From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Arnd Bergmann <arnd@arndb.de>,
linux-kernel@vger.kernel.org
Subject: [GIT PULL] Char/Misc/IIO driver fixes for 7.4-rc4
Date: Mon, 16 Nov 2026 11:53:48 +0100 [thread overview]
Message-ID: <avrgvJDaBJit5pfa@kroah.com> (raw)
The following changes since commit 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4:
Linux 7.4-rc1 (2026-11-01 13:26:31 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git tags/char-misc-7.4-rc4
for you to fetch changes up to 4dbe5ea929ac5a5b8dc21787d0e79fc55a0ea9ac:
Merge tag 'iio-fixes-for-7.4a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus (2026-11-11 09:04:02 -0500)
----------------------------------------------------------------
Char/Misc/IIO driver fixes for 7.4-rc4
Here are a bunch of char, misc, and iio driver fixes for reported
problems for 7.4-rc4. Included in here are:
- usual collection of lots of IIO driver fixes for issues
- binder driver fix
- iio, w1, and comedi driver fixes found and fixed by Josef
- comedi driver fix for a reported problem
- other misc driver fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Alexander Sarmanow (1):
iio: light: vcnl4035: Fix reversed ALS mode bit
Alexis Bouzigues (2):
iio: accel: adxl345: select IIO_BUFFER and IIO_KFIFO_BUF
iio: accel: adxl313: add missing buffer selections in Kconfig
Alice Ryhl (1):
rust_binder: push BR_TRANSACTION_COMPLETE before BR_FAILED_REPLY
Andrea Amer (1):
iio: afe: rescale: expose offset if rescaler or source has one
Antonio Vázquez Blanco (1):
mei: me: add ice lake point LP iTouch DID
Arka Mondal (2):
dt-bindings: iio: dac: adi,ad5758: Fix the 4 mA to 20 mA current range
iio: dac: ad5758: Fix the 4 mA to 20 mA current range
Arnav Kapoor (8):
iio: imu: inv_mpu6050: fix magnetometer scale of Y and Z axes
iio: imu: inv_mpu6050: fix swapped accel and gyro startup times
iio: common: scmi_sensors: fix truncating 64-bit divisions
iio: common: cros_ec_sensors: use sensor_scale union member for CALIBSCALE
iio: proximity: sx9324: fix out-of-bounds read of scan period table
iio: adc: mcp3564: reject devices without match data
iio: proximity: sx9360: fix sampling frequency write and available range
iio: proximity: sx9500: ignore event config writes that don't change state
Baek Kyu, Kim (1):
iio: dac: mcp4725: Update the cached DAC value only on success
Billy Tsai (2):
dt-bindings: iio: adc: Add syscon property for multi-SCU SoCs
iio: adc: aspeed: Use syscon phandle for trimming data when available
Changyul Lee (1):
iio: trigger: free the trigger ID after device_del()
Christopher Hoover (2):
iio: temperature: hid-sensor-temperature: Use per-instance callbacks
iio: humidity: hid-sensor-humidity: Use per-instance callbacks
Daniel Schaefer (1):
iio: light: hid-sensor-als: Don't read past the end of short fields
David Carlier (1):
iio: dac: mcp47feb02: reject out-of-range raw values
Greg Kroah-Hartman (1):
Merge tag 'iio-fixes-for-7.4a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Guangshuo Li (2):
iio: accel: kxsd9: Fix potential use-after-free on removal
misc: bcm-vk: fix DMA allocation memory leak
Ian Abbott (1):
comedi: comedi_bond: Fix leak of opened device references
Jan Remes (1):
iio: light: tsl2591: don't divide by zero
Jean-Baptiste Maneyrol (3):
iio: inv_sensors: prevent timestamps going back in time in transitions
iio: inv_sensors: do not compute period estimation when updating odr
iio: imu: inv_icm42600: fix parsing of all FIFO frames for odr change
Jiale Yao (3):
iio: gyro: bmg160: reject duplicate event disable
iio: imu: kmx61: reject duplicate event disable
misc: ibmvmc: initialize HMC state before device registration
Josef Bacik (22):
iio: sx9310: use the data of the I2C table
iio: addac: ad74413r: fix the values of set_multiple
iio: adc: ad7923: add the AD7927 to the SPI ID table
iio: adc: check the result of ad_sd_init()
iio: accel: adxl380: don't stay in standby on -EINVAL
comedi: fix endless recursion in comedi_event()
comedi: addi_apci_1500: fix clearing of the gate enable
comedi: ni_660x: don't poll without a DMA channel
comedi: ni_tio: Fix overflow of the clock period
comedi: vmk80xx: report failed transfers of the K8061
misc: vmw_vmci: wait for callbacks in event unsubscribe
w1: use the bus mutex for the "rw" file
w1: remove the master's files before taking its locks
w1: ds2482: set the strong pull-up with its byte
w1: ds28e04: use the bus mutex to talk on the bus
