From: Andy Shevchenko <andriy.shevchenko@intel.com>
To: Joseph Telaak <joseph@telaak.dev>
Cc: "Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Peter Rosin" <peda@lysator.liu.se>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux@analog.com, devicetree@vger.kernel.org
Subject: Re: [PATCH 5/5] iio: potentiometer: mcp4018: Add Analog Devices AD5246
Date: Tue, 17 Nov 2026 10:27:04 +0200 [thread overview]
Message-ID: <avwP2P1zTgFteODM@ashevche-desk.local> (raw)
In-Reply-To: <20261116-iio-ad5246-v1-5-ef6b7c06d4b0@telaak.dev>
On Mon, Nov 16, 2026 at 05:59:54PM -0500, Joseph Telaak wrote:
> The AD5246 is a 128-position digital rheostat with the same I2C
> interface as the MCP4017/18/19: a single data byte writes the 7-bit
> wiper and a single-byte read returns it, with no command byte. Add its
> four resistance options.
>
> Its resistance is D/128 of the end-to-end value, where the MCP401x's is
> D/127, so the scale divisor moves into the per-part config.
>
> The misc ad525x_dpot driver also knows the AD5246, by I2C id only and
> through its own sysfs files. It can't provide an IIO channel, which a
> consumer such as dpot-dac needs. The AD5272 is likewise in both drivers.
>
> Tested on an AD5246 at 0x2e that sets a fan's speed, described as
> adi,ad5246-010 with a vdd-supply. It probes, out_resistance0_raw_available
> reads [0 1 127] and out_resistance_scale reads 78.125000000. Raw writes
> of 0, 64, 100 and 127 read back the same value, and 128 is rejected.
> Writes through iio_write_channel_raw() from an in-kernel consumer of the
> channel read back as well (127, 38, 0 and 76).
...
> config MCP4018
> - tristate "Microchip MCP4017/18/19 Digital Potentiometer driver"
> + tristate "Microchip MCP4017/18/19 and Analog Devices AD5246 Digital Potentiometer driver"
Make it shorter and more generic, in this way you spread the same text to the
top comment in the file
- * Industrial I/O driver for Microchip digital potentiometers
+ * Industrial I/O driver for $SAME_TEXT_AS_PER_ABOVE
and to MODULE_DESCRIPTION().
For example,
tristate "Microchip MCP4018 and compatible Digital Potentiometer driver"
* Industrial I/O driver for Microchip MCP4018 and compatible Digital Potentiometer
MODULE_DESCRIPTION("Microchip MCP4018 and compatible Digital Potentiometer driver").
> depends on I2C
> help
> Say yes here to build support for the Microchip
> - MCP4017, MCP4018, MCP4019
> - digital potentiometer chips.
> + MCP4017, MCP4018, MCP4019 digital potentiometer chips
> + and the Analog Devices AD5246 digital rheostat.
And here make it list that is scalable to expand
Say yes here to build support for the Microchip
digital potentiometer chips:
- MCP4017, MCP4018, MCP4019
and Analog Devices digital rheostats:
- AD5246
> To compile this driver as a module, choose M here: the
> module will be called mcp4018.
...
> * DEVID #Wipers #Positions Resistor Opts (kOhm)
> * mcp4017 1 128 5, 10, 50, 100
> * mcp4018 1 128 5, 10, 50, 100
> * mcp4019 1 128 5, 10, 50, 100
> + * ad5246 1 128 5, 10, 50, 100
Keep it sorted.
...
> struct mcp4018_cfg {
> int kohms;
> + /* Wiper position divisor: R = raw * kohms / div. */
> + int div;
Why signed? Can the HW return something negative?
> };
...
> enum mcp4018_type {
> MCP4018_103,
> MCP4018_503,
> MCP4018_104,
> + AD5246_005,
> + AD5246_010,
> + AD5246_050,
> + AD5246_100,
Keep it sorted.
> };
...
> static const struct mcp4018_cfg mcp4018_cfg[] = {
> - [MCP4018_502] = { .kohms = 5, },
> - [MCP4018_103] = { .kohms = 10, },
> - [MCP4018_503] = { .kohms = 50, },
> - [MCP4018_104] = { .kohms = 100, },
> + [MCP4018_502] = { .kohms = 5, .div = MCP4018_WIPER_MAX, },
> + [MCP4018_103] = { .kohms = 10, .div = MCP4018_WIPER_MAX, },
> + [MCP4018_503] = { .kohms = 50, .div = MCP4018_WIPER_MAX, },
> + [MCP4018_104] = { .kohms = 100, .div = MCP4018_WIPER_MAX, },
Strictly speaking this patch can be split to two:
- adding 'div' member and providing it for the existing chips
- adding new chip support
> + /* The AD5246's resistance is D / 128 of the end-to-end value. */
> + [AD5246_005] = { .kohms = 5, .div = 128, },
> + [AD5246_010] = { .kohms = 10, .div = 128, },
> + [AD5246_050] = { .kohms = 50, .div = 128, },
> + [AD5246_100] = { .kohms = 100, .div = 128, },
Keep it sorted.
> };
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2026-11-17 8:27 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 22:59 [PATCH 0/5] iio: potentiometer: mcp4018: Add Analog Devices AD5246 Joseph Telaak
2026-11-16 22:59 ` [PATCH 1/5] iio: ABI: Move out_resistance_raw_available to sysfs-bus-iio Joseph Telaak
2026-11-17 8:10 ` Andy Shevchenko
2026-11-17 8:20 ` Joseph Telaak
2026-11-16 22:59 ` [PATCH 2/5] iio: potentiometer: mcp4018: Report the available wiper positions Joseph Telaak
2026-11-17 8:13 ` Andy Shevchenko
2026-11-17 19:35 ` Joseph Telaak
2026-11-16 22:59 ` [PATCH 3/5] dt-bindings: iio: potentiometer: Add Analog Devices AD5246 Joseph Telaak
2026-11-17 17:43 ` Conor Dooley
2026-11-17 20:04 ` Joseph Telaak
2026-11-16 22:59 ` [PATCH 4/5] iio: potentiometer: mcp4018: Turn on the vdd supply Joseph Telaak
2026-11-17 8:16 ` Andy Shevchenko
2026-11-17 8:25 ` Joseph Telaak
2026-11-16 22:59 ` [PATCH 5/5] iio: potentiometer: mcp4018: Add Analog Devices AD5246 Joseph Telaak
2026-11-17 8:27 ` Andy Shevchenko [this message]
2026-11-17 19:31 ` Joseph Telaak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=avwP2P1zTgFteODM@ashevche-desk.local \
--to=andriy.shevchenko@intel.com \
--cc=Michael.Hennerich@analog.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=joseph@telaak.dev \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@analog.com \
--cc=nuno.sa@analog.com \
--cc=peda@lysator.liu.se \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.