_info *tpm_info)
>  {
>  	struct tpm_tis_tcg_phy *phy;
>  	int irq = -1;
> -	int rc;
>  
> -	rc = check_acpi_tpm2(dev);
> -	if (rc)
> -		return rc;
> +#ifdef CONFIG_ACPI
> +	if (acpi_match_device(tpm_acpi_tbl, dev) &&
> +	    tpm2_acpi_start_method != ACPI_TPM2_MEMORY_MAPPED)
> +		return -ENODEV;
> +#endif
>  
>  	phy = devm_kzalloc_obj(dev, struct tpm_tis_tcg_phy);
>  	if (phy == NULL)
> -- 
> 2.45.4
> 

Br, Jarkko


  reply	other threads:[~2026-11-15 13:32 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-15  1:34 [PATCH v3 0/4] tpm: Cache ACPI TPM2 start method and gate tpm_crb_ffa probe Siddharth Chintamaneni
2026-11-15  1:34 ` [PATCH v3 1/4] tpm: Cache TPM2 start method Siddharth Chintamaneni
2026-11-15  1:34 ` [PATCH v3 2/4] tpm: tpm_crb_ffa: Only probe when ACPI TPM2 uses FF-A Siddharth Chintamaneni
2026-11-15  1:34 ` [PATCH v3 3/4] tpm: tpm_tis: Use cached tpm2_acpi_start_method Siddharth Chintamaneni
2026-11-15 13:32   ` Jarkko Sakkinen [this message]
2026-11-15  1:34 ` [PATCH v3 4/4] tpm: tpm_crb: " Siddharth Chintamaneni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=avm0d4iOX6V9O0-p@kernel.org \
    --to=jarkko@kernel.org \
    --cc=apais@microsoft.com \
    --cc=hargar@linux.microsoft.com \
    --cc=jgg@ziepe.ca \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peterhuewe@gmx.de \
    --cc=rachelmenge@linux.microsoft.com \
    --cc=sidchintamaneni@gmail.com \
    --cc=stuart.yoder@arm.com \
    --cc=sudeep.holla@kernel.org \
    --cc=yeoreum.yun@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.