w1: ds2805: use the bus mutex to talk on the bus
w1: netlink: drop the slave after the bus is unlocked
w1: don't hold list_mutex while a slave is torn down
w1: w1_therm: lock the list of slaves for the bulk read
w1: w1_therm: leave the slaves of other families alone
mei: lb: read the MTU once
iio: hid-sensors: fix a division by zero
Karl Mehltretter (1):
iio: trigger: Return an error when the trigger has no free irq
Loic Poulain (1):
iio: adc: qcom-spmi-adc5-gen3: Reuse IIO device ID for ADC_TM aux device
Maximilian Czirr (1):
iio: hid-sensor: Fix scale for magnetic north heading
Myeonghun Pak (1):
iio: proximity: hx9023s: Allocate trigger before requesting IRQ
Nikhil Gautam (1):
iio: atlas-ezo: Fix humidity channel read support
Salah Triki (1):
iio: temperature: mlx90614: Fix dual channel probe condition check
Shashank Mohan Jain (2):
iio: magnetometer: mmc35240: leave cache-only mode before the cache sync
iio: magnetometer: mmc5633: leave cache-only mode before the cache sync
Srinivas Pandruvada (1):
iio: hid-sensors: fix fractional part for unit exponents -7 and -8
Vidhu Sarwal (1):
iio: humidity: am2315: fix negative temperature decoding
Viral Patel (1):
iio: magnetometer: tlv493d: fix magnetic field scale
Yu-Hsiang Tseng (1):
iio: acpi: Accept comma separated values in ROTM strings
.../bindings/iio/adc/aspeed,ast2600-adc.yaml | 17 ++++
.../devicetree/bindings/iio/dac/adi,ad5758.yaml | 4 +-
drivers/android/binder/error.rs | 1 -
drivers/android/binder/thread.rs | 31 +++----
drivers/comedi/comedi_fops.c | 2 +-
drivers/comedi/drivers/addi_apci_1500.c | 2 +-
drivers/comedi/drivers/comedi_bond.c | 24 ++++--
drivers/comedi/drivers/ni_660x.c | 3 +-
drivers/comedi/drivers/ni_tio.c | 2 +-
drivers/comedi/drivers/vmk80xx.c | 25 +++---
drivers/iio/accel/Kconfig | 4 +
drivers/iio/accel/adxl380.c | 11 ++-
drivers/iio/accel/kxsd9.c | 2 +-
drivers/iio/adc/ad7780.c | 4 +-
drivers/iio/adc/ad7791.c | 4 +-
drivers/iio/adc/ad7793.c | 4 +-
drivers/iio/adc/ad7923.c | 1 +
drivers/iio/adc/aspeed_adc.c | 25 ++++--
drivers/iio/adc/max11205.c | 4 +-
drivers/iio/adc/mcp3564.c | 3 +
drivers/iio/adc/qcom-spmi-adc5-gen3.c | 5 +-
drivers/iio/addac/ad74413r.c | 2 +-
drivers/iio/afe/iio-rescale.c | 3 +-
drivers/iio/chemical/atlas-ezo-sensor.c | 3 -
.../iio/common/cros_ec_sensors/cros_ec_sensors.c | 5 +-
.../iio/common/hid-sensors/hid-sensor-attributes.c | 14 +++-
.../iio/common/inv_sensors/inv_sensors_timestamp.c | 24 ++++--
drivers/iio/common/scmi_sensors/scmi_iio.c | 27 +++---
drivers/iio/dac/ad5758.c | 4 +-
drivers/iio/dac/mcp4725.c | 2 +
drivers/iio/dac/mcp47feb02-core.c | 3 +
drivers/iio/gyro/bmg160_core.c | 2 +-
drivers/iio/humidity/am2315.c | 12 ++-
drivers/iio/humidity/hid-sensor-humidity.c | 14 ++--
drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c | 24 +++---
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 97 +++++++++++++++++-----
drivers/iio/imu/kmx61.c | 2 +-
drivers/iio/industrialio-acpi.c | 9 ++
drivers/iio/industrialio-trigger.c | 4 +-
drivers/iio/light/hid-sensor-als.c | 16 +++-
drivers/iio/light/tsl2591.c | 32 ++++---
drivers/iio/light/vcnl4035.c | 4 +-
drivers/iio/magnetometer/mmc35240.c | 3 +-
drivers/iio/magnetometer/mmc5633.c | 3 +-
drivers/iio/magnetometer/tlv493d.c | 6 +-
drivers/iio/proximity/hx9023s.c | 16 ++--
drivers/iio/proximity/sx9310.c | 2 +-
drivers/iio/proximity/sx9324.c | 13 ++-
drivers/iio/proximity/sx9360.c | 29 +++++--
drivers/iio/proximity/sx9500.c | 6 ++
drivers/iio/temperature/hid-sensor-temperature.c | 14 ++--
drivers/iio/temperature/mlx90614.c | 2 +-
drivers/misc/bcm-vk/bcm_vk_sg.c | 43 ++++++++--
drivers/misc/ibmvmc.c | 16 ++--
drivers/misc/mei/hw-me-regs.h | 1 +
drivers/misc/mei/mei_lb.c | 12 ++-
drivers/misc/mei/pci-me.c | 1 +
drivers/misc/vmw_vmci/vmci_event.c | 7 +-
drivers/w1/masters/ds2482.c | 36 ++++----
drivers/w1/slaves/w1_ds2805.c | 8 +-
drivers/w1/slaves/w1_ds28e04.c | 18 ++--
drivers/w1/slaves/w1_therm.c | 45 ++++++----
drivers/w1/w1.c | 21 +++--
drivers/w1/w1_int.c | 8 +-
drivers/w1/w1_netlink.c | 8 +-
include/linux/iio/common/inv_sensors_timestamp.h | 3 +-
66 files changed, 549 insertions(+), 253 deletions(-)
next reply other threads:[~2026-11-16 10:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 10:53 Greg KH [this message]
2026-11-16 17:17 ` [GIT PULL] Char/Misc/IIO driver fixes for 7.4-rc4 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=avrgvJDaBJit5pfa@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.